Code: Alles auswählen
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 24
On-line CPU(s) list: 0-23
Thread(s) per core: 2
Core(s) per socket: 6
Socket(s): 2
NUMA node(s): 2
Vendor ID: GenuineIntel
CPU family: 6
Model: 85
Model name: Intel(R) Xeon(R) Gold 6128 CPU @ 3.40GHz
Stepping: 4
CPU MHz: 1199.992
BogoMIPS: 6800.00
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 1024K
L3 cache: 19712K
NUMA node0 CPU(s): 0,2,4,6,8,10,12,14,16,18,20,22
NUMA node1 CPU(s): 1,3,5,7,9,11,13,15,17,19,21,23
Code: Alles auswählen
root@fra1:~# /usr/bin/cpupower frequency-set -g performance
Setting cpu: 0
Error setting new values. Common errors:
- Do you have proper administration rights? (super-user?)
- Is the governor you requested available and modprobed?
- Trying to set an invalid policy?
- Trying to set a specific frequency, but userspace governor is not available,
for example because of hardware which cannot be set to a specific frequency
or because the userspace governor isn't loaded?
root@fra1:~#
Code: Alles auswählen
root@fra1:~# uname -r
4.14.0-3-amd64
root@fra1:~# dmesg | grep "command line"
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0-3-amd64 root=UUID=dac15d8d-6f74-4e9a-848c-12d22e6273b0 ro intel_iommu=on pci=realloc nohz=off ipv6.disable=1 processor.max_cstate=0 intel_idle.max_cstate=0 quiet
root@fra1:~# lsmod | grep -E 'state|cpu'
cpufreq_powersave 16384 0
intel_cstate 16384 0
cpufreq_conservative 16384 0
cpufreq_userspace 16384 0
root@mfra1:~#
Gruss, mistersixt.