Nee, kein gutes Zeichen. dmesg bestätigt das:
Code: Alles auswählen
root@BerndsPC-7-2014:/home/bernd# dmesg
[ 2.965081] ata2.00: error: { ABRT }
[ 2.965863] ata2.00: configured for UDMA/133 (device error ignored)
[ 2.965868] ata2: EH complete
[ 2.976993] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2.977680] ata2.00: irq_stat 0x40000001
[ 2.978352] ata2.00: failed command: READ DMA
[ 2.979034] ata2.00: cmd c8/00:02:04:00:00/00:00:00:00:00/e0 tag 15 dma 1024 in
res 51/04:02:04:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 2.980397] ata2.00: status: { DRDY ERR }
[ 2.981084] ata2.00: error: { ABRT }
[ 2.981860] ata2.00: configured for UDMA/133 (device error ignored)
[ 2.981864] ata2: EH complete
[ 2.992993] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2.993676] ata2.00: irq_stat 0x40000001
[ 2.994347] ata2.00: failed command: READ DMA
[ 2.995029] ata2.00: cmd c8/00:02:04:00:00/00:00:00:00:00/e0 tag 17 dma 1024 in
res 51/04:02:04:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 2.996396] ata2.00: status: { DRDY ERR }
[ 2.997078] ata2.00: error: { ABRT }
DASSELBE kommt jetzt x mal wieder.
Code: Alles auswählen
[ 6.905265] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.905275] ata2: EH complete
[ 6.917069] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.917070] ata2.00: irq_stat 0x40000001
[ 6.917071] ata2.00: failed command: READ DMA
[ 6.917075] ata2.00: cmd c8/00:02:80:70:7b/00:00:00:00:00/e0 tag 9 dma 1024 in
res 51/04:02:80:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 6.917076] ata2.00: status: { DRDY ERR }
[ 6.917077] ata2.00: error: { ABRT }
[ 6.917261] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.917271] ata2: EH complete
[ 6.929069] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.929070] ata2.00: irq_stat 0x40000001
[ 6.929072] ata2.00: failed command: READ DMA
[ 6.929075] ata2.00: cmd c8/00:02:80:70:7b/00:00:00:00:00/e0 tag 13 dma 1024 in
res 51/04:02:80:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 6.929076] ata2.00: status: { DRDY ERR }
[ 6.929077] ata2.00: error: { ABRT }
[ 6.929197] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.929209] sd 1:0:0:0: [sdb] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 6.929210] sd 1:0:0:0: [sdb] tag#13 Sense Key : Illegal Request [current]
[ 6.929213] sd 1:0:0:0: [sdb] tag#13 Add. Sense: Unaligned write command
[ 6.929215] sd 1:0:0:0: [sdb] tag#13 CDB: Read(10) 28 00 00 7b 70 80 00 00 02 00
[ 6.929216] blk_update_request: I/O error, dev sdb, sector 8089728
[ 6.929217] buffer_io_error: 42 callbacks suppressed
[ 6.929218] Buffer I/O error on dev sdb, logical block 4044864, async page read
[ 6.929223] ata2: EH complete
[ 6.941076] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.941077] ata2.00: irq_stat 0x40000001
[ 6.941078] ata2.00: failed command: READ DMA
[ 6.941082] ata2.00: cmd c8/00:02:82:70:7b/00:00:00:00:00/e0 tag 19 dma 1024 in
res 51/04:02:82:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 6.941083] ata2.00: status: { DRDY ERR }
[ 6.941084] ata2.00: error: { ABRT }
[ 6.941947] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.941958] ata2: EH complete
[ 6.953077] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.953078] ata2.00: irq_stat 0x40000001
[ 6.953079] ata2.00: failed command: READ DMA
[ 6.953083] ata2.00: cmd c8/00:02:82:70:7b/00:00:00:00:00/e0 tag 22 dma 1024 in
res 51/04:02:82:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 6.953084] ata2.00: status: { DRDY ERR }
[ 6.953085] ata2.00: error: { ABRT }
[ 6.953266] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.953277] ata2: EH complete
[ 6.965074] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.965075] ata2.00: irq_stat 0x40000001
[ 6.965076] ata2.00: failed command: READ DMA
[ 6.965080] ata2.00: cmd c8/00:02:82:70:7b/00:00:00:00:00/e0 tag 26 dma 1024 in
res 51/04:02:82:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 6.965081] ata2.00: status: { DRDY ERR }
[ 6.965082] ata2.00: error: { ABRT }
[ 6.965235] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.965245] ata2: EH complete
[ 6.981071] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.981072] ata2.00: irq_stat 0x40000001
[ 6.981083] ata2.00: failed command: READ DMA
[ 6.981087] ata2.00: cmd c8/00:02:82:70:7b/00:00:00:00:00/e0 tag 30 dma 1024 in
res 51/04:02:82:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 6.981088] ata2.00: status: { DRDY ERR }
[ 6.981088] ata2.00: error: { ABRT }
[ 6.981232] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.981243] ata2: EH complete
[ 6.993066] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.993067] ata2.00: irq_stat 0x40000001
[ 6.993068] ata2.00: failed command: READ DMA
[ 6.993072] ata2.00: cmd c8/00:02:82:70:7b/00:00:00:00:00/e0 tag 3 dma 1024 in
res 51/04:02:82:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 6.993073] ata2.00: status: { DRDY ERR }
[ 6.993074] ata2.00: error: { ABRT }
[ 6.993374] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.993384] ata2: EH complete
[ 7.005075] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 7.005786] ata2.00: irq_stat 0x40000001
[ 7.006485] ata2.00: failed command: READ DMA
[ 7.007184] ata2.00: cmd c8/00:02:82:70:7b/00:00:00:00:00/e0 tag 7 dma 1024 in
res 51/04:02:82:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 7.008594] ata2.00: status: { DRDY ERR }
[ 7.009331] ata2.00: error: { ABRT }
[ 7.010189] ata2.00: configured for UDMA/133 (device error ignored)
[ 7.010200] sd 1:0:0:0: [sdb] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7.010202] sd 1:0:0:0: [sdb] tag#7 Sense Key : Illegal Request [current]
[ 7.010204] sd 1:0:0:0: [sdb] tag#7 Add. Sense: Unaligned write command
[ 7.010206] sd 1:0:0:0: [sdb] tag#7 CDB: Read(10) 28 00 00 7b 70 82 00 00 02 00
[ 7.010208] blk_update_request: I/O error, dev sdb, sector 8089730
[ 7.010943] Buffer I/O error on dev sdb, logical block 4044865, async page read
[ 7.011680] ata2: EH complete
[ 7.021534] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 7.022308] ata2.00: irq_stat 0x40000001
[ 7.023037] ata2.00: failed command: READ DMA
[ 7.023757] ata2.00: cmd c8/00:04:84:70:7b/00:00:00:00:00/e0 tag 13 dma 2048 in
res 51/04:04:84:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 7.025262] ata2.00: status: { DRDY ERR }
[ 7.025978] ata2.00: error: { ABRT }
[ 7.026800] ata2.00: configured for UDMA/133 (device error ignored)
[ 7.026810] ata2: EH complete
[ 7.037099] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 7.037100] ata2.00: irq_stat 0x40000001
[ 7.037102] ata2.00: failed command: READ DMA
[ 7.037106] ata2.00: cmd c8/00:04:84:70:7b/00:00:00:00:00/e0 tag 21 dma 2048 in
res 51/04:04:84:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 7.037107] ata2.00: status: { DRDY ERR }
[ 7.037107] ata2.00: error: { ABRT }
[ 7.037228] ata2.00: configured for UDMA/133 (device error ignored)
[ 7.037243] ata2: EH complete
[ 7.053076] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 7.053830] ata2.00: irq_stat 0x40000001
[ 7.054568] ata2.00: failed command: READ DMA
[ 7.055295] ata2.00: cmd c8/00:04:84:70:7b/00:00:00:00:00/e0 tag 23 dma 2048 in
res 51/04:04:84:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 7.056765] ata2.00: status: { DRDY ERR }
[ 7.057531] ata2.00: error: { ABRT }
[ 7.060327] ata2.00: configured for UDMA/133 (device error ignored)
[ 7.060340] ata2: EH complete
[ 7.069075] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 7.069816] ata2.00: irq_stat 0x40000001
[ 7.070552] ata2.00: failed command: READ DMA
[ 7.070555] ata2.00: cmd c8/00:04:84:70:7b/00:00:00:00:00/e0 tag 27 dma 2048 in
res 51/04:04:84:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 7.070556] ata2.00: status: { DRDY ERR }
[ 7.070557] ata2.00: error: { ABRT }
[ 7.070754] ata2.00: configured for UDMA/133 (device error ignored)
[ 7.070765] ata2: EH complete
[ 7.082568] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 7.083302] ata2.00: irq_stat 0x40000001
[ 7.084028] ata2.00: failed command: READ DMA
[ 7.084757] ata2.00: cmd c8/00:04:84:70:7b/00:00:00:00:00/e0 tag 0 dma 2048 in
res 51/04:04:84:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 7.086207] ata2.00: status: { DRDY ERR }
[ 7.086948] ata2.00: error: { ABRT }
[ 7.087830] ata2.00: configured for UDMA/133 (device error ignored)
[ 7.087840] ata2: EH complete
[ 7.097162] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 7.097893] ata2.00: irq_stat 0x40000001
[ 7.098614] ata2.00: failed command: READ DMA
[ 7.099360] ata2.00: cmd c8/00:04:84:70:7b/00:00:00:00:00/e0 tag 4 dma 2048 in
res 51/04:04:84:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 7.100787] ata2.00: status: { DRDY ERR }
[ 7.101567] ata2.00: error: { ABRT }
[ 7.102507] ata2.00: configured for UDMA/133 (device error ignored)
[ 7.102519] sd 1:0:0:0: [sdb] tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7.102521] sd 1:0:0:0: [sdb] tag#4 Sense Key : Illegal Request [current]
[ 7.102523] sd 1:0:0:0: [sdb] tag#4 Add. Sense: Unaligned write command
[ 7.102524] sd 1:0:0:0: [sdb] tag#4 CDB: Read(10) 28 00 00 7b 70 84 00 00 04 00
[ 7.102525] blk_update_request: I/O error, dev sdb, sector 8089732
[ 7.103240] Buffer I/O error on dev sdb, logical block 4044866, async page read
[ 7.103949] Buffer I/O error on dev sdb, logical block 4044867, async page read
[ 7.104683] random: crng init done
So geht das 5km weiter. Immer schön gespickt mit "Error" "FAILED" etc. pp.
Code: Alles auswählen
[ 6.180359] PM: Starting manual resume from disk
[ 6.180361] PM: Hibernation image partition 8:5 present
[ 6.180361] PM: Looking for hibernation image.
[ 6.180462] PM: Image not found (code -22)
[ 6.180463] PM: Hibernation image not present or could not be loaded.
[ 6.253850] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.358648] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.364756] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 6.364864] systemd[1]: Detected architecture x86-64.
[ 6.365063] systemd[1]: Set hostname to <BerndsPC-7-2014>.
[ 6.413869] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 6.413922] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 6.413971] systemd[1]: Listening on Journal Audit Socket.
[ 6.414002] systemd[1]: Listening on Journal Socket.
[ 6.414096] systemd[1]: Created slice System Slice.
[ 6.414396] systemd[1]: Mounting Debug File System...
[ 6.414486] systemd[1]: Created slice system-getty.slice.
[ 6.428141] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 6.431480] lp: driver loaded but no devices found
[ 6.432662] ppdev: user-space parallel port driver
[ 6.440883] fuse init (API version 7.26)
[ 6.440951] RPC: Registered named UNIX socket transport module.
[ 6.440951] RPC: Registered udp transport module.
[ 6.440952] RPC: Registered tcp transport module.
[ 6.440953] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.473298] systemd-journald[244]: Received request to flush runtime journal from PID 1
[ 6.741649] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.742943] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 6.743137] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.744024] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 6.744394] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 6.744791] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 6.744792] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 6.744793] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 6.744793] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 6.744794] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 6.744803] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 6.755100] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 6.755104] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 6.771137] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 6.771139] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.771140] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.771141] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.771142] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.771143] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 6.771144] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 6.771145] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 6.773171] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.773911] ata2.00: irq_stat 0x40000001
[ 6.774640] ata2.00: failed command: READ DMA
[ 6.775369] ata2.00: cmd c8/00:08:80:70:7b/00:00:00:00:00/e0 tag 21 dma 4096 in
res 51/04:08:80:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 6.776831] ata2.00: status: { DRDY ERR }
[ 6.777569] ata2.00: error: { ABRT }
[ 6.779027] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.779037] ata2: EH complete
[ 6.785597] Adding 33301500k swap on /dev/sda5. Priority:-1 extents:1 across:33301500k SSFS
[ 6.790317] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.790318] ata2.00: irq_stat 0x40000001
[ 6.790320] ata2.00: failed command: READ DMA
[ 6.790323] ata2.00: cmd c8/00:08:80:70:7b/00:00:00:00:00/e0 tag 23 dma 4096 in
res 51/04:08:80:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 6.790324] ata2.00: status: { DRDY ERR }
[ 6.790325] ata2.00: error: { ABRT }
[ 6.790450] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.790460] ata2: EH complete
[ 6.797653] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 6.797693] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 6.797731] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 6.797776] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 6.797813] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 6.799919] intel_rapl: Found RAPL domain package
[ 6.799920] intel_rapl: Found RAPL domain core
[ 6.799920] intel_rapl: Found RAPL domain uncore
[ 6.799921] intel_rapl: Found RAPL domain dram
[ 6.803512] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.804282] ata2.00: irq_stat 0x40000001
[ 6.805035] ata2.00: failed command: READ DMA
[ 6.805793] ata2.00: cmd c8/00:08:80:70:7b/00:00:00:00:00/e0 tag 26 dma 4096 in
res 51/04:08:80:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 6.807298] ata2.00: status: { DRDY ERR }
[ 6.808046] ata2.00: error: { ABRT }
[ 6.808908] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.808916] ata2: EH complete
[ 6.810649] iTCO_vendor_support: vendor-support=0
[ 6.811357] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.811388] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 6.811466] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.818672] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.818673] ata2.00: irq_stat 0x40000001
[ 6.818675] ata2.00: failed command: READ DMA
[ 6.818679] ata2.00: cmd c8/00:08:80:70:7b/00:00:00:00:00/e0 tag 29 dma 4096 in
res 51/04:08:80:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 6.818680] ata2.00: status: { DRDY ERR }
[ 6.818681] ata2.00: error: { ABRT }
[ 6.818805] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.818814] ata2: EH complete
[ 6.833179] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.833180] ata2.00: irq_stat 0x40000001
[ 6.833182] ata2.00: failed command: READ DMA
[ 6.833185] ata2.00: cmd c8/00:08:80:70:7b/00:00:00:00:00/e0 tag 13 dma 4096 in
res 51/04:08:80:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 6.833186] ata2.00: status: { DRDY ERR }
[ 6.833187] ata2.00: error: { ABRT }
[ 6.833688] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.833707] ata2: EH complete
[ 6.845866] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.845867] ata2.00: irq_stat 0x40000001
[ 6.845868] ata2.00: failed command: READ DMA
[ 6.845872] ata2.00: cmd c8/00:08:80:70:7b/00:00:00:00:00/e0 tag 15 dma 4096 in
res 51/04:08:80:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 6.845873] ata2.00: status: { DRDY ERR }
[ 6.845874] ata2.00: error: { ABRT }
[ 6.846376] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.846385] scsi_io_completion: 42 callbacks suppressed
[ 6.846388] sd 1:0:0:0: [sdb] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 6.846390] sd 1:0:0:0: [sdb] tag#15 Sense Key : Illegal Request [current]
[ 6.846392] sd 1:0:0:0: [sdb] tag#15 Add. Sense: Unaligned write command
[ 6.846394] sd 1:0:0:0: [sdb] tag#15 CDB: Read(10) 28 00 00 7b 70 80 00 00 08 00
[ 6.846395] blk_update_request: 42 callbacks suppressed
[ 6.846395] blk_update_request: I/O error, dev sdb, sector 8089728
[ 6.846405] ata2: EH complete
[ 6.861079] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.861080] ata2.00: irq_stat 0x40000001
[ 6.861081] ata2.00: failed command: READ DMA
[ 6.861085] ata2.00: cmd c8/00:02:80:70:7b/00:00:00:00:00/e0 tag 30 dma 1024 in
res 51/04:02:80:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 6.861086] ata2.00: status: { DRDY ERR }
[ 6.861087] ata2.00: error: { ABRT }
[ 6.861201] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.861210] ata2: EH complete
[ 6.877075] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.877076] ata2.00: irq_stat 0x40000001
[ 6.877077] ata2.00: failed command: READ DMA
[ 6.877081] ata2.00: cmd c8/00:02:80:70:7b/00:00:00:00:00/e0 tag 1 dma 1024 in
res 51/04:02:80:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 6.877082] ata2.00: status: { DRDY ERR }
[ 6.877083] ata2.00: error: { ABRT }
[ 6.879392] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.879401] ata2: EH complete
[ 6.893071] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.893072] ata2.00: irq_stat 0x40000001
[ 6.893074] ata2.00: failed command: READ DMA
[ 6.893087] ata2.00: cmd c8/00:02:80:70:7b/00:00:00:00:00/e0 tag 3 dma 1024 in
res 51/04:02:80:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 6.893088] ata2.00: status: { DRDY ERR }
[ 6.893088] ata2.00: error: { ABRT }
[ 6.893202] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.893211] ata2: EH complete
[ 6.905094] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.905095] ata2.00: irq_stat 0x40000001
[ 6.905096] ata2.00: failed command: READ DMA
[ 6.905100] ata2.00: cmd c8/00:02:80:70:7b/00:00:00:00:00/e0 tag 7 dma 1024 in
res 51/04:02:80:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 6.905101] ata2.00: status: { DRDY ERR }
[ 6.905101] ata2.00: error: { ABRT }
[ 6.905265] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.905275] ata2: EH complete
[ 6.917069] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.917070] ata2.00: irq_stat 0x40000001
[ 6.917071] ata2.00: failed command: READ DMA
[ 6.917075] ata2.00: cmd c8/00:02:80:70:7b/00:00:00:00:00/e0 tag 9 dma 1024 in
res 51/04:02:80:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 6.917076] ata2.00: status: { DRDY ERR }
[ 6.917077] ata2.00: error: { ABRT }
[ 6.917261] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.917271] ata2: EH complete
[ 6.929069] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.929070] ata2.00: irq_stat 0x40000001
[ 6.929072] ata2.00: failed command: READ DMA
[ 6.929075] ata2.00: cmd c8/00:02:80:70:7b/00:00:00:00:00/e0 tag 13 dma 1024 in
res 51/04:02:80:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 6.929076] ata2.00: status: { DRDY ERR }
[ 6.929077] ata2.00: error: { ABRT }
[ 6.929197] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.929209] sd 1:0:0:0: [sdb] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 6.929210] sd 1:0:0:0: [sdb] tag#13 Sense Key : Illegal Request [current]
[ 6.929213] sd 1:0:0:0: [sdb] tag#13 Add. Sense: Unaligned write command
[ 6.929215] sd 1:0:0:0: [sdb] tag#13 CDB: Read(10) 28 00 00 7b 70 80 00 00 02 00
[ 6.929216] blk_update_request: I/O error, dev sdb, sector 8089728
[ 6.929217] buffer_io_error: 42 callbacks suppressed
[ 6.929218] Buffer I/O error on dev sdb, logical block 4044864, async page read
[ 6.929223] ata2: EH complete
[ 6.941076] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.941077] ata2.00: irq_stat 0x40000001
[ 6.941078] ata2.00: failed command: READ DMA
[ 6.941082] ata2.00: cmd c8/00:02:82:70:7b/00:00:00:00:00/e0 tag 19 dma 1024 in
res 51/04:02:82:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 6.941083] ata2.00: status: { DRDY ERR }
[ 6.941084] ata2.00: error: { ABRT }
[ 6.941947] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.941958] ata2: EH complete
[ 6.953077] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.953078] ata2.00: irq_stat 0x40000001
[ 6.953079] ata2.00: failed command: READ DMA
[ 6.953083] ata2.00: cmd c8/00:02:82:70:7b/00:00:00:00:00/e0 tag 22 dma 1024 in
res 51/04:02:82:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 6.953084] ata2.00: status: { DRDY ERR }
[ 6.953085] ata2.00: error: { ABRT }
[ 6.953266] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.953277] ata2: EH complete
[ 6.965074] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.965075] ata2.00: irq_stat 0x40000001
[ 6.965076] ata2.00: failed command: READ DMA
[ 6.965080] ata2.00: cmd c8/00:02:82:70:7b/00:00:00:00:00/e0 tag 26 dma 1024 in
res 51/04:02:82:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 6.965081] ata2.00: status: { DRDY ERR }
[ 6.965082] ata2.00: error: { ABRT }
[ 6.965235] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.965245] ata2: EH complete
[ 6.981071] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.981072] ata2.00: irq_stat 0x40000001
[ 6.981083] ata2.00: failed command: READ DMA
[ 6.981087] ata2.00: cmd c8/00:02:82:70:7b/00:00:00:00:00/e0 tag 30 dma 1024 in
res 51/04:02:82:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 6.981088] ata2.00: status: { DRDY ERR }
[ 6.981088] ata2.00: error: { ABRT }
[ 6.981232] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.981243] ata2: EH complete
[ 6.993066] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.993067] ata2.00: irq_stat 0x40000001
[ 6.993068] ata2.00: failed command: READ DMA
[ 6.993072] ata2.00: cmd c8/00:02:82:70:7b/00:00:00:00:00/e0 tag 3 dma 1024 in
res 51/04:02:82:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 6.993073] ata2.00: status: { DRDY ERR }
[ 6.993074] ata2.00: error: { ABRT }
[ 6.993374] ata2.00: configured for UDMA/133 (device error ignored)
[ 6.993384] ata2: EH complete
[ 7.005075] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 7.005786] ata2.00: irq_stat 0x40000001
[ 7.006485] ata2.00: failed command: READ DMA
[ 7.007184] ata2.00: cmd c8/00:02:82:70:7b/00:00:00:00:00/e0 tag 7 dma 1024 in
res 51/04:02:82:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 7.008594] ata2.00: status: { DRDY ERR }
[ 7.009331] ata2.00: error: { ABRT }
[ 7.010189] ata2.00: configured for UDMA/133 (device error ignored)
[ 7.010200] sd 1:0:0:0: [sdb] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7.010202] sd 1:0:0:0: [sdb] tag#7 Sense Key : Illegal Request [current]
[ 7.010204] sd 1:0:0:0: [sdb] tag#7 Add. Sense: Unaligned write command
[ 7.010206] sd 1:0:0:0: [sdb] tag#7 CDB: Read(10) 28 00 00 7b 70 82 00 00 02 00
[ 7.010208] blk_update_request: I/O error, dev sdb, sector 8089730
[ 7.010943] Buffer I/O error on dev sdb, logical block 4044865, async page read
[ 7.011680] ata2: EH complete
[ 7.021534] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 7.022308] ata2.00: irq_stat 0x40000001
[ 7.023037] ata2.00: failed command: READ DMA
[ 7.023757] ata2.00: cmd c8/00:04:84:70:7b/00:00:00:00:00/e0 tag 13 dma 2048 in
res 51/04:04:84:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 7.025262] ata2.00: status: { DRDY ERR }
[ 7.025978] ata2.00: error: { ABRT }
[ 7.026800] ata2.00: configured for UDMA/133 (device error ignored)
[ 7.026810] ata2: EH complete
[ 7.037099] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 7.037100] ata2.00: irq_stat 0x40000001
[ 7.037102] ata2.00: failed command: READ DMA
[ 7.037106] ata2.00: cmd c8/00:04:84:70:7b/00:00:00:00:00/e0 tag 21 dma 2048 in
res 51/04:04:84:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 7.037107] ata2.00: status: { DRDY ERR }
[ 7.037107] ata2.00: error: { ABRT }
[ 7.037228] ata2.00: configured for UDMA/133 (device error ignored)
[ 7.037243] ata2: EH complete
[ 7.053076] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 7.053830] ata2.00: irq_stat 0x40000001
[ 7.054568] ata2.00: failed command: READ DMA
[ 7.055295] ata2.00: cmd c8/00:04:84:70:7b/00:00:00:00:00/e0 tag 23 dma 2048 in
res 51/04:04:84:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 7.056765] ata2.00: status: { DRDY ERR }
[ 7.057531] ata2.00: error: { ABRT }
[ 7.060327] ata2.00: configured for UDMA/133 (device error ignored)
[ 7.060340] ata2: EH complete
[ 7.069075] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 7.069816] ata2.00: irq_stat 0x40000001
[ 7.070552] ata2.00: failed command: READ DMA
[ 7.070555] ata2.00: cmd c8/00:04:84:70:7b/00:00:00:00:00/e0 tag 27 dma 2048 in
res 51/04:04:84:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 7.070556] ata2.00: status: { DRDY ERR }
[ 7.070557] ata2.00: error: { ABRT }
[ 7.070754] ata2.00: configured for UDMA/133 (device error ignored)
[ 7.070765] ata2: EH complete
[ 7.082568] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 7.083302] ata2.00: irq_stat 0x40000001
[ 7.084028] ata2.00: failed command: READ DMA
[ 7.084757] ata2.00: cmd c8/00:04:84:70:7b/00:00:00:00:00/e0 tag 0 dma 2048 in
res 51/04:04:84:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 7.086207] ata2.00: status: { DRDY ERR }
[ 7.086948] ata2.00: error: { ABRT }
[ 7.087830] ata2.00: configured for UDMA/133 (device error ignored)
[ 7.087840] ata2: EH complete
[ 7.097162] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 7.097893] ata2.00: irq_stat 0x40000001
[ 7.098614] ata2.00: failed command: READ DMA
[ 7.099360] ata2.00: cmd c8/00:04:84:70:7b/00:00:00:00:00/e0 tag 4 dma 2048 in
res 51/04:04:84:70:7b/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 7.100787] ata2.00: status: { DRDY ERR }
[ 7.101567] ata2.00: error: { ABRT }
[ 7.102507] ata2.00: configured for UDMA/133 (device error ignored)
[ 7.102519] sd 1:0:0:0: [sdb] tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7.102521] sd 1:0:0:0: [sdb] tag#4 Sense Key : Illegal Request [current]
[ 7.102523] sd 1:0:0:0: [sdb] tag#4 Add. Sense: Unaligned write command
[ 7.102524] sd 1:0:0:0: [sdb] tag#4 CDB: Read(10) 28 00 00 7b 70 84 00 00 04 00
[ 7.102525] blk_update_request: I/O error, dev sdb, sector 8089732
[ 7.103240] Buffer I/O error on dev sdb, logical block 4044866, async page read
[ 7.103949] Buffer I/O error on dev sdb, logical block 4044867, async page read
[ 7.104683] random: crng init done
Was für ein Wahnsinn. Jetzt nur noch eine Frage: Mainboard-Fehler und daher Bios updaten? Oder eher Harddisk-Fehler und darum ausbauen, sichern und austauschen?