ich habe habe einen USB2 zu IDE adapter
Code: Alles auswählen
lsusb
Bus 001 Device 007: ID 05e3:0702 Genesys Logic, Inc. USB 2.0 IDE Adapter [GL811E]
Deshalb gehe ich davon aus, daß der Adapter richtig funktioniert.
Leider eben bei der 2,5" Festplatte nicht.
IBM Travelstar, Model DARA-206000, 6,00 GB ATA/IDE, Herstellungsjahr FEB-2000
Code: Alles auswählen
sudo lsusb -vs 001:007
Bus 001 Device 007: ID 05e3:0702 Genesys Logic, Inc. USB 2.0 IDE Adapter [GL811E]
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x05e3 Genesys Logic, Inc.
idProduct 0x0702 USB 2.0 IDE Adapter [GL811E]
bcdDevice 0.33
iManufacturer 0
iProduct 1 USB TO IDE
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0020
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 96mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
can't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
cannot read device status, Resource temporarily unavailable (11)
Code: Alles auswählen
sudo fdisk -l
Gibt es andere Befehle mit denen ich die Platte einem /dev/xxyz zuordnen kann?
Oder Befehle mit denen eine weitere Analyse möglich ist?
Vielen Dank für Hilfe.
wckl
(Ich entschuldige mich für das Listing hier, aber es ist hoffentlich noch erträglich.)