Ich habe mir auf meinem neuen Rechner Debian Squeeze (Testing) und der proprietäre Treiber fglrx von ATI installiert. Nun sind aber Teile des Grafikbildschirms fehlerhaft; Fensterinhalte werden bei Mausbewegungen plötzlich schwarz und 3D Programme funktionieren nicht richtig. Das Compositing lässt sich nicht aktivieren, mit der Meldung, es werde durch eine andere Anwendung ausgesetzt.
Wenn ich zwei Kerne des Quad-Prozessors im BIOS deaktiviere, gibt's weniger Fehler und nach zwei Versuchen lässt sich dann auch das Compositing aktivieren was dann, solange es aktiviert ist, keine Grafikfehler mehr zur Folge hat...
Was läuft da falsch?
Grüsse Fabian
Code: Alles auswählen
$ more /var/log/kdm.log
SELinux: Disabled on system, not enabling in X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
QFont::fromString: Invalid description 'Serif,20,5,0,50,0'
QFont::fromString: Invalid description 'Sans Serif,10,5,0,50,0'
QFont::fromString: Invalid description 'Sans Serif,10,5,0,75,0'
komplett
gekürzt:
Code: Alles auswählen
$ more /var/log/Xorg.0.log
...
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.74.4
(II) ATI Proprietary Linux Driver Version Identifier:8.74.4
(II) ATI Proprietary Linux Driver Release Identifier: 8.741
(II) ATI Proprietary Linux Driver Build Date: May 27 2010 12:52:57
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Chipset Supported AMD Graphics Processor (0x68B8) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:0:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:2:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:9:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:10:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
...Code: Alles auswählen
$ lspci
00:00.0 Host bridge: ATI Technologies Inc RX780/RX790 Chipset Host Bridge
00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A)
00:09.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port E)
00:0a.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series]
01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series]
02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 02)
03:00.0 Ethernet controller: Atheros Communications AR8131 Gigabit Ethernet (rev c0)Code: Alles auswählen
$ LIBGL_DEBUG=verbose fglrxinfo
libGL: XF86DRIGetClientDriverName: 8.74.4 fglrx (screen 0)
libGL: OpenDriver: trying /usr/lib32/dri/tls/fglrx_dri.so
libGL: OpenDriver: trying /usr/lib32/dri/fglrx_dri.so
libGL: OpenDriver: trying /usr/lib64/dri/tls/fglrx_dri.so
libGL: OpenDriver: trying /usr/lib64/dri/fglrx_dri.so
libGL: XF86DRIGetClientDriverName: 8.74.4 fglrx (screen 0)
libGL: OpenDriver: trying /usr/lib32/dri/tls/fglrx_dri.so
libGL: OpenDriver: trying /usr/lib32/dri/fglrx_dri.so
libGL: OpenDriver: trying /usr/lib64/dri/tls/fglrx_dri.so
libGL: OpenDriver: trying /usr/lib64/dri/fglrx_dri.so
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 5, (OK)
ukiOpenByBusid: ukiOpenMinor returns 5
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Radeon HD 5700 Series
OpenGL version string: 4.0.9901 Compatibility Profile ContextCode: Alles auswählen
$ more /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
Option "BusType" "PCIE"
### 2D-Optionen
Option "no_accel" "no" # XAA Beschleunigung on(no)/off(yes)
Option "AccelMethod" "XAA" # 2D-Hardware-Acceleration XAA, EXA
### 3D-Optionen
Option "FSAAEnable" "on" # Antialiasing
Option "FSAAScale" "2" # 0,2,4,6
### TV-Out-Optionen
Option "NoTV" "no"
Option "TVFormat" "PAL-G"
Option "TVStandard" "VIDEO" # VIDEO, SCART, YUV
Option "TVOverscan" "true"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
