xrandr: Failed to get size of gamma for output default

KDE, Gnome, Windowmanager, X11, Grafiktreiber und alles was dazu notwendig ist. Schau auch in den "Tipps und Tricks"-Bereich.
Antworten
bumer
Beiträge: 238
Registriert: 02.07.2014 12:29:15

xrandr: Failed to get size of gamma for output default

Beitrag von bumer » 03.04.2017 13:19:12

Hallo,

ich habe mir ein neues Lenovo Thinkpad L460 zugelegt. Die Auflösung ist auf 1920 x 1080 eingestellt. Ich möchte diese herunterkurbeln, da mir langsam die Augen weh tun, kriege aber dauernd folgende Fehlermeldung:

Code: Alles auswählen

xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1920 x 1080, current 1920 x 1080, maximum 1920 x 1080
default connected 1920x1080+0+0 0mm x 0mm
   1920x1080     77.00*
Ich weiß so langsam nicht mehr weiter. Hier noch einige Zusatzinfos:

Code: Alles auswählen

Graphics:  Card: Intel Device 1916
           Display Server: X.org 1.16.4 drivers: fbdev,intel (unloaded: vesa)
           tty size: 147x11 Advanced Data: N/A for root
Das Modul 'vesa' kriege ich nicht geladen. Ich habe auch folgendes versucht:

Code: Alles auswählen

[root@debian ~ ]# Xorg -configure 
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/bross:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X.Org X Server 1.16.4
Release Date: 2014-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
Current Operating System: Linux bross 3.16.0-4-amd64 #1 SMP Debian 3.16.39-1+deb8u2 (2017-03-07) x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/bross--vg-root ro ipv6.disable=1 apparmor=1 security=apparmor quiet
Build Date: 11 February 2015  12:32:02AM
xorg-server 2:1.16.4-1 (http://www.debian.org/support) 
Current version of pixman: 0.32.6
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr  3 11:52:44 2017
List of video drivers:
        cirrus
        nouveau
        qxl
        radeon
        fbdev
        trident
        neomagic
        siliconmotion
        mach64
        savage
        openchrome
        tdfx
        vmware
        r128
        ati
        intel
        mga
        sisusb
        vesa
        modesetting
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Xorg detected your mouse at device /dev/input/mice.
Please check your config if the mouse is still not
operational, as by default Xorg tries to autodetect
the protocol.
Your xorg.conf file is /root/xorg.conf.new
To test the server, run 'X -config /root/xorg.conf.new'
(EE) Server terminated with error (2). Closing log file.
Das hat auch nichts gebracht. Das Module Vesa habe ich noch zusätzlich in die xorg.conf eingefügt:

Code: Alles auswählen

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"                  # [<bool>]
        #Option     "Rotate"                    # <str>
        #Option     "fbdev"                     # <str>
        #Option     "debug"                     # [<bool>]
        Identifier  "Card0"
        Driver      "fbdev"
        Driver      "vesa"
        Driver      "intel"
        BusID       "PCI:0:2:0"
EndSection
Hat auch nichts geändert.
Hier noch lscpi:

Code: Alles auswählen

[root@debian ~ ]# lspci
00:00.0 Host bridge: Intel Corporation Device 1904 (rev 08)
00:02.0 VGA compatible controller: Intel Corporation Device 1916 (rev 07)
00:14.0 USB controller: Intel Corporation Device 9d2f (rev 21)
00:14.2 Signal processing controller: Intel Corporation Device 9d31 (rev 21)
00:16.0 Communication controller: Intel Corporation Device 9d3a (rev 21)
00:17.0 SATA controller: Intel Corporation Device 9d03 (rev 21)
00:1c.0 PCI bridge: Intel Corporation Device 9d10 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Device 9d48 (rev 21)
00:1f.2 Memory controller: Intel Corporation Device 9d21 (rev 21)
00:1f.3 Audio device: Intel Corporation Device 9d70 (rev 21)
00:1f.4 SMBus: Intel Corporation Device 9d23 (rev 21)
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection I219-LM (rev 21)
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 522a (rev 01)
Was kann ich machen um die Auflösung zu ändern? Bitte um Hilfe.

Viele Grüße,
bumer

Benutzeravatar
hikaru
Moderator
Beiträge: 13585
Registriert: 09.04.2008 12:48:59

Re: xrandr: Failed to get size of gamma for output default

Beitrag von hikaru » 03.04.2017 13:51:39

Jessie ist zu alt für die GPU. Du brauchst entweder Kernel und Grafiktreiber aus den Backports, oder du gehst gleich auf Stretch.

bumer
Beiträge: 238
Registriert: 02.07.2014 12:29:15

Re: xrandr: Failed to get size of gamma for output default

Beitrag von bumer » 03.04.2017 14:48:16

hikaru hat geschrieben:Jessie ist zu alt für die GPU. Du brauchst entweder Kernel und Grafiktreiber aus den Backports, oder du gehst gleich auf Stretch.
Und jetzt rate mal, stretch ist auch zu alt: Gerade ein --dist-upgrade auf stretch durchgeführt, das Problem bleibt weiterhin, auch mit Kernel 4.9.0, bestehen. Wie geil ist das denn, da könnte man sich glatt erschießen.

bumer
Beiträge: 238
Registriert: 02.07.2014 12:29:15

Re: xrandr: Failed to get size of gamma for output default

Beitrag von bumer » 03.04.2017 14:49:13

Muss ich jetzt den Ubuntu-Sch.... installieren, oder wie...?

Benutzeravatar
MSfree
Beiträge: 10759
Registriert: 25.09.2007 19:59:30

Re: xrandr: Failed to get size of gamma for output default

Beitrag von MSfree » 03.04.2017 15:20:27

bumer hat geschrieben:Und jetzt rate mal, stretch ist auch zu alt:
Da steck doch ein Skylake drin, also nichts wirklich brandaktuelles.

Hast du die für den Skylake nötige Firmware installiert?

bumer
Beiträge: 238
Registriert: 02.07.2014 12:29:15

Re: xrandr: Failed to get size of gamma for output default

Beitrag von bumer » 03.04.2017 15:24:14

MSfree hat geschrieben:
bumer hat geschrieben:Und jetzt rate mal, stretch ist auch zu alt:
Da steck doch ein Skylake drin, also nichts wirklich brandaktuelles.

Hast du die für den Skylake nötige Firmware installiert?
Wusste gar nicht, dass man das zusätzlich installieren muss, dachte die Treiber müssten schon im Kernel enthalten sein. Hast du 'ne Ahnung wo's die Treiber gibt? Mein googleln war erfolglos.

Benutzeravatar
hikaru
Moderator
Beiträge: 13585
Registriert: 09.04.2008 12:48:59

Re: xrandr: Failed to get size of gamma for output default

Beitrag von hikaru » 03.04.2017 15:27:26

bumer hat geschrieben:Wusste gar nicht, dass man das zusätzlich installieren muss, dachte die Treiber müssten schon im Kernel enthalten sein.
Sind sie auch.
Die Firmware ist aber non-free, daher liegt die nicht im Kernel.
bumer hat geschrieben:Hast du 'ne Ahnung wo's die Treiber gibt?
Debianfirmware-misc-nonfree

bumer
Beiträge: 238
Registriert: 02.07.2014 12:29:15

Re: xrandr: Failed to get size of gamma for output default

Beitrag von bumer » 03.04.2017 15:54:09

hikaru hat geschrieben:
bumer hat geschrieben:Hast du 'ne Ahnung wo's die Treiber gibt?
Debianfirmware-misc-nonfree
Funktioniert auch mit diesem Paket nicht. Habs gerade unter stretch installiert. Das Problem bleibt weiter bestehen... :(
Fäält Euch vielleicht noch was ein? :hail:
ps. Ein Reboot hat stattgefunden.

Benutzeravatar
hikaru
Moderator
Beiträge: 13585
Registriert: 09.04.2008 12:48:59

Re: xrandr: Failed to get size of gamma for output default

Beitrag von hikaru » 03.04.2017 16:01:47

bumer hat geschrieben:Fäält Euch vielleicht noch was ein? :hail:
Logs posten könnte helfen. Insbesondere Xorg.0.log dürfte interessant sein.

bumer
Beiträge: 238
Registriert: 02.07.2014 12:29:15

Re: xrandr: Failed to get size of gamma for output default

Beitrag von bumer » 03.04.2017 16:16:52

hikaru hat geschrieben:
bumer hat geschrieben:Fäält Euch vielleicht noch was ein? :hail:
Logs posten könnte helfen. Insbesondere Xorg.0.log dürfte interessant sein.
habe auch folgende Treiber installiert, auch erfolglos:
https://01.org/linuxgraphics/downloads/firmware

Der Xorg-Log:

Code: Alles auswählen

[    28.380] (**) Option "xkb_layout" "de"
[    28.421] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[    28.421] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[    28.421] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    28.421] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    28.421] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    28.421] (II) Using input driver 'libinput' for 'Video Bus'
[    28.421] (**) Video Bus: always reports core events
[    28.421] (**) Option "Device" "/dev/input/event7"
[    28.421] (**) Option "_source" "server/udev"
[    28.421] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[    28.422] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[    28.440] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event7"
[    28.440] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    28.440] (**) Option "xkb_model" "pc105"
[    28.440] (**) Option "xkb_layout" "de"
[    28.441] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[    28.441] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[    28.441] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    28.441] (II) No input driver specified, ignoring this device.
[    28.441] (II) This device may have been added with another device file.
[    28.442] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[    28.442] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    28.442] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    28.442] (II) Using input driver 'libinput' for 'Sleep Button'
[    28.442] (**) Sleep Button: always reports core events
[    28.442] (**) Option "Device" "/dev/input/event4"
[    28.442] (**) Option "_source" "server/udev"
[    28.442] (II) input device 'Sleep Button', /dev/input/event4 is tagged by udev as: Keyboard
[    28.442] (II) input device 'Sleep Button', /dev/input/event4 is a keyboard
[    28.456] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event4"
[    28.456] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    28.456] (**) Option "xkb_model" "pc105"
[    28.456] (**) Option "xkb_layout" "de"
[    28.457] (II) input device 'Sleep Button', /dev/input/event4 is tagged by udev as: Keyboard
[    28.457] (II) input device 'Sleep Button', /dev/input/event4 is a keyboard
[    28.458] (II) config/udev: Adding input device CHICONY USB NetVista Full Width Keyboard (/dev/input/event1)
[    28.458] (**) CHICONY USB NetVista Full Width Keyboard: Applying InputClass "evdev keyboard catchall"
[    28.458] (**) CHICONY USB NetVista Full Width Keyboard: Applying InputClass "libinput keyboard catchall"
[    28.458] (II) Using input driver 'libinput' for 'CHICONY USB NetVista Full Width Keyboard'
[    28.458] (**) CHICONY USB NetVista Full Width Keyboard: always reports core events
[    28.458] (**) Option "Device" "/dev/input/event1"
[    28.458] (**) Option "_source" "server/udev"
[    28.459] (II) input device 'CHICONY USB NetVista Full Width Keyboard', /dev/input/event1 is tagged by udev as: Keyboard
[    28.459] (II) input device 'CHICONY USB NetVista Full Width Keyboard', /dev/input/event1 is a keyboard
[    28.472] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.1/1-3.4.1:1.0/0003:04B3:3025.0001/input/input2/event1"
[    28.472] (II) XINPUT: Adding extended input device "CHICONY USB NetVista Full Width Keyboard" (type: KEYBOARD, id 9)
[    28.472] (**) Option "xkb_model" "pc105"
[    28.472] (**) Option "xkb_layout" "de"
[    28.474] (II) input device 'CHICONY USB NetVista Full Width Keyboard', /dev/input/event1 is tagged by udev as: Keyboard
[    28.474] (II) input device 'CHICONY USB NetVista Full Width Keyboard', /dev/input/event1 is a keyboard
[    28.475] (II) config/udev: Adding input device PixArt Lenovo USB Optical Mouse (/dev/input/event2)
[    28.475] (**) PixArt Lenovo USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    28.475] (**) PixArt Lenovo USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[    28.475] (II) Using input driver 'libinput' for 'PixArt Lenovo USB Optical Mouse'
[    28.476] (**) PixArt Lenovo USB Optical Mouse: always reports core events
[    28.476] (**) Option "Device" "/dev/input/event2"
[    28.476] (**) Option "_source" "server/udev"
[    28.537] (II) input device 'PixArt Lenovo USB Optical Mouse', /dev/input/event2 is tagged by udev as: Mouse
[    28.537] (II) input device 'PixArt Lenovo USB Optical Mouse', /dev/input/event2 is a pointer caps
[    28.568] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2:1.0/0003:17EF:6019.0002/input/input3/event2"
[    28.569] (II) XINPUT: Adding extended input device "PixArt Lenovo USB Optical Mouse" (type: MOUSE, id 10)
[    28.569] (**) Option "AccelerationScheme" "none"
[    28.569] (**) PixArt Lenovo USB Optical Mouse: (accel) selected scheme none/0
[    28.569] (**) PixArt Lenovo USB Optical Mouse: (accel) acceleration factor: 2.000
[    28.569] (**) PixArt Lenovo USB Optical Mouse: (accel) acceleration threshold: 4
[    28.629] (II) input device 'PixArt Lenovo USB Optical Mouse', /dev/input/event2 is tagged by udev as: Mouse
[    28.629] (II) input device 'PixArt Lenovo USB Optical Mouse', /dev/input/event2 is a pointer caps
[    28.631] (II) config/udev: Adding input device PixArt Lenovo USB Optical Mouse (/dev/input/mouse0)
[    28.631] (II) No input driver specified, ignoring this device.
[    28.631] (II) This device may have been added with another device file.
[    28.632] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[    28.632] (II) No input driver specified, ignoring this device.
[    28.632] (II) This device may have been added with another device file.
[    28.633] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event10)
[    28.633] (II) No input driver specified, ignoring this device.
[    28.633] (II) This device may have been added with another device file.
[    28.634] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[    28.634] (II) No input driver specified, ignoring this device.
[    28.634] (II) This device may have been added with another device file.
[    28.634] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event12)
[    28.634] (II) No input driver specified, ignoring this device.
[    28.634] (II) This device may have been added with another device file.
[    28.634] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[    28.634] (II) No input driver specified, ignoring this device.
[    28.634] (II) This device may have been added with another device file.
[    28.634] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[    28.634] (II) No input driver specified, ignoring this device.
[    28.634] (II) This device may have been added with another device file.
[    28.634] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[    28.634] (II) No input driver specified, ignoring this device.
[    28.634] (II) This device may have been added with another device file.
[    28.635] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
[    28.635] (II) No input driver specified, ignoring this device.
[    28.635] (II) This device may have been added with another device file.
[    28.635] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event16)
[    28.635] (II) No input driver specified, ignoring this device.
[    28.635] (II) This device may have been added with another device file.
[    28.635] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    28.635] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    28.635] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    28.635] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    28.635] (**) AT Translated Set 2 keyboard: always reports core events
[    28.635] (**) Option "Device" "/dev/input/event0"
[    28.635] (**) Option "_source" "server/udev"
[    28.635] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    28.635] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    28.652] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    28.652] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    28.652] (**) Option "xkb_model" "pc105"
[    28.652] (**) Option "xkb_layout" "de"
[    28.652] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    28.652] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    28.653] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    28.653] (II) No input driver specified, ignoring this device.
[    28.653] (II) This device may have been added with another device file.
[    28.654] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event8)
[    28.654] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[    28.654] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[    28.654] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[    28.654] (**) ThinkPad Extra Buttons: always reports core events
[    28.654] (**) Option "Device" "/dev/input/event8"
[    28.654] (**) Option "_source" "server/udev"
[    28.654] (II) input device 'ThinkPad Extra Buttons', /dev/input/event8 is tagged by udev as: Keyboard
[    28.654] (II) input device 'ThinkPad Extra Buttons', /dev/input/event8 is a keyboard
[    28.676] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input8/event8"
[    28.676] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 12)
[    28.676] (**) Option "xkb_model" "pc105"
[    28.676] (**) Option "xkb_layout" "de"
[    28.678] (II) input device 'ThinkPad Extra Buttons', /dev/input/event8 is tagged by udev as: Keyboard
[    28.678] (II) input device 'ThinkPad Extra Buttons', /dev/input/event8 is a keyboard

Benutzeravatar
hikaru
Moderator
Beiträge: 13585
Registriert: 09.04.2008 12:48:59

Re: xrandr: Failed to get size of gamma for output default

Beitrag von hikaru » 03.04.2017 16:37:37

bumer hat geschrieben:habe auch folgende Treiber installiert, auch erfolglos:
https://01.org/linuxgraphics/downloads/firmware
Wie? Warum? Wohin?
Abgesehen von der optionalen HuC-Firmware steckt im Debianpaket genau das Gleiche.
bumer hat geschrieben:Der Xorg-Log:
...sieht unvollständig aus. Ich würde sagen, vorne fehlen rund 200 Zeilen. Und das Ende sieht auch nicht so aus, als wäre das Log da zu Ende.
Prüfe bitte, woran das liegt! In dem "Ausschnitt" sind nur Informationen zu Eingabegeräten vorhanden. Und schiebe Logs bitte zukünftig nach Nopaste!

Falls du noch eine xorg.conf hast, dann schieb die mal beiseite! Ich weiß nicht, welche Auswirkungen die auf das Log hat. Jedenfalls solltest du sie nicht brauchen.

bumer
Beiträge: 238
Registriert: 02.07.2014 12:29:15

Re: xrandr: Failed to get size of gamma for output default

Beitrag von bumer » 03.04.2017 16:46:00

sorry, hier der komplette Log:
NoPaste-Eintrag39794

Benutzeravatar
MSfree
Beiträge: 10759
Registriert: 25.09.2007 19:59:30

Re: xrandr: Failed to get size of gamma for output default

Beitrag von MSfree » 03.04.2017 17:16:04

bumer hat geschrieben:Habs gerade unter stretch installiert. Das Problem bleibt weiter bestehen... :(
Das Firmware-Paket muß zum Kernel passen. Wenn du einen Backport-Kernel installierst, muß auch die Firmware aus den Backports verwendet werden. Zumindest unter Jessie wirst du für den Skylake einen Backportkernel brauchen.

Die entsprechenden (Miß)erfolgsmeldungen bezüglich der Firmware wirst du im Xorg-Log nicht finden, die müßten im Systemlog (journalctl, dmesg, cat var/log/messages) zu finden sein.

bumer
Beiträge: 238
Registriert: 02.07.2014 12:29:15

Re: xrandr: Failed to get size of gamma for output default

Beitrag von bumer » 04.04.2017 08:54:57

MSfree hat geschrieben:
bumer hat geschrieben:Habs gerade unter stretch installiert. Das Problem bleibt weiter bestehen... :(
Das Firmware-Paket muß zum Kernel passen. Wenn du einen Backport-Kernel installierst, muß auch die Firmware aus den Backports verwendet werden. Zumindest unter Jessie wirst du für den Skylake einen Backportkernel brauchen.

Die entsprechenden (Miß)erfolgsmeldungen bezüglich der Firmware wirst du im Xorg-Log nicht finden, die müßten im Systemlog (journalctl, dmesg, cat var/log/messages) zu finden sein.
Ich habe die Backports nicht genutzt, sondern ein --dist-upgrade auf stretch gemacht und dann die Firmware installiert.
Im Syslog/dmesg ist nichts drin.

So, also muss ich mich Desktop-mäßig wohl von Debian varabschieden und Ubuntu installieren, wie toll.

Benutzeravatar
hikaru
Moderator
Beiträge: 13585
Registriert: 09.04.2008 12:48:59

Re: xrandr: Failed to get size of gamma for output default

Beitrag von hikaru » 04.04.2017 08:59:47

bumer hat geschrieben:sorry, hier der komplette Log:
NoPaste-Eintrag39794
Laut dem Log wird fbdev statt des Intel-Treibers genutzt. Das erklärt die Probleme. Warum fbdev benutzt wird wäre jetzt zu ermitteln.

Was sagt?:

Code: Alles auswählen

dpkg -l
bumer hat geschrieben:So, also muss ich mich Desktop-mäßig wohl von Debian varabschieden und Ubuntu installieren, wie toll.
Wenn du so schnell aufgibst, dann wäre Ubuntu vermutlich tatsächlich die bessere Wahl.

bumer
Beiträge: 238
Registriert: 02.07.2014 12:29:15

Re: xrandr: Failed to get size of gamma for output default

Beitrag von bumer » 05.04.2017 12:21:54

hikaru hat geschrieben:
bumer hat geschrieben:So, also muss ich mich Desktop-mäßig wohl von Debian varabschieden und Ubuntu installieren, wie toll.
Wenn du so schnell aufgibst, dann wäre Ubuntu vermutlich tatsächlich die bessere Wahl.
Das hat gesessen. Du hast aber recht. Und letztendlich hat mich das motiviert und dazu bewogen alles nochmal zu installieren, den Kernel aus den Backports zu holen und das von Dir angesprochene Paket zu installieren und siehe da, jetzt funktioniert es. Vielen Dank, besonders Dir hikaru, für die Hilfe.

Antworten