klappt das leider nicht. Das heißt, es wird die Auflösung geändert, aber ich habe anschließend Bereiche die liegen ausserhalb meines Bildschirms und die Schriftgröße vergrößert sich in jedem der Fälle.<menu id="res-menu" label="Resolution">
<separator label="Resolution"/>
<item label="1280x1024">
<action name="Execute">
<execute>
xrandr -s 1280x1024
</execute>
</action>
</item>
<item label="1024x768">
<action name="Execute">
<execute>
xrandr -s 1024x768
</execute>
</action>
</item>
<item label="800x600">
<action name="Execute">
<execute>
xrandr -s 800x600
</execute>
</action>
</item>
xrandr wirft mir aus:
Das hier:Screen 0: minimum 8 x 8, current 1400 x 1050, maximum 32767 x 32767
LVDS1 connected primary 1400x1050+0+0 (normal left inverted right x axis y axis) 290mm x 210mm
1400x1050 60.02*+ 50.00
1280x1024 60.02
1280x960 60.00
1360x768 59.80 59.96
1152x864 60.00
1024x768 60.00
800x600 60.32 56.25
704x525 60.00
640x480 59.94
DVI1 disconnected (normal left inverted right x axis y axis)
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
brachte keine Veränderung.sudo mkdir -p /etc/X11/xorg.conf.d
sudo tee /etc/X11/xorg.conf.d/00-resolution.conf <<!
Section "Screen"
Identifier "Screen0"
Monitor "LVDS1"
DefaultDepth 24
SubSection "Display"
Modes "1280x960"
EndSubSection
EndSection
Bei mir gibt es keine xorg.conf. Muß ich dafür eine anlegen und wenn ja - wie?