Mein System ist ein aktuelles Buster mit KDE, eingebaut ist eine Lowcostkarte, die Technisat Skystar2. Es steht eine SAT-Anlage mit Quad-LNB zur Verfügung, ich möchte über Astra 19.2 Ost die deutschsprachigen Sender empfangen und mit VLC wiedergeben.
Code: Alles auswählen
$ uname -a
Linux pc 4.19.0-16-amd64 #1 SMP Debian 4.19.181-1 (2021-03-19) x86_64 GNU/Linux
Code: Alles auswählen
$ lspci
03:07.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)
Code: Alles auswählen
$ ls /dev/dvb/adapter0/
demux0 dvr0 frontend0 net0
Code: Alles auswählen
$ sudo dmesg | grep DVB
[ 7.040387] dvbdev: DVB: registering new adapter (FlexCop Digital TV device)
[ 7.449135] cx24120: Conexant cx24120/cx24118 - DVBS/S2 Satellite demod/tuner
[ 7.453778] b2c2_flexcop_pci 0000:03:07.0: DVB: registering adapter 0 frontend 0 (Conexant CX24120/CX24118)...
[ 7.453850] b2c2-flexcop: initialization of 'Sky2PC/SkyStar S2 DVB-S/S2 rev 3.3' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Code: Alles auswählen
$ sudo dmesg | grep -i b2c2
[ 6.998881] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
[ 7.042035] b2c2-flexcop: MAC address = 00:08:c9:e1:a0:4c
[ 7.453770] b2c2-flexcop: ISL6421 successfully attached.
[ 7.453773] b2c2-flexcop: found 'Conexant CX24120/CX24118' .
[ 7.453778] b2c2_flexcop_pci 0000:03:07.0: DVB: registering adapter 0 frontend 0 (Conexant CX24120/CX24118)...
[ 7.453850] b2c2-flexcop: initialization of 'Sky2PC/SkyStar S2 DVB-S/S2 rev 3.3' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[ 812.345191] b2c2_flexcop_pci 0000:03:07.0: firmware: direct-loading firmware dvb-fe-cx24120-1.20.58.2.fw
Code: Alles auswählen
w_scan -fs -s S19E2 -M
w_scan version 20170107 (compiled for DVB API 5.10)
using settings for 19.2 east Astra 1KR/1L/1N/1M
scan type SATELLITE, channellist 68
output format gstreamer
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> SATELLITE "Conexant CX24120/CX24118": very good :-))
Using SATELLITE frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.11
frontend 'Conexant CX24120/CX24118' supports
INVERSION_AUTO
DVB-S
DVB-S2
FREQ (0.95GHz ... 2.15GHz)
SRATE (1.000MSym/s ... 45.000MSym/s)
using LNB "UNIVERSAL"
Code: Alles auswählen
/*******************************************************************************
* devices
******************************************************************************/
Device0 dvb:a0f0: Conexant CX24120/CX24118
/*******************************************************************************
* Scan Type
******************************************************************************/
DVB-S/S2
satellite = 19.2 east Astra 1KR/1L/1M/1N
/*******************************************************************************
* lnb
******************************************************************************/
Setup.LnbFrequLo = 9750
Setup.LnbFrequHi = 10600
Setup.LnbSLOF = 11700
11:04:13 wirbelscan version 2021.03.07 @ VDR 2.5.1
11:04:13 using settings for 19.2 east Astra 1KR/1L/1M/1N
11:04:13 testing '???:10714:HC2M5O35P0S1:S19.2E:27500:0:0:0:0:8192:0:0:0'
11:04:13 device 0 = Conexant CX24120/CX24118
11:04:13 very good :-))
11:04:13 frontend Conexant CX24120/CX24118
11:04:13 ???:10714:HC23M5O35P0S1:S19.2E:22000:0:0:0:0:0:0:0:0
11:04:17 ???:10729:VC23M5O35P0S1:S19.2E:22000:0:0:0:0:0:0:0:0
11:04:19 tuning to S2 10729.00 MHz SR 22000 VC23M5O35P0S1
11:04:20 lock.
11:04:20 ScannedTransponders.Add(181): 'S2 10729.00 MHz SR 22000 VC23M5O35P0S1'
11:04:20 searching 13 services
Hat jemand eine Idee an welchen Schrauben ich noch drehen könnte bzw. in welche Richtung ich weiterexperimentieren kann?
Danke im Voraus
Dietmar