ich habe Probleme mit dem WLAN-Treiber für folgende Karte:
Code: Alles auswählen
#lspci -nnk | grep -i net -A2
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Subsystem: Acer Incorporated [ALI] RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1025:0987]
Kernel driver in use: r8169
Kernel modules: r8169
03:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter [168c:0042] (rev 30)
Subsystem: Lite-On Communications Inc QCA9377 802.11ac Wireless Network Adapter [11ad:0806]
Kernel driver in use: ath10k_pci
Kernel modules: ath10k_pci
Code: Alles auswählen
# ifconfig -a
enp2s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.178.56 netmask 255.255.255.0 broadcast 192.168.178.255
inet6 fe80::2e60:cff:fe93:9a2f prefixlen 64 scopeid 0x20<link>
ether 2c:60:0c:93:9a:2f txqueuelen 1000 (Ethernet)
RX packets 45388 bytes 60610626 (57.8 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 28221 bytes 2251818 (2.1 MiB)
TX errors 4 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Lokale Schleife)
RX packets 332 bytes 26248 (25.6 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 332 bytes 26248 (25.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Code: Alles auswählen
[ 7.218827] ath10k_pci 0000:03:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:03:00.0.bin (-2)
[ 7.218829] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:03:00.0.bin failed with error -2
[ 7.218838] ath10k_pci 0000:03:00.0: firmware: failed to load ath10k/cal-pci-0000:03:00.0.bin (-2)
[ 7.218839] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2
[ 7.218845] ath10k_pci 0000:03:00.0: firmware: failed to load ath10k/QCA9377/hw1.0/firmware-5.bin (-2)
[ 7.218847] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-5.bin failed with error -2
[ 7.218849] ath10k_pci 0000:03:00.0: could not fetch firmware file 'ath10k/QCA9377/hw1.0/firmware-5.bin': -2
[ 7.218855] ath10k_pci 0000:03:00.0: firmware: failed to load ath10k/QCA9377/hw1.0/firmware-4.bin (-2)
[ 7.218856] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-4.bin failed with error -2
[ 7.218857] ath10k_pci 0000:03:00.0: could not fetch firmware file 'ath10k/QCA9377/hw1.0/firmware-4.bin': -2
[ 7.218863] ath10k_pci 0000:03:00.0: firmware: failed to load ath10k/QCA9377/hw1.0/firmware-3.bin (-2)
[ 7.218864] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-3.bin failed with error -2
[ 7.218866] ath10k_pci 0000:03:00.0: could not fetch firmware file 'ath10k/QCA9377/hw1.0/firmware-3.bin': -2
[ 7.218872] ath10k_pci 0000:03:00.0: firmware: failed to load ath10k/QCA9377/hw1.0/firmware-2.bin (-2)
[ 7.218873] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-2.bin failed with error -2
[ 7.218874] ath10k_pci 0000:03:00.0: could not fetch firmware file 'ath10k/QCA9377/hw1.0/firmware-2.bin': -2
[ 7.218875] ath10k_pci 0000:03:00.0: could not fetch firmware files (-2)
[ 7.218876] ath10k_pci 0000:03:00.0: could not probe fw (-2)
Vielen Dank & Beste Grüße,
Frink