keine Linux-spezifische Frage, aber vielleicht kann mir hier ja trotzdem jemand weiterhelfen.
Folgendes Problem mit meinem treuen X220:
- Der Akku wird nicht geladen. Nach dem Einstecken des Netzteils blinkt die Lade-LED drei Mal und bleibt danach dunkel.
- Ohne angeschlossenes Netzteil lässt sich das Gerät nicht einschalten.
- Wenn man das Netzteil im Betrieb abzieht, geht das Gerät sofort aus.
Ausgabe von tlp-stat bei Netzteilbetrieb:
Code: Alles auswählen
--- TLP 0.9 --------------------------------------------
+++ ThinkPad Extended Battery Functions
tp-smapi = active
tpacpi-bat = active
+++ ThinkPad Battery Status: BAT0 (Main / Internal)
/sys/devices/platform/smapi/BAT0/manufacturer = SANYO
/sys/devices/platform/smapi/BAT0/model = 45N1175
/sys/devices/platform/smapi/BAT0/manufacture_date = 2013-08-16
/sys/devices/platform/smapi/BAT0/first_use_date = 2014-12-11
/sys/devices/platform/smapi/BAT0/cycle_count = 293
/sys/devices/platform/smapi/BAT0/design_capacity = 93960 [mWh]
/sys/devices/platform/smapi/BAT0/last_full_capacity = 93420 [mWh]
/sys/devices/platform/smapi/BAT0/remaining_capacity = 63450 [mWh]
/sys/devices/platform/smapi/BAT0/remaining_percent = 68 [%]
/sys/devices/platform/smapi/BAT0/remaining_running_time_now = not_discharging [min]
/sys/devices/platform/smapi/BAT0/remaining_charging_time = not_charging [min]
/sys/devices/platform/smapi/BAT0/power_now = 0 [mW]
/sys/devices/platform/smapi/BAT0/power_avg = 0 [mW]
/sys/devices/platform/smapi/BAT0/state = idle
tpacpi-bat.BAT0.startThreshold = 96 [%]
tpacpi-bat.BAT0.stopThreshold = 100 [%]
tpacpi-bat.BAT0.forceDischarge = 0
Charge = 67.9 [%]
Capacity = 99.4 [%]
Wenn ich tlp-stat recalibrate ausführe, schaltet sich das Gerät augenblicklich aus.
Akku raus und liegen lassen hat nichts gebracht. Aus Verzweiflung habe ich schon die Einstellungen im BIOS zurückgesetzt. (Caveat: ich nutze UEFI und durfte anschließend Grub reparieren, da GRUB nicht mehr startete.)
Wie kann ich herausfinden, ob das Problem noch mit einem neuen Akku oder nur mit einem neuen Laptop gelöst werden kann?
Gruß
Jan