WLAN-Verbindung bricht sofort ab
WLAN-Verbindung bricht sofort ab
Guten Tag liebe debianforum.de Gemeinde, ich habe ein sehr eigenartiges Problem undzwar hab ich mein Laptop gestern mit zu meinem Nebenjob genommen (da ich für mein Chef ein Kassenbuch mit LibreOffice Calc machen sollte) und dort versuchte ich mich dann mit dem WLAN-AP zu verbinden aber nachdem ich das Netzwerk mit welchem ich mich verbinden wollte angeklickt hatte, dauerte es einige Sekunden und im Anschluss bekam ich die Meldung das die Verbindung zum Netzwerk getrennt (abgebrochen) sei. Ohne das ich jemals wirklich mit dem WLAN-AP verbunden war. Ich habs dann nochmal mit anderen WLAN-APs dort ausprobiert, mit dem selben Resultat. Sprich das man nachdem man den Access Point angeklickt hatte mit dem man sich doch gerne verbinden würde, er direkt nach wirklich sehr kurzem probieren die Meldung zurück gibt das er die Verbindung wieder getrennt habe. Komischerweise ist es ja wie gesagt bei allen WLAN-Netzwerken dort bei meinem Nebenjob so. Aber im Allgemeinen funktioniert es ja, da ich ja dieses Thema auch gerade von dem besagten Rechner aber halt von daheim aus übers WLAN erstelle und dort funktioniert alles reibungslos.
-
BenutzerGa4gooPh
Re: WLAN-Verbindung bricht sofort ab
Da die Glaskugel defekt ist - und ich auf Authentifizierungsfehler tippe:
Vor Verbindungsversuch Terminal aufrufen und
dann Verbindungsversuch z. B. per Networkmanager und Ausgabe in Codetags posten!
Davor oder danach:
Ausgaben in Codetags posten!
Vor Verbindungsversuch Terminal aufrufen und
Code: Alles auswählen
su -
journalctl -fDavor oder danach:
Code: Alles auswählen
su -
iw list
iw dev wlan0 scan -> Schnittstelle anpassen!
Gut möglich, dass in der Firma eine Authentifizierung 802.1X Enterprise mit RADIUS erfolgt, evtl. sogar mit Zertifikaten. Mal Sysadmin gefragt? WLAN-Preshared-Key brauchst du zumindest.Komischerweise ist es ja wie gesagt bei allen WLAN-Netzwerken dort bei meinem Nebenjob so. Aber im Allgemeinen funktioniert es ja, da ich ja dieses Thema auch gerade von dem besagten Rechner aber halt von daheim aus übers WLAN erstelle und dort funktioniert alles reibungslos.
Re: WLAN-Verbindung bricht sofort ab
Danke für den Versuch mir zu helfen. So habe nun die von dir geforderterten Kommandos laufen lassen und die Ausgaben kopiert.
journalctl -f, ergab:
iw list, ergab:
Fortsetzung folgt im nächsten Post, da der Inhalt leider für einen Post zu groß war.
journalctl -f, ergab:
Code: Alles auswählen
-- Logs begin at Mon 2017-07-24 17:25:49 CEST. --
Jul 24 17:31:48 daniel laptop_mode[6493]: enabled, not active [unchanged]
Jul 24 17:31:48 daniel systemd[1]: Reloaded Laptop Mode Tools.
Jul 24 17:32:53 daniel su[6553]: pam_unix(su:auth): authentication failure; logname= uid=1000 euid=0 tty=/dev/pts/0 ruser=daniel rhost= user=root
Jul 24 17:32:55 daniel su[6553]: pam_authenticate: Authentication failure
Jul 24 17:32:55 daniel su[6553]: FAILED su for root by daniel
Jul 24 17:32:55 daniel su[6553]: - /dev/pts/0 daniel:root
Jul 24 17:33:06 daniel su[6555]: Successful su for root by daniel
Jul 24 17:33:06 daniel su[6555]: + /dev/pts/0 daniel:root
Jul 24 17:33:06 daniel su[6555]: pam_unix(su:session): session opened for user root by (uid=1000)
Jul 24 17:33:06 daniel su[6555]: pam_systemd(su:session): Cannot create session: Already running in a session
Jul 24 17:34:06 daniel NetworkManager[4580]: <info> [1500910446.9163] device (wlp3s0): disconnecting for new activation request.
Jul 24 17:34:06 daniel NetworkManager[4580]: <info> [1500910446.9163] device (wlp3s0): state change: activated -> deactivating (reason 'new-activation') [100 110 60]
Jul 24 17:34:06 daniel NetworkManager[4580]: <info> [1500910446.9167] manager: NetworkManager state is now DISCONNECTING
Jul 24 17:34:06 daniel dbus[4579]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
Jul 24 17:34:06 daniel systemd[1]: Starting Network Manager Script Dispatcher Service...
Jul 24 17:34:06 daniel dbus[4579]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jul 24 17:34:06 daniel systemd[1]: Started Network Manager Script Dispatcher Service.
Jul 24 17:34:06 daniel nm-dispatcher[6576]: req:1 'connectivity-change': new request (1 scripts)
Jul 24 17:34:06 daniel nm-dispatcher[6576]: req:1 'connectivity-change': start running ordered scripts...
Jul 24 17:34:06 daniel NetworkManager[4580]: <info> [1500910446.9643] audit: op="connection-activate" uuid="959b51b3-c103-4344-bf27-c665dfe1ad9a" name="Almond+ 2.4GHz" pid=5839 uid=1000 result="success"
Jul 24 17:34:06 daniel NetworkManager[4580]: <info> [1500910446.9648] device (wlp3s0): state change: deactivating -> disconnected (reason 'new-activation') [110 30 60]
Jul 24 17:34:06 daniel avahi-daemon[4584]: Withdrawing address record for 2003:c1:2bce:9361:aa7e:f79d:cad2:b44d on wlp3s0.
Jul 24 17:34:06 daniel avahi-daemon[4584]: Leaving mDNS multicast group on interface wlp3s0.IPv6 with address 2003:c1:2bce:9361:aa7e:f79d:cad2:b44d.
Jul 24 17:34:06 daniel avahi-daemon[4584]: Joining mDNS multicast group on interface wlp3s0.IPv6 with address fe80::1513:ef38:270d:3b28.
Jul 24 17:34:06 daniel avahi-daemon[4584]: Registering new address record for fe80::1513:ef38:270d:3b28 on wlp3s0.*.
Jul 24 17:34:06 daniel avahi-daemon[4584]: Withdrawing address record for fe80::1513:ef38:270d:3b28 on wlp3s0.
Jul 24 17:34:06 daniel avahi-daemon[4584]: Leaving mDNS multicast group on interface wlp3s0.IPv6 with address fe80::1513:ef38:270d:3b28.
Jul 24 17:34:06 daniel avahi-daemon[4584]: Interface wlp3s0.IPv6 no longer relevant for mDNS.
Jul 24 17:34:06 daniel NetworkManager[4580]: <info> [1500910446.9974] dhcp4 (wlp3s0): canceled DHCP transaction, DHCP client pid 6261
Jul 24 17:34:06 daniel NetworkManager[4580]: <info> [1500910446.9974] dhcp4 (wlp3s0): state changed bound -> done
Jul 24 17:34:06 daniel NetworkManager[4580]: <info> [1500910446.9978] dhcp6 (wlp3s0): canceled DHCP transaction
Jul 24 17:34:07 daniel kernel: wlp3s0: deauthenticating from 94:4a:0c:cc:34:53 by local choice (Reason: 3=DEAUTH_LEAVING)
Jul 24 17:34:07 daniel wpa_supplicant[5214]: wlp3s0: CTRL-EVENT-DISCONNECTED bssid=94:4a:0c:cc:34:53 reason=3 locally_generated=1
Jul 24 17:34:07 daniel avahi-daemon[4584]: Withdrawing address record for 192.168.2.104 on wlp3s0.
Jul 24 17:34:07 daniel avahi-daemon[4584]: Leaving mDNS multicast group on interface wlp3s0.IPv4 with address 192.168.2.104.
Jul 24 17:34:07 daniel avahi-daemon[4584]: Interface wlp3s0.IPv4 no longer relevant for mDNS.
Jul 24 17:34:07 daniel NetworkManager[4580]: <info> [1500910447.0304] device (wlp3s0): set-hw-addr: set MAC address to FA:1C:9E:04:BB:C8 (scanning)
Jul 24 17:34:07 daniel kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
Jul 24 17:34:07 daniel kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
Jul 24 17:34:07 daniel kernel: iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
Jul 24 17:34:07 daniel kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
Jul 24 17:34:07 daniel kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
Jul 24 17:34:07 daniel kernel: iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
Jul 24 17:34:07 daniel kernel: IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Jul 24 17:34:07 daniel NetworkManager[4580]: <info> [1500910447.4152] manager: NetworkManager state is now DISCONNECTED
Jul 24 17:34:07 daniel NetworkManager[4580]: <info> [1500910447.4159] device (wlp3s0): Activation: starting connection 'Almond+ 2.4GHz' (959b51b3-c103-4344-bf27-c665dfe1ad9a)
Jul 24 17:34:07 daniel NetworkManager[4580]: <warn> [1500910447.4181] sup-iface[0x560b324293e0,wlp3s0]: connection disconnected (reason -3)
Jul 24 17:34:07 daniel NetworkManager[4580]: <info> [1500910447.4184] device (wlp3s0): supplicant interface state: completed -> disconnected
Jul 24 17:34:07 daniel nm-dispatcher[6576]: req:2 'down' [wlp3s0]: new request (1 scripts)
Jul 24 17:34:07 daniel NetworkManager[4580]: <info> [1500910447.4189] device (wlp3s0): supplicant interface state: disconnected -> disabled
Jul 24 17:34:07 daniel nm-dispatcher[6576]: req:2 'down' [wlp3s0]: start running ordered scripts...
Jul 24 17:34:07 daniel NetworkManager[4580]: <info> [1500910447.4237] device (wlp3s0): state change: disconnected -> prepare (reason 'none') [30 40 0]
Jul 24 17:34:07 daniel NetworkManager[4580]: <info> [1500910447.4241] manager: NetworkManager state is now CONNECTING
Jul 24 17:34:07 daniel NetworkManager[4580]: <info> [1500910447.4306] device (wlp3s0): set-hw-addr: reset MAC address to 08:11:96:92:04:A8 (preserve)
Jul 24 17:34:07 daniel kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
Jul 24 17:34:07 daniel kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
Jul 24 17:34:07 daniel kernel: iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
Jul 24 17:34:07 daniel kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
Jul 24 17:34:07 daniel kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
Jul 24 17:34:07 daniel kernel: iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
Jul 24 17:34:07 daniel kernel: IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Jul 24 17:34:07 daniel NetworkManager[4580]: <info> [1500910447.7997] device (wlp3s0): state change: prepare -> config (reason 'none') [40 50 0]
Jul 24 17:34:07 daniel NetworkManager[4580]: <info> [1500910447.8003] device (wlp3s0): Activation: (wifi) access point 'Almond+ 2.4GHz' has security, but secrets are required.
Jul 24 17:34:07 daniel NetworkManager[4580]: <info> [1500910447.8004] device (wlp3s0): state change: config -> need-auth (reason 'none') [50 60 0]
Jul 24 17:34:07 daniel NetworkManager[4580]: <warn> [1500910447.8126] device (wlp3s0): No agents were available for this request.
Jul 24 17:34:07 daniel NetworkManager[4580]: <info> [1500910447.8127] device (wlp3s0): state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Jul 24 17:34:07 daniel NetworkManager[4580]: <info> [1500910447.8130] manager: NetworkManager state is now DISCONNECTED
Jul 24 17:34:07 daniel NetworkManager[4580]: <warn> [1500910447.8136] device (wlp3s0): Activation: failed for connection 'Almond+ 2.4GHz'
Jul 24 17:34:07 daniel NetworkManager[4580]: <info> [1500910447.8145] device (wlp3s0): state change: failed -> disconnected (reason 'none') [120 30 0]
Jul 24 17:34:07 daniel kernel: IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Jul 24 17:34:08 daniel NetworkManager[4580]: <info> [1500910448.3597] device (wlp3s0): set-hw-addr: set MAC address to AA:93:31:D7:04:10 (scanning)
Jul 24 17:34:08 daniel kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
Jul 24 17:34:08 daniel kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
Jul 24 17:34:08 daniel kernel: iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
Jul 24 17:34:08 daniel kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
Jul 24 17:34:08 daniel kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
Jul 24 17:34:08 daniel kernel: iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
Jul 24 17:34:08 daniel kernel: IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Jul 24 17:34:08 daniel NetworkManager[4580]: <info> [1500910448.7483] policy: auto-activating connection 'WLAN-749230'
Jul 24 17:34:08 daniel NetworkManager[4580]: <info> [1500910448.7515] device (wlp3s0): Activation: starting connection 'WLAN-749230' (e66edb6a-f421-4c49-9589-2d3f9ade69bc)
Jul 24 17:34:08 daniel NetworkManager[4580]: <info> [1500910448.7522] device (wlp3s0): state change: disconnected -> prepare (reason 'none') [30 40 0]
Jul 24 17:34:08 daniel NetworkManager[4580]: <info> [1500910448.7525] manager: NetworkManager state is now CONNECTING
Jul 24 17:34:08 daniel NetworkManager[4580]: <info> [1500910448.7586] device (wlp3s0): set-hw-addr: reset MAC address to 08:11:96:92:04:A8 (preserve)
Jul 24 17:34:08 daniel kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
Jul 24 17:34:08 daniel kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
Jul 24 17:34:08 daniel kernel: iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
Jul 24 17:34:09 daniel kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
Jul 24 17:34:09 daniel kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
Jul 24 17:34:09 daniel kernel: iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
Jul 24 17:34:09 daniel kernel: IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Jul 24 17:34:09 daniel NetworkManager[4580]: <info> [1500910449.1285] device (wlp3s0): state change: prepare -> config (reason 'none') [40 50 0]
Jul 24 17:34:09 daniel NetworkManager[4580]: <info> [1500910449.1292] device (wlp3s0): Activation: (wifi) access point 'WLAN-749230' has security, but secrets are required.
Jul 24 17:34:09 daniel NetworkManager[4580]: <info> [1500910449.1293] device (wlp3s0): state change: config -> need-auth (reason 'none') [50 60 0]
Jul 24 17:34:09 daniel NetworkManager[4580]: <info> [1500910449.1334] device (wlp3s0): supplicant interface state: disabled -> disconnected
Jul 24 17:34:09 daniel NetworkManager[4580]: <info> [1500910449.1402] device (wlp3s0): state change: need-auth -> prepare (reason 'none') [60 40 0]
Jul 24 17:34:09 daniel NetworkManager[4580]: <info> [1500910449.1407] device (wlp3s0): state change: prepare -> config (reason 'none') [40 50 0]
Jul 24 17:34:09 daniel NetworkManager[4580]: <info> [1500910449.1411] device (wlp3s0): Activation: (wifi) connection 'WLAN-749230' has security, and secrets exist. No new secrets needed.
Jul 24 17:34:09 daniel NetworkManager[4580]: <info> [1500910449.1411] Config: added 'ssid' value 'WLAN-749230'
Jul 24 17:34:09 daniel NetworkManager[4580]: <info> [1500910449.1412] Config: added 'scan_ssid' value '1'
Jul 24 17:34:09 daniel NetworkManager[4580]: <info> [1500910449.1412] Config: added 'key_mgmt' value 'WPA-PSK'
Jul 24 17:34:09 daniel NetworkManager[4580]: <info> [1500910449.1412] Config: added 'auth_alg' value 'OPEN'
Jul 24 17:34:09 daniel NetworkManager[4580]: <info> [1500910449.1412] Config: added 'psk' value '<hidden>'
Jul 24 17:34:09 daniel NetworkManager[4580]: <info> [1500910449.1606] device (wlp3s0): supplicant interface state: disconnected -> scanning
Jul 24 17:34:12 daniel wpa_supplicant[5214]: wlp3s0: SME: Trying to authenticate with 94:4a:0c:cc:34:53 (SSID='WLAN-749230' freq=2462 MHz)
Jul 24 17:34:12 daniel kernel: wlp3s0: authenticate with 94:4a:0c:cc:34:53
Jul 24 17:34:12 daniel NetworkManager[4580]: <info> [1500910452.4390] device (wlp3s0): supplicant interface state: scanning -> authenticating
Jul 24 17:34:12 daniel kernel: wlp3s0: send auth to 94:4a:0c:cc:34:53 (try 1/3)
Jul 24 17:34:12 daniel kernel: wlp3s0: authenticated
Jul 24 17:34:17 daniel kernel: wlp3s0: aborting authentication with 94:4a:0c:cc:34:53 by local choice (Reason: 3=DEAUTH_LEAVING)
Jul 24 17:34:17 daniel NetworkManager[4580]: <info> [1500910457.4476] device (wlp3s0): supplicant interface state: authenticating -> disconnected
Jul 24 17:34:17 daniel NetworkManager[4580]: <info> [1500910457.5480] device (wlp3s0): supplicant interface state: disconnected -> scanning
Jul 24 17:34:20 daniel wpa_supplicant[5214]: wlp3s0: SME: Trying to authenticate with 94:4a:0c:cc:34:53 (SSID='WLAN-749230' freq=2462 MHz)
Jul 24 17:34:20 daniel kernel: wlp3s0: authenticate with 94:4a:0c:cc:34:53
Jul 24 17:34:20 daniel kernel: wlp3s0: send auth to 94:4a:0c:cc:34:53 (try 1/3)
Jul 24 17:34:20 daniel kernel: wlp3s0: authenticated
Jul 24 17:34:20 daniel NetworkManager[4580]: <info> [1500910460.8122] device (wlp3s0): supplicant interface state: scanning -> authenticating
Jul 24 17:34:25 daniel wpa_supplicant[5214]: wlp3s0: SME: Deauth request to the driver failed
Jul 24 17:34:25 daniel NetworkManager[4580]: <info> [1500910465.8182] device (wlp3s0): supplicant interface state: authenticating -> disconnected
Jul 24 17:34:26 daniel NetworkManager[4580]: <info> [1500910466.3185] device (wlp3s0): supplicant interface state: disconnected -> scanning
Jul 24 17:34:29 daniel wpa_supplicant[5214]: wlp3s0: SME: Trying to authenticate with 94:4a:0c:cc:34:53 (SSID='WLAN-749230' freq=2462 MHz)
Jul 24 17:34:29 daniel kernel: wlp3s0: authenticate with 94:4a:0c:cc:34:53
Jul 24 17:34:29 daniel kernel: wlp3s0: send auth to 94:4a:0c:cc:34:53 (try 1/3)
Jul 24 17:34:29 daniel NetworkManager[4580]: <info> [1500910469.6581] device (wlp3s0): supplicant interface state: scanning -> authenticating
Jul 24 17:34:29 daniel kernel: wlp3s0: authenticated
Jul 24 17:34:34 daniel NetworkManager[4580]: <warn> [1500910474.0940] device (wlp3s0): Activation: (wifi) association took too long, failing activation
Jul 24 17:34:34 daniel NetworkManager[4580]: <info> [1500910474.0941] device (wlp3s0): state change: config -> failed (reason 'ssid-not-found') [50 120 53]
Jul 24 17:34:34 daniel NetworkManager[4580]: <info> [1500910474.0946] manager: NetworkManager state is now DISCONNECTED
Jul 24 17:34:34 daniel wpa_supplicant[5214]: wlp3s0: CTRL-EVENT-DISCONNECTED bssid=94:4a:0c:cc:34:53 reason=3 locally_generated=1
Jul 24 17:34:34 daniel NetworkManager[4580]: <warn> [1500910474.0964] device (wlp3s0): Activation: failed for connection 'WLAN-749230'
Jul 24 17:34:34 daniel NetworkManager[4580]: <warn> [1500910474.0971] sup-iface[0x560b324293e0,wlp3s0]: connection disconnected (reason -3)
Jul 24 17:34:34 daniel NetworkManager[4580]: <info> [1500910474.0981] device (wlp3s0): state change: failed -> disconnected (reason 'none') [120 30 0]
Jul 24 17:34:34 daniel kernel: IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Jul 24 17:34:34 daniel NetworkManager[4580]: <info> [1500910474.1051] device (wlp3s0): set-hw-addr: set MAC address to 96:45:C6:3C:85:33 (scanning)
Jul 24 17:34:34 daniel kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
Jul 24 17:34:34 daniel kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
Jul 24 17:34:34 daniel kernel: iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
Jul 24 17:34:34 daniel kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
Jul 24 17:34:34 daniel kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
Jul 24 17:34:34 daniel kernel: iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
Jul 24 17:34:34 daniel kernel: IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Jul 24 17:34:34 daniel NetworkManager[4580]: <info> [1500910474.4807] device (wlp3s0): supplicant interface state: authenticating -> disconnected
Jul 24 17:34:34 daniel NetworkManager[4580]: <info> [1500910474.4855] device (wlp3s0): supplicant interface state: disconnected -> disabled
Jul 24 17:34:34 daniel NetworkManager[4580]: <info> [1500910474.5140] device (wlp3s0): supplicant interface state: disabled -> disconnected
Jul 24 17:34:37 daniel NetworkManager[4580]: <info> [1500910477.7499] policy: auto-activating connection 'WLAN-749230'
Jul 24 17:34:37 daniel NetworkManager[4580]: <info> [1500910477.7523] device (wlp3s0): Activation: starting connection 'WLAN-749230' (e66edb6a-f421-4c49-9589-2d3f9ade69bc)
Jul 24 17:34:37 daniel NetworkManager[4580]: <info> [1500910477.7528] device (wlp3s0): state change: disconnected -> prepare (reason 'none') [30 40 0]
Jul 24 17:34:37 daniel NetworkManager[4580]: <info> [1500910477.7531] manager: NetworkManager state is now CONNECTING
Jul 24 17:34:37 daniel NetworkManager[4580]: <info> [1500910477.7586] device (wlp3s0): set-hw-addr: reset MAC address to 08:11:96:92:04:A8 (preserve)
Jul 24 17:34:37 daniel kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
Jul 24 17:34:37 daniel kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
Jul 24 17:34:37 daniel kernel: iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
Jul 24 17:34:38 daniel kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
Jul 24 17:34:38 daniel kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
Jul 24 17:34:38 daniel kernel: iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
Jul 24 17:34:38 daniel kernel: IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Jul 24 17:34:38 daniel NetworkManager[4580]: <info> [1500910478.1324] device (wlp3s0): supplicant interface state: disconnected -> disabled
Jul 24 17:34:38 daniel NetworkManager[4580]: <info> [1500910478.1330] device (wlp3s0): state change: prepare -> config (reason 'none') [40 50 0]
Jul 24 17:34:38 daniel NetworkManager[4580]: <info> [1500910478.1335] device (wlp3s0): Activation: (wifi) access point 'WLAN-749230' has security, but secrets are required.
Jul 24 17:34:38 daniel NetworkManager[4580]: <info> [1500910478.1336] device (wlp3s0): state change: config -> need-auth (reason 'none') [50 60 0]
Jul 24 17:34:38 daniel NetworkManager[4580]: <info> [1500910478.1437] device (wlp3s0): state change: need-auth -> prepare (reason 'none') [60 40 0]
Jul 24 17:34:38 daniel NetworkManager[4580]: <info> [1500910478.1443] device (wlp3s0): state change: prepare -> config (reason 'none') [40 50 0]
Jul 24 17:34:38 daniel NetworkManager[4580]: <info> [1500910478.1445] device (wlp3s0): Activation: (wifi) connection 'WLAN-749230' has security, and secrets exist. No new secrets needed.
Jul 24 17:34:38 daniel NetworkManager[4580]: <info> [1500910478.1445] Config: added 'ssid' value 'WLAN-749230'
Jul 24 17:34:38 daniel NetworkManager[4580]: <info> [1500910478.1446] Config: added 'scan_ssid' value '1'
Jul 24 17:34:38 daniel NetworkManager[4580]: <info> [1500910478.1446] Config: added 'key_mgmt' value 'WPA-PSK'
Jul 24 17:34:38 daniel NetworkManager[4580]: <info> [1500910478.1446] Config: added 'auth_alg' value 'OPEN'
Jul 24 17:34:38 daniel NetworkManager[4580]: <info> [1500910478.1446] Config: added 'psk' value '<hidden>'
Jul 24 17:34:38 daniel NetworkManager[4580]: <info> [1500910478.1775] device (wlp3s0): supplicant interface state: disabled -> disconnected
Jul 24 17:34:38 daniel wpa_supplicant[5214]: wlp3s0: SME: Trying to authenticate with 94:4a:0c:cc:34:53 (SSID='WLAN-749230' freq=2462 MHz)
Jul 24 17:34:38 daniel kernel: wlp3s0: authenticate with 94:4a:0c:cc:34:53
Jul 24 17:34:38 daniel kernel: wlp3s0: send auth to 94:4a:0c:cc:34:53 (try 1/3)
Jul 24 17:34:38 daniel NetworkManager[4580]: <info> [1500910478.1953] device (wlp3s0): supplicant interface state: disconnected -> authenticating
Jul 24 17:34:38 daniel kernel: wlp3s0: send auth to 94:4a:0c:cc:34:53 (try 2/3)
Jul 24 17:34:38 daniel wpa_supplicant[5214]: wlp3s0: Trying to associate with 94:4a:0c:cc:34:53 (SSID='WLAN-749230' freq=2462 MHz)
Jul 24 17:34:38 daniel kernel: wlp3s0: authenticated
Jul 24 17:34:38 daniel kernel: wlp3s0: associate with 94:4a:0c:cc:34:53 (try 1/3)
Jul 24 17:34:38 daniel NetworkManager[4580]: <info> [1500910478.2514] device (wlp3s0): supplicant interface state: authenticating -> associating
Jul 24 17:34:38 daniel kernel: wlp3s0: associate with 94:4a:0c:cc:34:53 (try 2/3)
Jul 24 17:34:38 daniel kernel: wlp3s0: RX AssocResp from 94:4a:0c:cc:34:53 (capab=0x1411 status=0 aid=1)
Jul 24 17:34:38 daniel wpa_supplicant[5214]: wlp3s0: Associated with 94:4a:0c:cc:34:53
Jul 24 17:34:38 daniel kernel: wlp3s0: associated
Jul 24 17:34:38 daniel kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Jul 24 17:34:38 daniel NetworkManager[4580]: <info> [1500910478.4007] device (wlp3s0): supplicant interface state: associating -> associated
Jul 24 17:34:38 daniel wpa_supplicant[5214]: wlp3s0: CTRL-EVENT-REGDOM-CHANGE init=COUNTRY_IE type=COUNTRY alpha2=DE
Jul 24 17:34:38 daniel kernel: wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:4a:0c:cc:34:53
Jul 24 17:34:38 daniel NetworkManager[4580]: <info> [1500910478.4414] device (wlp3s0): supplicant interface state: associated -> 4-way handshake
Jul 24 17:34:38 daniel wpa_supplicant[5214]: wlp3s0: WPA: Key negotiation completed with 94:4a:0c:cc:34:53 [PTK=CCMP GTK=CCMP]
Jul 24 17:34:38 daniel wpa_supplicant[5214]: wlp3s0: CTRL-EVENT-CONNECTED - Connection to 94:4a:0c:cc:34:53 completed [id=0 id_str=]
Jul 24 17:34:38 daniel NetworkManager[4580]: <info> [1500910478.5310] device (wlp3s0): supplicant interface state: 4-way handshake -> completed
Jul 24 17:34:38 daniel NetworkManager[4580]: <info> [1500910478.5311] device (wlp3s0): Activation: (wifi) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'WLAN-749230'.
Jul 24 17:34:38 daniel NetworkManager[4580]: <info> [1500910478.5313] device (wlp3s0): state change: config -> ip-config (reason 'none') [50 70 0]
Jul 24 17:34:38 daniel NetworkManager[4580]: <info> [1500910478.5322] dhcp4 (wlp3s0): activation: beginning transaction (timeout in 45 seconds)
Jul 24 17:34:38 daniel NetworkManager[4580]: <info> [1500910478.5351] dhcp4 (wlp3s0): dhclient started with pid 6598
Jul 24 17:34:38 daniel dhclient[6598]: DHCPREQUEST of 192.168.2.104 on wlp3s0 to 255.255.255.255 port 67
Jul 24 17:34:39 daniel avahi-daemon[4584]: Joining mDNS multicast group on interface wlp3s0.IPv6 with address fe80::1513:ef38:270d:3b28.
Jul 24 17:34:39 daniel avahi-daemon[4584]: New relevant interface wlp3s0.IPv6 for mDNS.
Jul 24 17:34:39 daniel avahi-daemon[4584]: Registering new address record for fe80::1513:ef38:270d:3b28 on wlp3s0.*.
Jul 24 17:34:40 daniel NetworkManager[4580]: <info> [1500910480.2220] dhcp6 (wlp3s0): activation: beginning transaction (timeout in 45 seconds)
Jul 24 17:34:40 daniel NetworkManager[4580]: <warn> [1500910480.2221] dhcp6 (wlp3s0): hostname is not a FQDN, it will be ignored
Jul 24 17:34:40 daniel NetworkManager[4580]: <info> [1500910480.2249] dhcp6 (wlp3s0): dhclient started with pid 6603
Jul 24 17:34:40 daniel dhclient[6603]: XMT: Info-Request on wlp3s0, interval 980ms.
Jul 24 17:34:40 daniel dhclient[6603]: RCV: Reply message on wlp3s0 from fe80::1.
Jul 24 17:34:40 daniel NetworkManager[4580]: <info> [1500910480.5518] dhcp6 (wlp3s0): nameserver 'fe80::1'
Jul 24 17:34:40 daniel NetworkManager[4580]: <info> [1500910480.5519] dhcp6 (wlp3s0): state changed unknown -> bound
Jul 24 17:34:40 daniel NetworkManager[4580]: <info> [1500910480.5541] dhcp6 (wlp3s0): client pid 6603 exited with status 0
Jul 24 17:34:40 daniel NetworkManager[4580]: <info> [1500910480.5541] dhcp6 (wlp3s0): state changed bound -> done
Jul 24 17:34:40 daniel dbus[4579]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
Jul 24 17:34:40 daniel systemd[1]: Starting Laptop Mode Tools - Battery Polling Service...
Jul 24 17:34:40 daniel systemd[1]: Starting Network Manager Script Dispatcher Service...
Jul 24 17:34:40 daniel systemd[1]: Reloading Laptop Mode Tools.
Jul 24 17:34:40 daniel systemd[1]: Started Laptop Mode Tools - Battery Polling Service.
Jul 24 17:34:40 daniel dbus[4579]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jul 24 17:34:40 daniel systemd[1]: Started Network Manager Script Dispatcher Service.
Jul 24 17:34:40 daniel nm-dispatcher[6609]: req:1 'dhcp6-change' [wlp3s0]: new request (1 scripts)
Jul 24 17:34:40 daniel nm-dispatcher[6609]: req:1 'dhcp6-change' [wlp3s0]: start running ordered scripts...
Jul 24 17:34:40 daniel laptop_mode[6611]: Laptop mode
Jul 24 17:34:40 daniel laptop_mode[6611]: enabled, not active [unchanged]
Jul 24 17:34:40 daniel systemd[1]: Reloaded Laptop Mode Tools.
Jul 24 17:34:41 daniel avahi-daemon[4584]: Leaving mDNS multicast group on interface wlp3s0.IPv6 with address fe80::1513:ef38:270d:3b28.
Jul 24 17:34:41 daniel avahi-daemon[4584]: Joining mDNS multicast group on interface wlp3s0.IPv6 with address 2003:c1:2bce:9361:aa7e:f79d:cad2:b44d.
Jul 24 17:34:41 daniel NetworkManager[4580]: <info> [1500910481.2609] device (wlp3s0): state change: ip-config -> ip-check (reason 'none') [70 80 0]
Jul 24 17:34:41 daniel avahi-daemon[4584]: Registering new address record for 2003:c1:2bce:9361:aa7e:f79d:cad2:b44d on wlp3s0.*.
Jul 24 17:34:41 daniel avahi-daemon[4584]: Withdrawing address record for fe80::1513:ef38:270d:3b28 on wlp3s0.
Jul 24 17:34:41 daniel NetworkManager[4580]: <info> [1500910481.2620] device (wlp3s0): state change: ip-check -> secondaries (reason 'none') [80 90 0]
Jul 24 17:34:41 daniel NetworkManager[4580]: <info> [1500910481.2629] device (wlp3s0): state change: secondaries -> activated (reason 'none') [90 100 0]
Jul 24 17:34:41 daniel NetworkManager[4580]: <info> [1500910481.2631] manager: NetworkManager state is now CONNECTED_LOCAL
Jul 24 17:34:41 daniel nm-dispatcher[6609]: req:2 'connectivity-change': new request (1 scripts)
Jul 24 17:34:41 daniel nm-dispatcher[6609]: req:2 'connectivity-change': start running ordered scripts...
Jul 24 17:34:41 daniel NetworkManager[4580]: <info> [1500910481.3078] manager: NetworkManager state is now CONNECTED_GLOBAL
Jul 24 17:34:41 daniel NetworkManager[4580]: <info> [1500910481.3080] policy: set 'WLAN-749230' (wlp3s0) as default for IPv6 routing and DNS
Jul 24 17:34:41 daniel NetworkManager[4580]: <info> [1500910481.3085] device (wlp3s0): Activation: successful, device activated.
Jul 24 17:34:41 daniel nm-dispatcher[6609]: req:3 'up' [wlp3s0]: new request (1 scripts)
Jul 24 17:34:41 daniel nm-dispatcher[6609]: req:3 'up' [wlp3s0]: start running ordered scripts...
Jul 24 17:34:43 daniel dhclient[6598]: DHCPREQUEST of 192.168.2.104 on wlp3s0 to 255.255.255.255 port 67
Jul 24 17:34:56 daniel dhclient[6598]: DHCPDISCOVER on wlp3s0 to 255.255.255.255 port 67 interval 3
Jul 24 17:34:56 daniel dhclient[6598]: DHCPREQUEST of 192.168.2.104 on wlp3s0 to 255.255.255.255 port 67
Jul 24 17:34:56 daniel dhclient[6598]: DHCPOFFER of 192.168.2.104 from 192.168.2.1
Jul 24 17:34:56 daniel dhclient[6598]: DHCPACK of 192.168.2.104 from 192.168.2.1
Jul 24 17:34:56 daniel NetworkManager[4580]: <info> [1500910496.8239] dhcp4 (wlp3s0): address 192.168.2.104
Jul 24 17:34:56 daniel NetworkManager[4580]: <info> [1500910496.8239] dhcp4 (wlp3s0): plen 24 (255.255.255.0)
Jul 24 17:34:56 daniel NetworkManager[4580]: <info> [1500910496.8240] dhcp4 (wlp3s0): gateway 192.168.2.1
Jul 24 17:34:56 daniel NetworkManager[4580]: <info> [1500910496.8240] dhcp4 (wlp3s0): server identifier 192.168.2.1
Jul 24 17:34:56 daniel avahi-daemon[4584]: Joining mDNS multicast group on interface wlp3s0.IPv4 with address 192.168.2.104.
Jul 24 17:34:56 daniel NetworkManager[4580]: <info> [1500910496.8240] dhcp4 (wlp3s0): lease time 1814400
Jul 24 17:34:56 daniel avahi-daemon[4584]: New relevant interface wlp3s0.IPv4 for mDNS.
Jul 24 17:34:56 daniel NetworkManager[4580]: <info> [1500910496.8240] dhcp4 (wlp3s0): nameserver '192.168.2.1'
Jul 24 17:34:56 daniel avahi-daemon[4584]: Registering new address record for 192.168.2.104 on wlp3s0.IPv4.
Jul 24 17:34:56 daniel NetworkManager[4580]: <info> [1500910496.8241] dhcp4 (wlp3s0): nameserver '192.168.2.1'
Jul 24 17:34:56 daniel NetworkManager[4580]: <info> [1500910496.8241] dhcp4 (wlp3s0): domain name 'SpeedportEntry2090126200030'
Jul 24 17:34:56 daniel NetworkManager[4580]: <info> [1500910496.8241] dhcp4 (wlp3s0): state changed unknown -> bound
Jul 24 17:34:56 daniel NetworkManager[4580]: <info> [1500910496.8276] policy: set 'WLAN-749230' (wlp3s0) as default for IPv4 routing and DNS
Jul 24 17:34:56 daniel nm-dispatcher[6609]: req:4 'dhcp4-change' [wlp3s0]: new request (1 scripts)
Jul 24 17:34:56 daniel nm-dispatcher[6609]: req:4 'dhcp4-change' [wlp3s0]: start running ordered scripts...
Jul 24 17:34:56 daniel dhclient[6598]: bound to 192.168.2.104 -- renewal in 713652 seconds.
Code: Alles auswählen
Wiphy phy0
max # scan SSIDs: 20
max scan IEs length: 195 bytes
max # sched scan SSIDs: 0
max # match sets: 0
max # scan plans: 1
max scan plan interval: -1
max scan plan iterations: 0
Retry short limit: 7
Retry long limit: 4
Coverage class: 0 (up to 0m)
Device supports RSN-IBSS.
Supported Ciphers:
* WEP40 (00-0f-ac:1)
* WEP104 (00-0f-ac:5)
* TKIP (00-0f-ac:2)
* CCMP-128 (00-0f-ac:4)
* CCMP-256 (00-0f-ac:10)
* GCMP-128 (00-0f-ac:8)
* GCMP-256 (00-0f-ac:9)
Available Antennas: TX 0 RX 0
Supported interface modes:
* IBSS
* managed
* AP
* AP/VLAN
* monitor
Band 1:
Capabilities: 0x1072
HT20/HT40
Static SM Power Save
RX Greenfield
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 4 usec (0x05)
HT Max RX data rate: 300 Mbps
HT TX/RX MCS rate indexes supported: 0-15
Bitrates (non-HT):
* 1.0 Mbps
* 2.0 Mbps (short preamble supported)
* 5.5 Mbps (short preamble supported)
* 11.0 Mbps (short preamble supported)
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 2412 MHz [1] (15.0 dBm)
* 2417 MHz [2] (15.0 dBm)
* 2422 MHz [3] (15.0 dBm)
* 2427 MHz [4] (15.0 dBm)
* 2432 MHz [5] (15.0 dBm)
* 2437 MHz [6] (15.0 dBm)
* 2442 MHz [7] (15.0 dBm)
* 2447 MHz [8] (15.0 dBm)
* 2452 MHz [9] (15.0 dBm)
* 2457 MHz [10] (15.0 dBm)
* 2462 MHz [11] (15.0 dBm)
* 2467 MHz [12] (15.0 dBm) (no IR)
* 2472 MHz [13] (15.0 dBm) (no IR)
Band 2:
Capabilities: 0x1072
HT20/HT40
Static SM Power Save
RX Greenfield
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 4 usec (0x05)
HT Max RX data rate: 300 Mbps
HT TX/RX MCS rate indexes supported: 0-15
Bitrates (non-HT):
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 5180 MHz [36] (15.0 dBm) (no IR)
* 5200 MHz [40] (15.0 dBm) (no IR)
* 5220 MHz [44] (15.0 dBm) (no IR)
* 5240 MHz [48] (15.0 dBm) (no IR)
* 5260 MHz [52] (15.0 dBm) (no IR, radar detection)
* 5280 MHz [56] (15.0 dBm) (no IR, radar detection)
* 5300 MHz [60] (15.0 dBm) (no IR, radar detection)
* 5320 MHz [64] (15.0 dBm) (no IR, radar detection)
* 5500 MHz [100] (15.0 dBm) (no IR, radar detection)
* 5520 MHz [104] (15.0 dBm) (no IR, radar detection)
* 5540 MHz [108] (15.0 dBm) (no IR, radar detection)
* 5560 MHz [112] (15.0 dBm) (no IR, radar detection)
* 5580 MHz [116] (15.0 dBm) (no IR, radar detection)
* 5600 MHz [120] (15.0 dBm) (no IR, radar detection)
* 5620 MHz [124] (15.0 dBm) (no IR, radar detection)
* 5640 MHz [128] (15.0 dBm) (no IR, radar detection)
* 5660 MHz [132] (15.0 dBm) (no IR, radar detection)
* 5680 MHz [136] (15.0 dBm) (no IR, radar detection)
* 5700 MHz [140] (15.0 dBm) (no IR, radar detection)
* 5745 MHz [149] (13.0 dBm) (no IR)
* 5765 MHz [153] (13.0 dBm) (no IR)
* 5785 MHz [157] (13.0 dBm) (no IR)
* 5805 MHz [161] (13.0 dBm) (no IR)
* 5825 MHz [165] (13.0 dBm) (no IR)
Supported commands:
* new_interface
* set_interface
* new_key
* start_ap
* new_station
* new_mpath
* set_mesh_config
* set_bss
* authenticate
* associate
* deauthenticate
* disassociate
* join_ibss
* join_mesh
* set_tx_bitrate_mask
* frame
* frame_wait_cancel
* set_wiphy_netns
* set_channel
* set_wds_peer
* probe_client
* set_noack_map
* register_beacons
* start_p2p_device
* set_mcast_rate
* set_qos_map
* connect
* disconnect
Supported TX frame types:
* IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
Supported RX frame types:
* IBSS: 0x40 0xb0 0xc0 0xd0
* managed: 0x40 0xd0
* AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* mesh point: 0xb0 0xc0 0xd0
* P2P-client: 0x40 0xd0
* P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* P2P-device: 0x40 0xd0
WoWLAN support:
* wake up on disconnect
* wake up on magic packet
* wake up on pattern match, up to 20 patterns of 16-128 bytes,
maximum packet offset 0 bytes
* can do GTK rekeying
* wake up on GTK rekey failure
* wake up on EAP identity request
* wake up on rfkill release
software interface modes (can always be added):
* AP/VLAN
* monitor
valid interface combinations:
* #{ managed } <= 1, #{ AP } <= 1,
total <= 2, #channels <= 1, STA/AP BI must match
* #{ managed } <= 2,
total <= 2, #channels <= 1
HT Capability overrides:
* MCS: ff ff ff ff ff ff ff ff ff ff
* maximum A-MSDU length
* supported channel width
* short GI for 40 MHz
* max A-MPDU length exponent
* min MPDU start spacing
Device supports TX status socket option.
Device supports HT-IBSS.
Device supports SAE with AUTHENTICATE command
Device supports scan flush.
Device supports per-vif TX power setting
Driver supports full state transitions for AP/GO clients
Driver supports a userspace MPM
Device supports static SMPS
Device supports dynamic SMPS
Device supports configuring vdev MAC-addr on create.
Fortsetzung folgt im nächsten Post, da der Inhalt leider für einen Post zu groß war.
Zuletzt geändert von algorithm am 24.07.2017 17:56:05, insgesamt 1-mal geändert.
Re: WLAN-Verbindung bricht sofort ab
Und iw dev wlp3s0 scan, ergab:
Ich hoffe mir kann nun durch die Ausgaben der jeweiligen Kommandos besser geholfen werden und tut mir leid wenn ich davor leider zu wenig Anhaltspunkte zum Lösen des Problems geliefert habe, aber hätte eben nicht gewusst was für Informationen notwendig gewesen wären. Des Weiteren ist mir aufgefallen, dass das Problem sich nicht nur auf das die WLAN-Netzwerke in meiner Arbeit beschränkt sondern auf jedes WLAN-Netzwerk außer mein eigenes. Sprich ich bin komischerweise nicht in der Lage mich mit irgendeinem anderem Netzwerk außer meinem eigenen zu verbinden.
Code: Alles auswählen
BSS 94:4a:0c:cc:34:53(on wlp3s0) -- associated
TSF: 621726744229 usec (7d, 04:42:06)
freq: 2462
beacon interval: 100 TUs
capability: ESS Privacy ShortSlotTime RadioMeasure (0x1411)
signal: -68.00 dBm
last seen: 128 ms ago
Information elements from Probe Response frame:
SSID: WLAN-749230
Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0
DS Parameter set: channel 11
Country: DE Environment: Indoor/Outdoor
Channels [1 - 13] @ 20 dBm
ERP: Barker_Preamble_Mode
Extended supported rates: 6.0 9.0 12.0 48.0
RSN: * Version: 1
* Group cipher: CCMP
* Pairwise ciphers: CCMP
* Authentication suites: PSK
* Capabilities: 16-PTKSA-RC 1-GTKSA-RC (0x000c)
BSS Load:
* station count: 4
* channel utilisation: 73/255
* available admission capacity: 0 [*32us]
HT capabilities:
Capabilities: 0x9bc
HT20
SM Power Save disabled
RX Greenfield
RX HT20 SGI
TX STBC
RX STBC 1-stream
Max AMSDU length: 7935 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT RX MCS rate indexes supported: 0-15
HT TX MCS rate indexes are undefined
HT operation:
* primary channel: 11
* secondary channel offset: no secondary
* STA channel width: 20 MHz
* RIFS: 0
* HT protection: no
* non-GF present: 1
* OBSS non-GF present: 0
* dual beacon: 0
* dual CTS protection: 0
* STBC beacon: 0
* L-SIG TXOP Prot: 0
* PCO active: 0
* PCO phase: 0
Overlapping BSS scan params:
* passive dwell: 20 TUs
* active dwell: 10 TUs
* channel width trigger scan interval: 300 s
* scan passive total per channel: 200 TUs
* scan active total per channel: 20 TUs
* BSS width channel transition delay factor: 5
* OBSS Scan Activity Threshold: 0.25 %
Extended capabilities: HT Information Exchange Supported, Extended Channel Switching, BSS Transition, 6
WPS: * Version: 1.0
* Wi-Fi Protected Setup State: 2 (Configured)
* Response Type: 3 (AP)
* UUID: 7f263ce0-8c47-f358-e4bd-6c9538bfc926
* Manufacturer: Broadcom
* Model: Broadcom
* Model Number: 123456
* Serial Number: 1234
* Primary Device Type: 6-0050f204-1
* Device name: BroadcomAP
* Config methods: Ethernet, Label, Keypad
* RF Bands: 0x1
* Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20
WMM: * Parameter version 1
* u-APSD
* BE: CW 15-1023, AIFSN 3
* BK: CW 15-1023, AIFSN 7
* VI: CW 7-15, AIFSN 2, TXOP 3008 usec
* VO: CW 3-7, AIFSN 2, TXOP 1504 usec
BSS 58:1f:28:dc:65:2e(on wlp3s0)
TSF: 942213437133 usec (10d, 21:43:33)
freq: 2427
beacon interval: 100 TUs
capability: ESS Privacy ShortSlotTime RadioMeasure (0x1411)
signal: -65.00 dBm
last seen: 5332 ms ago
Information elements from Probe Response frame:
SSID: WLANL5DAJC
Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0
DS Parameter set: channel 4
ERP: <no flags>
ERP D4.0: <no flags>
RSN: * Version: 1
* Group cipher: CCMP
* Pairwise ciphers: CCMP
* Authentication suites: PSK
* Capabilities: 16-PTKSA-RC 1-GTKSA-RC (0x000c)
Extended supported rates: 6.0 9.0 12.0 48.0
HT capabilities:
Capabilities: 0x19ac
HT20
SM Power Save disabled
RX HT20 SGI
TX STBC
RX STBC 1-stream
Max AMSDU length: 7935 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT RX MCS rate indexes supported: 0-15
HT TX MCS rate indexes are undefined
HT operation:
* primary channel: 4
* secondary channel offset: no secondary
* STA channel width: 20 MHz
* RIFS: 0
* HT protection: no
* non-GF present: 1
* OBSS non-GF present: 0
* dual beacon: 0
* dual CTS protection: 0
* STBC beacon: 0
* L-SIG TXOP Prot: 0
* PCO active: 0
* PCO phase: 0
Overlapping BSS scan params:
* passive dwell: 20 TUs
* active dwell: 10 TUs
* channel width trigger scan interval: 300 s
* scan passive total per channel: 200 TUs
* scan active total per channel: 20 TUs
* BSS width channel transition delay factor: 5
* OBSS Scan Activity Threshold: 0.25 %
Extended capabilities: HT Information Exchange Supported, Extended Channel Switching, 6
WPS: * Version: 1.0
* Wi-Fi Protected Setup State: 2 (Configured)
* Response Type: 3 (AP)
* UUID: 5b88a736-7783-2b32-2419-7f21b362fd93
* Manufacturer: Broadcom
* Model: Broadcom
* Model Number: 123456
* Serial Number: 1234
* Primary Device Type: 6-0050f204-1
* Device name: BroadcomAP
* Config methods:
* RF Bands: 0x1
* Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20
WMM: * Parameter version 1
* u-APSD
* BE: CW 15-1023, AIFSN 3
* BK: CW 15-1023, AIFSN 7
* VI: CW 7-15, AIFSN 2, TXOP 3008 usec
* VO: CW 3-7, AIFSN 2, TXOP 1504 usec
BSS 58:1f:28:dc:65:2f(on wlp3s0)
TSF: 942213442931 usec (10d, 21:43:33)
freq: 2427
beacon interval: 100 TUs
capability: ESS ShortSlotTime RadioMeasure (0x1401)
signal: -65.00 dBm
last seen: 5328 ms ago
Information elements from Probe Response frame:
SSID: Telekom_FON
Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0
DS Parameter set: channel 4
ERP: <no flags>
ERP D4.0: <no flags>
Extended supported rates: 6.0 9.0 12.0 48.0
HT capabilities:
Capabilities: 0x19ac
HT20
SM Power Save disabled
RX HT20 SGI
TX STBC
RX STBC 1-stream
Max AMSDU length: 7935 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT RX MCS rate indexes supported: 0-15
HT TX MCS rate indexes are undefined
HT operation:
* primary channel: 4
* secondary channel offset: no secondary
* STA channel width: 20 MHz
* RIFS: 0
* HT protection: no
* non-GF present: 1
* OBSS non-GF present: 0
* dual beacon: 0
* dual CTS protection: 0
* STBC beacon: 0
* L-SIG TXOP Prot: 0
* PCO active: 0
* PCO phase: 0
Overlapping BSS scan params:
* passive dwell: 20 TUs
* active dwell: 10 TUs
* channel width trigger scan interval: 300 s
* scan passive total per channel: 200 TUs
* scan active total per channel: 20 TUs
* BSS width channel transition delay factor: 5
* OBSS Scan Activity Threshold: 0.25 %
Extended capabilities: HT Information Exchange Supported, Extended Channel Switching, 6
WMM: * Parameter version 1
* u-APSD
* BE: CW 15-1023, AIFSN 3
* BK: CW 15-1023, AIFSN 7
* VI: CW 7-15, AIFSN 2, TXOP 3008 usec
* VO: CW 3-7, AIFSN 2, TXOP 1504 usec
BSS 38:10:d5:6d:cf:d3(on wlp3s0)
TSF: 426818930713 usec (4d, 22:33:38)
freq: 2437
beacon interval: 100 TUs
capability: ESS Privacy ShortPreamble ShortSlotTime (0x0431)
signal: -79.00 dBm
last seen: 5160 ms ago
SSID: box
Supported rates: 1.0* 2.0* 5.5* 11.0* 6.0* 9.0 12.0* 18.0
DS Parameter set: channel 6
Country: DE Environment: Indoor/Outdoor
Channels [1 - 13] @ 20 dBm
ERP: <no flags>
Extended supported rates: 24.0* 36.0 48.0 54.0
HT capabilities:
Capabilities: 0x1ad
RX LDPC
HT20
SM Power Save disabled
RX HT20 SGI
TX STBC
RX STBC 1-stream
Max AMSDU length: 3839 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT TX/RX MCS rate indexes supported: 0-23
HT operation:
* primary channel: 6
* secondary channel offset: no secondary
* STA channel width: 20 MHz
* RIFS: 1
* HT protection: no
* non-GF present: 1
* OBSS non-GF present: 0
* dual beacon: 0
* dual CTS protection: 0
* STBC beacon: 0
* L-SIG TXOP Prot: 0
* PCO active: 0
* PCO phase: 0
Extended capabilities: 6
WMM: * Parameter version 1
* BE: CW 15-1023, AIFSN 3
* BK: CW 15-1023, AIFSN 7
* VI: CW 7-15, AIFSN 2, TXOP 3008 usec
* VO: CW 3-7, AIFSN 2, TXOP 1504 usec
RSN: * Version: 1
* Group cipher: CCMP
* Pairwise ciphers: CCMP
* Authentication suites: PSK
* Capabilities: 1-PTKSA-RC 1-GTKSA-RC (0x0000)
WPS: * Version: 1.0
* Wi-Fi Protected Setup State: 2 (Configured)
* Response Type: 3 (AP)
* UUID: 211264a4-e33d-1edc-a293-3810d56dcfd3
* Manufacturer: AVM
* Model: FBox
* Model Number: 0000
* Serial Number: 0000
* Primary Device Type: 6-0050f204-1
* Device name: FBox
* Config methods: Display, PBC, Keypad
* RF Bands: 0x1
* Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20
BSS e4:71:85:30:fd:8c(on wlp3s0)
TSF: 1062745769454 usec (12d, 07:12:25)
freq: 2452
beacon interval: 100 TUs
capability: ESS Privacy ShortPreamble ShortSlotTime (0x0431)
signal: -67.00 dBm
last seen: 4912 ms ago
Information elements from Probe Response frame:
SSID: Almond+ 2.4GHz
Supported rates: 1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0 18.0
DS Parameter set: channel 9
Country: US Environment: Indoor/Outdoor
Channels [1 - 11] @ 30 dBm
ERP: <no flags>
Extended supported rates: 24.0 36.0 48.0 54.0
HT capabilities:
Capabilities: 0x1ad
RX LDPC
HT20
SM Power Save disabled
RX HT20 SGI
TX STBC
RX STBC 1-stream
Max AMSDU length: 3839 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT TX/RX MCS rate indexes supported: 0-23
HT operation:
* primary channel: 9
* secondary channel offset: no secondary
* STA channel width: 20 MHz
* RIFS: 1
* HT protection: no
* non-GF present: 1
* OBSS non-GF present: 0
* dual beacon: 0
* dual CTS protection: 0
* STBC beacon: 0
* L-SIG TXOP Prot: 0
* PCO active: 0
* PCO phase: 0
Overlapping BSS scan params:
* passive dwell: 20 TUs
* active dwell: 10 TUs
* channel width trigger scan interval: 300 s
* scan passive total per channel: 200 TUs
* scan active total per channel: 20 TUs
* BSS width channel transition delay factor: 5
* OBSS Scan Activity Threshold: 0.25 %
Extended capabilities: HT Information Exchange Supported, 6
WMM: * Parameter version 1
* u-APSD
* BE: CW 15-1023, AIFSN 3
* BK: CW 15-1023, AIFSN 7
* VI: CW 7-15, AIFSN 2, TXOP 3008 usec
* VO: CW 3-7, AIFSN 2, TXOP 1504 usec
RSN: * Version: 1
* Group cipher: TKIP
* Pairwise ciphers: CCMP TKIP
* Authentication suites: PSK
* Capabilities: 16-PTKSA-RC 1-GTKSA-RC (0x000c)
WPA: * Version: 1
* Group cipher: TKIP
* Pairwise ciphers: CCMP TKIP
* Authentication suites: PSK
BSS 00:fc:8d:0f:90:3a(on wlp3s0)
TSF: 1061616540554 usec (12d, 06:53:36)
freq: 2437
beacon interval: 100 TUs
capability: ESS ShortSlotTime APSD (0x0c01)
signal: -75.00 dBm
last seen: 5340 ms ago
Information elements from Probe Response frame:
SSID: Vodafone Hotspot
Supported rates: 1.0* 2.0* 5.5* 11.0* 9.0 18.0 36.0 54.0
DS Parameter set: channel 6
Extended supported rates: 6.0 12.0 24.0 48.0
Country: DE Environment: Indoor/Outdoor
Channels [1 - 11] @ 20 dBm
TIM: DTIM Count 0 DTIM Period 1 Bitmap Control 0x0 Bitmap[0] 0x0
ERP: Barker_Preamble_Mode
HT capabilities:
Capabilities: 0x106e
HT20/HT40
SM Power Save disabled
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 4 usec (0x05)
HT RX MCS rate indexes supported: 0-15, 32
HT TX MCS rate indexes are undefined
HT operation:
* primary channel: 6
* secondary channel offset: no secondary
* STA channel width: 20 MHz
* RIFS: 0
* HT protection: 20 MHz
* non-GF present: 1
* OBSS non-GF present: 0
* dual beacon: 0
* dual CTS protection: 0
* STBC beacon: 0
* L-SIG TXOP Prot: 0
* PCO active: 0
* PCO phase: 0
Overlapping BSS scan params:
* passive dwell: 20 TUs
* active dwell: 10 TUs
* channel width trigger scan interval: 300 s
* scan passive total per channel: 200 TUs
* scan active total per channel: 20 TUs
* BSS width channel transition delay factor: 5
* OBSS Scan Activity Threshold: 0.25 %
Extended capabilities: HT Information Exchange Supported
WMM: * Parameter version 1
* u-APSD
* BE: CW 15-1023, AIFSN 3
* BK: CW 15-1023, AIFSN 7
* VI: CW 7-15, AIFSN 2, TXOP 3008 usec
* VO: CW 3-7, AIFSN 2, TXOP 1504 usec
BSS Load:
* station count: 2
* channel utilisation: 27/255
* available admission capacity: 31250 [*32us]
BSS b6:84:c9:00:a6:75(on wlp3s0)
TSF: 1061817881984 usec (12d, 06:56:57)
freq: 2437
beacon interval: 100 TUs
capability: ESS ShortPreamble ShortSlotTime (0x0421)
signal: -87.00 dBm
last seen: 5288 ms ago
Information elements from Probe Response frame:
SSID: Vodafone Homespot
Supported rates: 1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0 18.0
DS Parameter set: channel 6
TIM: DTIM Count 0 DTIM Period 1 Bitmap Control 0x0 Bitmap[0] 0x0
Country: DE Environment: Indoor/Outdoor
Channels [1 - 13] @ 20 dBm
ERP: <no flags>
Extended supported rates: 24.0 36.0 48.0 54.0
HT capabilities:
Capabilities: 0x1ad
RX LDPC
HT20
SM Power Save disabled
RX HT20 SGI
TX STBC
RX STBC 1-stream
Max AMSDU length: 3839 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT TX/RX MCS rate indexes supported: 0-23
HT operation:
* primary channel: 6
* secondary channel offset: no secondary
* STA channel width: 20 MHz
* RIFS: 1
* HT protection: no
* non-GF present: 0
* OBSS non-GF present: 0
* dual beacon: 0
* dual CTS protection: 0
* STBC beacon: 0
* L-SIG TXOP Prot: 0
* PCO active: 0
* PCO phase: 0
Overlapping BSS scan params:
* passive dwell: 20 TUs
* active dwell: 10 TUs
* channel width trigger scan interval: 300 s
* scan passive total per channel: 200 TUs
* scan active total per channel: 20 TUs
* BSS width channel transition delay factor: 5
* OBSS Scan Activity Threshold: 0.25 %
Extended capabilities: HT Information Exchange Supported, SSID List, 6
WMM: * Parameter version 1
* u-APSD
* BE: CW 15-1023, AIFSN 3
* BK: CW 15-1023, AIFSN 7
* VI: CW 7-15, AIFSN 2, TXOP 3008 usec
* VO: CW 3-7, AIFSN 2, TXOP 1504 usec
BSS 90:5c:44:2d:0a:d9(on wlp3s0)
TSF: 888655974722 usec (10d, 06:50:55)
freq: 2437
beacon interval: 100 TUs
capability: ESS Privacy ShortPreamble ShortSlotTime (0x0431)
signal: -85.00 dBm
last seen: 5284 ms ago
Information elements from Probe Response frame:
SSID: KabelBox-7C02
Supported rates: 1.0* 2.0* 5.5* 11.0* 9.0 18.0 36.0 54.0
DS Parameter set: channel 6
Extended supported rates: 6.0 12.0 24.0 48.0
Country: DE Environment: Indoor/Outdoor
Channels [1 - 1] @ 20 dBm
Channels [2 - 2] @ 20 dBm
Channels [3 - 3] @ 20 dBm
Channels [4 - 4] @ 20 dBm
Channels [5 - 5] @ 20 dBm
Channels [6 - 6] @ 20 dBm
Channels [7 - 7] @ 20 dBm
Channels [8 - 8] @ 20 dBm
Channels [9 - 9] @ 20 dBm
Channels [10 - 10] @ 20 dBm
Channels [11 - 11] @ 20 dBm
Channels [12 - 12] @ 20 dBm
Channels [13 - 13] @ 20 dBm
TIM: DTIM Count 0 DTIM Period 1 Bitmap Control 0x0 Bitmap[0] 0xc
RSN: * Version: 1
* Group cipher: CCMP
* Pairwise ciphers: CCMP
* Authentication suites: PSK
* Capabilities: 1-PTKSA-RC 1-GTKSA-RC (0x0000)
WPS: * Version: 1.0
* Wi-Fi Protected Setup State: 2 (Configured)
* UUID: 68bd5180-1dd2-11b2-8601-7ab7e8deb5bf
* RF Bands: 0x1
* Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20
ERP: <no flags>
HT capabilities:
Capabilities: 0x11ee
HT20/HT40
SM Power Save disabled
RX HT20 SGI
RX HT40 SGI
TX STBC
RX STBC 1-stream
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 4 usec (0x05)
HT RX MCS rate indexes supported: 0-23, 32
HT TX MCS rate indexes are undefined
HT operation:
* primary channel: 6
* secondary channel offset: no secondary
* STA channel width: 20 MHz
* RIFS: 0
* HT protection: no
* non-GF present: 1
* OBSS non-GF present: 0
* dual beacon: 0
* dual CTS protection: 0
* STBC beacon: 0
* L-SIG TXOP Prot: 0
* PCO active: 0
* PCO phase: 0
Overlapping BSS scan params:
* passive dwell: 20 TUs
* active dwell: 10 TUs
* channel width trigger scan interval: 300 s
* scan passive total per channel: 200 TUs
* scan active total per channel: 20 TUs
* BSS width channel transition delay factor: 5
* OBSS Scan Activity Threshold: 0.25 %
Extended capabilities: HT Information Exchange Supported
WMM: * Parameter version 1
* BE: CW 15-1023, AIFSN 3
* BK: CW 15-1023, AIFSN 7
* VI: CW 7-15, AIFSN 2, TXOP 3008 usec
* VO: CW 3-7, AIFSN 2, TXOP 1504 usec
BSS Load:
* station count: 1
* channel utilisation: 22/255
* available admission capacity: 31250 [*32us]
BSS 90:5c:44:50:bc:3f(on wlp3s0)
TSF: 1061843769610 usec (12d, 06:57:23)
freq: 2437
beacon interval: 100 TUs
capability: ESS Privacy ShortPreamble ShortSlotTime (0x0431)
signal: -82.00 dBm
last seen: 5116 ms ago
Information elements from Probe Response frame:
SSID: KabelBox-6510
Supported rates: 1.0* 2.0* 5.5* 11.0* 9.0 18.0 36.0 54.0
DS Parameter set: channel 6
Extended supported rates: 6.0 12.0 24.0 48.0
Country: DE Environment: Indoor/Outdoor
Channels [1 - 1] @ 20 dBm
Channels [2 - 2] @ 20 dBm
Channels [3 - 3] @ 20 dBm
Channels [4 - 4] @ 20 dBm
Channels [5 - 5] @ 20 dBm
Channels [6 - 6] @ 20 dBm
Channels [7 - 7] @ 20 dBm
Channels [8 - 8] @ 20 dBm
Channels [9 - 9] @ 20 dBm
Channels [10 - 10] @ 20 dBm
Channels [11 - 11] @ 20 dBm
Channels [12 - 12] @ 20 dBm
Channels [13 - 13] @ 20 dBm
TIM: DTIM Count 0 DTIM Period 1 Bitmap Control 0x0 Bitmap[0] 0x0
RSN: * Version: 1
* Group cipher: CCMP
* Pairwise ciphers: CCMP
* Authentication suites: PSK
* Capabilities: 1-PTKSA-RC 1-GTKSA-RC (0x0000)
WPS: * Version: 1.0
* Wi-Fi Protected Setup State: 2 (Configured)
* UUID: 2564e200-1dd6-11b2-8601-79b77815d5bf
* RF Bands: 0x1
* Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20
ERP: <no flags>
HT capabilities:
Capabilities: 0x11ee
HT20/HT40
SM Power Save disabled
RX HT20 SGI
RX HT40 SGI
TX STBC
RX STBC 1-stream
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 4 usec (0x05)
HT RX MCS rate indexes supported: 0-23, 32
HT TX MCS rate indexes are undefined
HT operation:
* primary channel: 6
* secondary channel offset: no secondary
* STA channel width: 20 MHz
* RIFS: 0
* HT protection: 20 MHz
* non-GF present: 1
* OBSS non-GF present: 0
* dual beacon: 0
* dual CTS protection: 0
* STBC beacon: 0
* L-SIG TXOP Prot: 0
* PCO active: 0
* PCO phase: 0
Overlapping BSS scan params:
* passive dwell: 20 TUs
* active dwell: 10 TUs
* channel width trigger scan interval: 300 s
* scan passive total per channel: 200 TUs
* scan active total per channel: 20 TUs
* BSS width channel transition delay factor: 5
* OBSS Scan Activity Threshold: 0.25 %
Extended capabilities: HT Information Exchange Supported
WMM: * Parameter version 1
* BE: CW 15-1023, AIFSN 3
* BK: CW 15-1023, AIFSN 7
* VI: CW 7-15, AIFSN 2, TXOP 3008 usec
* VO: CW 3-7, AIFSN 2, TXOP 1504 usec
BSS Load:
* station count: 2
* channel utilisation: 27/255
* available admission capacity: 31250 [*32us]
-
BenutzerGa4gooPh
Re: WLAN-Verbindung bricht sofort ab
Mit des SSID "Almond+ 2.4GHz" warst du anfänglich verbunden, IP-Adresse erfolgreich per DHCP erhalten.
Sonderzeichen in SSIDs sollte man vermeiden, "." und Leerzeichen sind wohl erlaubt.
Information: https://wiki.ubuntuusers.de/WLAN/Sonderzeichen/
Empfangspegel mit -67 dBm genügend, Minimum wäre etwa -75 dBm.
Zu SSID "WLAN-749230":
Nach etlichen Authentifizierungsfehlern wurde am Ende erfolgreich verbunden. Was während oder aufgrund der Authentifizierungsfehler umkonfiguriert wurde (Passwort, Authentifizierung?), kannst nur du wissen.
Empfangspegel mit -68 dBm genügend, Minimum wäre etwa -75 dBm.
Die Sende-Kanäle der APs überlagern sich (9 + 11)! 4 Kanäle Abstand!
Verwunderlich finde ich, dass auf 2 verschiedenen SSIDs der gleiche DHCP-Pool, das gleiche NW verwendet wird. Mit unterschiedlichen SSIDs wird eigentlich getrennt. Ausnahme: Trennung von 2,4 und 5 GHz.
PS: Dein eigenes WLAN ist aber schon abgesichert (WPA2-PSK/AES)?
Spätere Versuche schlugen fehl. Umkonfiguration vorgenommen?Jul 24 17:34:06 daniel NetworkManager[4580]: <info> [1500910446.9643] audit: op="connection-activate" uuid="959b51b3-c103-4344-bf27-c665dfe1ad9a" name="Almond+ 2.4GHz" pid=5839 uid=1000 result="success"
Sonderzeichen in SSIDs sollte man vermeiden, "." und Leerzeichen sind wohl erlaubt.
Information: https://wiki.ubuntuusers.de/WLAN/Sonderzeichen/
Empfangspegel mit -67 dBm genügend, Minimum wäre etwa -75 dBm.
Zu SSID "WLAN-749230":
Nach etlichen Authentifizierungsfehlern wurde am Ende erfolgreich verbunden. Was während oder aufgrund der Authentifizierungsfehler umkonfiguriert wurde (Passwort, Authentifizierung?), kannst nur du wissen.
Empfangspegel mit -68 dBm genügend, Minimum wäre etwa -75 dBm.
Die Sende-Kanäle der APs überlagern sich (9 + 11)! 4 Kanäle Abstand!
Verwunderlich finde ich, dass auf 2 verschiedenen SSIDs der gleiche DHCP-Pool, das gleiche NW verwendet wird. Mit unterschiedlichen SSIDs wird eigentlich getrennt. Ausnahme: Trennung von 2,4 und 5 GHz.
Das Logging sagt was anderes.Sprich ich bin komischerweise nicht in der Lage mich mit irgendeinem anderem Netzwerk außer meinem eigenen zu verbinden.
PS: Dein eigenes WLAN ist aber schon abgesichert (WPA2-PSK/AES)?
Re: WLAN-Verbindung bricht sofort ab
Naja das stimmt nicht ganz ich war zu beginn mit meinen WLAN-Netzwerk verbunden (WLAN-749230) und anschließend hatte ich versucht über das network-manager-applet in der Taskleiste mich zu "Almond+ 2.4GHz" zu verbinden, was irgendein Netzwerk in meiner Umgebung ist. Weshalb ich auch keinen Einfluss darauf habe wie der Netzwerkname dieses WLANs ist. Und auch kann ich gar nicht erfolgreich mit diesem Netzwerk verbunden gewesen sein das ich keinerlei Passwort für dieses WLAN habe. Und ich habe nichts weiter versucht als mich mit dem WLAN-Netzwerken zu verbinden also keine Umkonfigurierung oder sonstiges. Daher verstehe ich nicht weshalb ich mich mit keinerlei WLAN-Netzwerken in der Umgebung verbinden kann außer mit meinem. Denn normalerweise müsste es ja so sein das wenn ich nachdem ich via. network-manager-applet versuche die Verbindung zu einem anderem WLAN aufzubauen, dass ich erstmal nachdem Passwort gefragt werde, was überhaupt nicht der Fall ist.
-
BenutzerGa4gooPh
Re: WLAN-Verbindung bricht sofort ab
Nun, ich nahm an, wir testen sinnvollerweise den Verbindungsaufbau zum AP deines Arbeitgebers - Problem lt. Eingangsbeitrag. Und du lieferst entsprechende Logs. War für mich das Naheliegende.
Also ist das konkrete und einzige Problem - und bisher nicht geschrieben:
https://wiki.ubuntuusers.de/NetworkManager/
Das natürlich mit einem Netzwerk, zu welchem dir Zugangsdaten bekannt sind, z. B. das des Arbeitgebers. Oder die eigenen Verbindungsdaten löschen und neu einrichten. Ein Passwortmanager verwendest du nicht? Ansonsten diesbezügliche Hinweise im Link (Abschnitt Drahtlose Netzwerke) beachten. Gilt auch für Passwortmanager unter KDE/Plasma.
Wenn nichts hilft, den NW-Manager "purgen" (löscht versaute Konfigdateien ) und neu installieren, konfigurieren:
KDE-Pakete musst du dir selber raussuchen.
Also ist das konkrete und einzige Problem - und bisher nicht geschrieben:
Somit würde ich mal manuell einstellen (Verbindung bearbeiten).algorithm hat geschrieben:24.07.2017 20:31:51wenn ich nachdem ich via. network-manager-applet versuche die Verbindung zu einem anderem WLAN aufzubauen, dass ich erstmal nachdem Passwort gefragt werde, was überhaupt nicht der Fall ist.
https://wiki.ubuntuusers.de/NetworkManager/
Das natürlich mit einem Netzwerk, zu welchem dir Zugangsdaten bekannt sind, z. B. das des Arbeitgebers. Oder die eigenen Verbindungsdaten löschen und neu einrichten. Ein Passwortmanager verwendest du nicht? Ansonsten diesbezügliche Hinweise im Link (Abschnitt Drahtlose Netzwerke) beachten. Gilt auch für Passwortmanager unter KDE/Plasma.
Wenn nichts hilft, den NW-Manager "purgen" (löscht versaute Konfigdateien ) und neu installieren, konfigurieren:
Code: Alles auswählen
apt purge network-manager network-manager-gnome
apt update
apt upgrade
apt install network-manager network-manager-gnome
Re: WLAN-Verbindung bricht sofort ab
Super danke dir für deine Hilfe! Hast mir jetzt nicht direkt geholfen aber den richtigen Ansatz geliefert. Habs jetzt so gelöst das ich folgende Pakete "gepurged" habe:
- wpasupplicant
- network-manager
- network-manager-gnome
Anschließend hatte ich den wpa_supplicant neu von der Debian Pakageseite runtergeladen (deb-Paket) und im Anschluss hatte ich dann manuell eine Verbindung zu meinem Netzwerk aufgebaut und einen komplett anderen Netzwerkmanager installiert (wicd) mit dem ich viel zufriedener bin als mit dem bisherigen. Und jetzt funktioniert auch alles wieder.
- wpasupplicant
- network-manager
- network-manager-gnome
Anschließend hatte ich den wpa_supplicant neu von der Debian Pakageseite runtergeladen (deb-Paket) und im Anschluss hatte ich dann manuell eine Verbindung zu meinem Netzwerk aufgebaut und einen komplett anderen Netzwerkmanager installiert (wicd) mit dem ich viel zufriedener bin als mit dem bisherigen. Und jetzt funktioniert auch alles wieder.