hallo Jana66
Hab den Lappi gestern Abend mal ne Zeitlang laufen lassen und Internet Radio gehört. Es gab immer wieder Abbrüche in der Verbindung. Allerdings wurde die Verbindung dann [meist] wieder automatisch aufgebaut. Lass es grad mal laufen und mit protokollieren ---> Bisher keinen Ausfall
Habe gestern noch was gemacht, was ich nicht erwähnt habe
von der Seite
https://digitz.org/blog/wifi-issue-on-a ... vice-0042/
Hab ich folgendes ausgeführt, ohne alerdings genau zu wissen, was ich da so tue:
Aus dem Workaround:
# Modify the config files:
Code: Alles auswählen
echo "options ath10k_core skip_otp=y" | sudo tee /etc/modprobe.d/ath10k_core.conf
Die nachfolgenden Schritte:
Code: Alles auswählen
#Download the backport
wget https://www.kernel.org/pub/linux/kernel/projects/backports/2015/11/20/backports-20151120.tar.gz
# Extract it
tar zxvf backports-20151120.tar.gz
# cd to the directory, compile and install it. The commands 'make' and 'make install' will take some time to finish
cd backports-20151120
make defconfig-wifi
make
sudo make install
Hab ich nicht ausgeführt, da die Kernel Treiber nun schon 2 Jahre alt sind, und pausenlos Fehlermeldungen beim kompilieren kamen weil noch dies und das an libs fehlte
weiter ging es mit
Code: Alles auswählen
# Download the firmware for the WiFi card
git clone https://github.com/kvalo/ath10k-firmware.git
# Copy the firmware to appropriate locations.
sudo cp -r ath10k-firmware/QCA9377 /lib/firmware/ath10k/
sudo cp /lib/firmware/ath10k/QCA9377/hw1.0/firmware-5.bin_WLAN.TF.1.0-00267-1 /lib/firmware/ath10k/QCA9377/hw1.0/firmware-5.bin
Das Verzeichniss sieht jetzt so aus:
hans@aspire:/lib/firmware/ath10k/QCA9377/hw1.0$ ls -ltc
insgesamt 1664
-rw-r--r-- 1 root root 605908 Apr 24 17:33 firmware-5.bin
drwxr-xr-x 2 root root 4096 Apr 24 17:32 untested
-rw-r--r-- 1 root root 427668 Apr 24 17:32 board-2.bin
-rw-r--r-- 1 root root 8124 Apr 24 17:32 board.bin
-rw-r--r-- 1 root root 605908 Apr 24 17:32 firmware-5.bin_WLAN.TF.1.0-00267-1
-rw-r--r-- 1 root root 46142 Apr 24 17:32 notice.txt_WLAN.TF.1.0-00267-1
Das alte sah so aus:
/lib/firmware/ath10k/QCA9377/hw1.0# ls -ltc
insgesamt 1020
-rw-r--r-- 1 root root 427668 Dez 24 09:56 board-2.bin
-rw-r--r-- 1 root root 8124 Dez 24 09:56 board.bin
-rw-r--r-- 1 root root 605908 Dez 24 09:56 firmware-5.bin
Das erklärt auch die Zeilen von hier:
viewtopic.php?f=30&t=164985#p1129977
Code: Alles auswählen
[ 4.270291] ath10k_pci 0000:03:00.0: firmware: direct-loading firmware ath10k/QCA9377/hw1.0/firmware-5.bin
[ 4.270304] ath10k_pci 0000:03:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6
[ 4.270308] ath10k_pci 0000:03:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[ 4.271506] ath10k_pci 0000:03:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7
[ 4.339334] ath10k_pci 0000:03:00.0: firmware: direct-loading firmware ath10k/QCA9377/hw1.0/board-2.bin
[ 4.339805] ath10k_pci 0000:03:00.0: board_file api 2 bmi_id N/A crc32 93da0176
[ 6.165124] ath10k_pci 0000:03:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
Jana66 hat geschrieben:
Jana66 hat geschrieben: Welcher WLAN-Router?
Fritz!Box 7330 mit Fritz!Os 06.53
Da hatte doch erst einer Probleme nach Firmware-Update:
viewtopic.php?f=30&t=164930
Aber andersrum, Gast ging nicht. Thread ungelöst, deshalb eventuell anderen Router probieren oder FW-Downgrade?!
Umlaute oder Sonderzeichen im WPA2-Passwort? Underline geht.
Nee - das Problem war, dass ich gestern, im Zuge der Fehlersuche natürlich auch den Router überprüft habe, und mir ein Update angeboten wurde.
Das Update ist hängen geblieben und ich hab versehentlich ne alte config-Datei zurück gesichert. Dabei wurde die MAC Adresse meines neuen Lappis "unterschlagen
Erst danach hab ich das Update aber mit der iso, die ich dann vorher runter geladen habe durchgeführt und die MAC-Adresse wieder zugefügt.
Mein
Code: Alles auswählen
dpkg -l |grep firmware*
ii firmware-atheros 0.43 all Binary firmware for Atheros wireless cards
ii intel-microcode 3.20161104.1~deb8u1 amd64 Processor microcode firmware for Intel CPUs
Du hast irgendwie jeden Treiber installiert ...
Nu haste zu tun ...
LG Jana[/quote]
Das mit den Treibern liegt an SparkyLinux die hauen gleich alles in das Installations-ISO, da bin ich (fast) unschuldig
Aber da gibt es noch einiges zu bereinigen - an anderer Stelle - in einem neuen Thread.
Was Bleibt, sind die Unterbrechungen. In der Zeit, in der ich das schreibe ist es doch inzwischen drei Mal passiert.
iw event -r -f rund um den Abbruch und manuellem Neuverbinden:
Code: Alles auswählen
6.646436: wlan0 (phy #0): scan finished: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785 5805 5825, ""
8.080998: wlan0 (phy #0): CQM event: peer 9c:c7:a6:57:f9:52 didn't ACK 50 packets
20.242112: wlan0 (phy #0): CQM event: peer 9c:c7:a6:57:f9:52 didn't ACK 50 packets
19.210238: wlan0 (phy #0): CQM event: peer 9c:c7:a6:57:f9:52 didn't ACK 50 packets
19.986201: wlan0 (phy #0): CQM event: peer 9c:c7:a6:57:f9:52 didn't ACK 50 packets
5.462623: wlan0: del station 9c:c7:a6:57:f9:52
0.006002: wlan0 (phy #0): deauth 94:e9:79:ab:0a:fd -> 9c:c7:a6:57:f9:52 reason 3: Deauthenticated because sending station is leaving (or has left) the IBSS or ESS [frame: c0 00 00 00 9c c7 a6 57 f9 52 94 e9 79 ab 0a fd 9c c7 a6 57 f9 52 00 00 03 00]
0.000028: wlan0 (phy #0): disconnected (local request)
0.007641: phy #0: regulatory domain change: set to world roaming by the wireless core upon initialization request
0.113822: wlan0 (phy #0): scan started
0.635291: phy #0: beacon hint:
phy0 5180 MHz [36]:
o Initiating radiation enabled
1.503557: wlan0 (phy #0): scan aborted: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5720 5745 5765 5785 5805 5825, ""
0.186036: wlan0: new station 9c:c7:a6:57:f9:52
0.004277: wlan0 (phy #0): auth 9c:c7:a6:57:f9:52 -> 94:e9:79:ab:0a:fd status: 0: Successful [frame: b0 00 3a 01 94 e9 79 ab 0a fd 9c c7 a6 57 f9 52 9c c7 a6 57 f9 52 00 10 00 00 02 00 00 00]
0.010643: wlan0 (phy #0): assoc 9c:c7:a6:57:f9:52 -> 94:e9:79:ab:0a:fd status: 0: Successful [frame: 10 00 3a 01 94 e9 79 ab 0a fd 9c c7 a6 57 f9 52 9c c7 a6 57 f9 52 20 10 31 04 00 00 02 c0 01 08 82 84 8b 0c 12 96 18 24 32 04 30 48 60 6c 2d 1a ee 11 1b ff ff 00 00 00 00 00 00 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 33 1a ee 11 1b ff ff 00 00 00 00 00 00 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 3d 16 01 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 34 16 01 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4a 0e 14 00 0a 00 2c 01 c8 00 14 00 05 00 19 00 7f 05 01 00 00 00 00 dd 18 00 50 f2 02 01 01 02 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00]
0.000067: wlan0 (phy #0): connected to 9c:c7:a6:57:f9:52
0.003956: phy #0: regulatory domain change: set to DE by a country IE request on phy0
0.897179: wlan0 (phy #0): scan started
6.414216: wlan0 (phy #0): scan finished: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785 5805 5825, ""
36.586833: wlan0 (phy #0): scan started
^C
Jana66 hat geschrieben:
Ich empfehle dir das Programm linssid für Kanalplanung/Übersicht. Ist nicht in Paketquellen.
Des Weiteren könntest du später, wenn alles läuft, am Router 802.11n für 2,4 GHz einstellen sowie aufgrund der vielen WLANs auf 5 GHz 802.11n oder ac umsteigen bzw. zusätzlich nutzen. 5 GHz hat eine viel geringere Reichweite aufgrund höherer Dämpfung.
Das scheinen mir im Augenblick die entscheidenden Ratschläge zu sein, die ich mal heute Abend ausprobieren werde.
LinSSID hab ich mir mal runter geladen