ich bekomme den Medion MD90093 nicht zum laufen, ich habe es schon mit dem Treiber von hier probiert, damit findet zumindest sane-find-scanner etwas. Weiß jemand, wie man das Teil zum Laufen bekommt?
Code: Alles auswählen
# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x05da [Prolific Technology Inc.], product=0x3025 [USB Scanner ], chip=SQ113) at libusb:001:003
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
Code: Alles auswählen
# scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
Code: Alles auswählen
# lsusb
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 13fe:4100 Kingston Technology Company Inc. Flash drive
Bus 001 Device 003: ID 05da:3025 Microtek International, Inc.
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Vielen Dank & Viele Grüße,
Frink