Es ist längere Zeit her als ich das letzte Mal etwas eingescannt hatte. Aber damals hatte es funktioniert. Ich kann leider nicht sagen, was seitdem am System alles geändert wurde.
Code: Alles auswählen
r@XS35:~$ groups
r cdrom floppy sudo audio dip video plugdev netdev lpadmin scanner
r@XS35:~$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x03f0 [HP], product=0x5611 [Photosmart C3100 series]) at libusb:002:004
could not open USB device 0x1d6b/0x0002 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 005:001: Access denied (insufficient permissions)
could not open USB device 0x090c/0x1000 at 004:004: Access denied (insufficient permissions)
could not open USB device 0x413c/0x2011 at 004:003: Access denied (insufficient permissions)
could not open USB device 0x413c/0x1005 at 004:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 004:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 003:001: Access denied (insufficient permissions)
could not open USB device 0x0461/0x4d22 at 001:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 001:001: Access denied (insufficient permissions)
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
r@XS35:~$ scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).