nach einen Update wird meine Scanner nicht mehr erkannt.
Nach Eingabe von (lsusb) wird der Scanner zwar erkannt ...
find-sane-scanner ergibtBus 002 Device 009: ID 04a9:220d Canon, Inc. CanoScan N670U/N676U/LiDE 20
... jedoch mein Scanner - Programm ( simple-scan ) erkennt den Scanner nicht# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04a9 [Canon], product=0x220d [CanoScan], chip=LM9832/3) at libusb:002:009
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
an der Konfiguration habe ich nichts verändert.
Freue mich auf Lösungsvorschläge