Guten Tag,
ich habe einen Raspberry 3B mit OMV und eine 2TB Festplatte mit NTFS-Dateisystem. Auf der Festplatte ist ein Tauschverzeichnis und ein Ordner mit Filmen, die ich auf meinen FireTv mit Kodi streamen möchte.
Theoretisch funktioniert alles, wenn die Festplatte nicht in den Standby (oder so ähnlich?!) gehen würde. Wenn ich die Festplatte frisch anschließe funktioniert sie wunderbar, bis sie mal eine Zeit lang nicht mehr gebraucht wird.
Dann ist sie nicht mehr erreichbar bzw die Ordner sind noch vorhanden die ich in OMV freigegeben habe aber alles was darin liegt ist weg, so als würde die Festplatte nicht im Raspberry stecken. Weder von Kodi aus, noch vom PC (Windows 10) aus, noch vom Androidsmartphone aus.
Was kann ich machen damit die Festplatte vom Raspberry geweckt wird, wenn ich aus dem Netzwerk darauf zugreifen will?
Danke schonmal für die Hilfe.
Gruß Mustache
OMV auf Raspberry 3B (NTFS Festplatte) Dateien verschwinden
-
- Beiträge: 6
- Registriert: 07.04.2017 13:48:57
Re: OMV auf Raspberry 3B (NTFS Festplatte) Dateien verschwin
Wie ist denn die Festplatte angebunden und warum is da NTFS drauf?
Georg
RTFM, LMGTFY, Orakel... Ach... Warum muss man suchen...
Schrödingers Backup --- "Der Zustand eines Backups ist unbekannt, solange man es nicht wiederherstellt" --- Quelle: Nixcraft
RTFM, LMGTFY, Orakel... Ach... Warum muss man suchen...
Schrödingers Backup --- "Der Zustand eines Backups ist unbekannt, solange man es nicht wiederherstellt" --- Quelle: Nixcraft
-
- Beiträge: 6
- Registriert: 07.04.2017 13:48:57
Re: OMV auf Raspberry 3B (NTFS Festplatte) Dateien verschwin
Die Festplatte kommt von einem Windows Rechner deshalb ist NTFS drauf. Könnte das der Fehler sein? Die Festplatte steckt per USB dran.gbotti hat geschrieben:Wie ist denn die Festplatte angebunden und warum is da NTFS drauf?
Re: OMV auf Raspberry 3B (NTFS Festplatte) Dateien verschwin
Naja. Das mit dem Standby eher nicht, ich gehe davon aus dass die NTFS-Software Probleme bereitet. NTFS ist nichts was ich unter Linux benutzen würde.
- Steht denn irgendwas in den Logfiles unter /var/log?
- Mit welchen Kommandos mountest du die NTFS-Platte?
- Reicht die Stromversorgung über USB aus um die Platte zu betreiben?
- Steht denn irgendwas in den Logfiles unter /var/log?
- Mit welchen Kommandos mountest du die NTFS-Platte?
- Reicht die Stromversorgung über USB aus um die Platte zu betreiben?
Georg
RTFM, LMGTFY, Orakel... Ach... Warum muss man suchen...
Schrödingers Backup --- "Der Zustand eines Backups ist unbekannt, solange man es nicht wiederherstellt" --- Quelle: Nixcraft
RTFM, LMGTFY, Orakel... Ach... Warum muss man suchen...
Schrödingers Backup --- "Der Zustand eines Backups ist unbekannt, solange man es nicht wiederherstellt" --- Quelle: Nixcraft
-
- Beiträge: 6
- Registriert: 07.04.2017 13:48:57
Re: OMV auf Raspberry 3B (NTFS Festplatte) Dateien verschwin
Bei OMV ganz normal eingebunden in das System da ist OMV ja recht Pflegeleicht. Es ist eine 3.5" Festplatte. Hat also eine Externe Stromversorgung
Re: OMV auf Raspberry 3B (NTFS Festplatte) Dateien verschwin
Was sagt den hdparm?
-
- Beiträge: 6
- Registriert: 07.04.2017 13:48:57
Re: OMV auf Raspberry 3B (NTFS Festplatte) Dateien verschwin
ich musste jetzt erstmal googlen was hdparm ist. Wenn ich hdparm /dev/sda eingebe kommt folgendes:
root@schmidtnas:~# hdparm /dev/sda
/dev/sda:
multcount = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 243073/255/63, sectors = 3904981168, start = 0
root@schmidtnas:~#
root@schmidtnas:~# multcount = 0 (off)
-bash: syntax error near unexpected token `('
root@schmidtnas:~# readonly = 0 (off)
-bash: syntax error near unexpected token `('
root@schmidtnas:~# readahead = 256 (on)
-bash: syntax error near unexpected token `('
root@schmidtnas:~# geometry = 243073/255/63, sectors = 3904981168, start = 0
-bash: geometry: command not found
root@schmidtnas:~#
root@schmidtnas:~# root@schmidtnas:~# hdparm /dev/sda
-bash: syntax error near unexpected token `('
root@schmidtnas:~# readonly = 0 (off)
-bash: syntax error near unexpected token `('
root@schmidtnas:~# readahead = 256 (on)
-bash: syntax error near unexpected token `('
root@schmidtnas:~# geometry = 243073/255/63, sectors = 3904981168, start = 0
-bash: root@schmidtnas:~#: command not found
root@schmidtnas:~#
root@schmidtnas:~# /dev/sda:
-bash: /dev/sda:: No such file or directory
root@schmidtnas:~# multcount = 0 (off)
-bash: syntax error near unexpected token `('
root@schmidtnas:~# readonly = 0 (off)
-bash: syntax error near unexpected token `('
root@schmidtnas:~# readahead = 256 (on)
-bash: syntax error near unexpected token `('
root@schmidtnas:~# geometry = 243073/255/63, sectors = 3904981168, start = 0
-bash: geometry: command not found
root@schmidtnas:~# root@schmidtnas:~#
-bash: root@schmidtnas:~#: command not found
root@schmidtnas:~# root@schmidtnas:~# multcount = 0 (off)
-bash: syntax error near unexpected token `('
root@schmidtnas:~# -bash: syntax error near unexpected token `('
> root@schmidtnas:~# readonly = 0 (off)
> -bash: syntax error near unexpected token `('
-bash: syntax error near unexpected token `('
root@schmidtnas:~# root@schmidtnas:~# readahead = 256 (on)
-bash: syntax error near unexpected token `('
root@schmidtnas:~# -bash: syntax error near unexpected token `('
> root@schmidtnas:~# geometry = 243073/255/63, sectors = 3904981168, start = 0
root@schmidtnas:~# hdparm /dev/sda
/dev/sda:
multcount = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 243073/255/63, sectors = 3904981168, start = 0
root@schmidtnas:~#
root@schmidtnas:~# multcount = 0 (off)
-bash: syntax error near unexpected token `('
root@schmidtnas:~# readonly = 0 (off)
-bash: syntax error near unexpected token `('
root@schmidtnas:~# readahead = 256 (on)
-bash: syntax error near unexpected token `('
root@schmidtnas:~# geometry = 243073/255/63, sectors = 3904981168, start = 0
-bash: geometry: command not found
root@schmidtnas:~#
root@schmidtnas:~# root@schmidtnas:~# hdparm /dev/sda
-bash: syntax error near unexpected token `('
root@schmidtnas:~# readonly = 0 (off)
-bash: syntax error near unexpected token `('
root@schmidtnas:~# readahead = 256 (on)
-bash: syntax error near unexpected token `('
root@schmidtnas:~# geometry = 243073/255/63, sectors = 3904981168, start = 0
-bash: root@schmidtnas:~#: command not found
root@schmidtnas:~#
root@schmidtnas:~# /dev/sda:
-bash: /dev/sda:: No such file or directory
root@schmidtnas:~# multcount = 0 (off)
-bash: syntax error near unexpected token `('
root@schmidtnas:~# readonly = 0 (off)
-bash: syntax error near unexpected token `('
root@schmidtnas:~# readahead = 256 (on)
-bash: syntax error near unexpected token `('
root@schmidtnas:~# geometry = 243073/255/63, sectors = 3904981168, start = 0
-bash: geometry: command not found
root@schmidtnas:~# root@schmidtnas:~#
-bash: root@schmidtnas:~#: command not found
root@schmidtnas:~# root@schmidtnas:~# multcount = 0 (off)
-bash: syntax error near unexpected token `('
root@schmidtnas:~# -bash: syntax error near unexpected token `('
> root@schmidtnas:~# readonly = 0 (off)
> -bash: syntax error near unexpected token `('
-bash: syntax error near unexpected token `('
root@schmidtnas:~# root@schmidtnas:~# readahead = 256 (on)
-bash: syntax error near unexpected token `('
root@schmidtnas:~# -bash: syntax error near unexpected token `('
> root@schmidtnas:~# geometry = 243073/255/63, sectors = 3904981168, start = 0
Zuletzt geändert von TheMustache am 09.04.2017 11:24:43, insgesamt 1-mal geändert.
-
- Beiträge: 6
- Registriert: 07.04.2017 13:48:57
Re: OMV auf Raspberry 3B (NTFS Festplatte) Dateien verschwin
Ich habe jetzt die festplatte auf EXT4 formatiert und alle Datein über nacht auf die Festplatte kopieren lassen. Trotzdem geht die Festplatte aus und ist nicht erreichbar. Wenn ich die Festplatte anfassen merk ich aber, dass sie sich dreht also an ist.
Jetzt ist die Festplatte wieder nicht erreichbar und OMV bringt jetzt folgende Meldung wenn ich versuche etwas einzustellen an den Ordnern die auf der Festplatte sind:
Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C; blkid -p -o full '/dev/sda1' 2>&1' with exit code
Jetzt ist die Festplatte wieder nicht erreichbar und OMV bringt jetzt folgende Meldung wenn ich versuche etwas einzustellen an den Ordnern die auf der Festplatte sind:
Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C; blkid -p -o full '/dev/sda1' 2>&1' with exit code