habe eigentlich recht erfolgreich auf meinen Laptop (Dell Latitude E7470) Debian installiert bekommen.
Aber ich habe beim Start das Problem dass es seeehr lange dauert bis meine USB Devices "nutzbar" sind. Beispiel: Ich habe USB Maus und Tastatur über den USB-Hub im Monitor angeschlossen. Nachdem der Login-Screen da ist, muss ich noch ne Minute oder so warten bis USB Maus und Tastatur funktioniert. Die Laptoptastatur und Touchpad hingegen funktionieren sofort.
dmesg liefert mir ständig und mehr oder weniger permanent auch folgende Meldung:
Dabei iste s völlig egal ob ich ein USB Gerät oder kein einziges USB Gerät angeschlossen habe. Macht auch kein Unterschied ob eine SD-Karte im eingebauten SD-Kartenleser steckt oder nicht. Die Meldung kommt einfach unabhängig davon wie ich den Laptop benutze. Ein Muster ist mir noch nciht aufgefallen.[ 2739.893008] usb usb2-port5: Cannot enable. Maybe the USB cable is bad?
lsbusb sagt:
Code: Alles auswählen
Bus 002 Device 004: ID 05e3:0620 Genesys Logic, Inc.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 8087:0a2b Intel Corp.
Bus 001 Device 004: ID 0a5c:5834 Broadcom Corp.
Bus 001 Device 013: ID 045e:00cb Microsoft Corp. Basic Optical Mouse v2.0
Bus 001 Device 012: ID 046a:0023 Cherry GmbH CyMotion Master Linux Keyboard G230
Bus 001 Device 011: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 002: ID 0bda:57c3 Realtek Semiconductor Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
40612
"lsusb -t" sagte
Code: Alles auswählen
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
|__ Port 3: Dev 4, If 0, Class=Hub, Driver=hub/4p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M
|__ Port 1: Dev 14, If 3, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 1: Dev 14, If 1, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 1: Dev 14, If 2, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 1: Dev 14, If 0, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 2: Dev 2, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 2: Dev 2, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 3: Dev 11, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 2: Dev 12, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 12, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 3: Dev 13, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 7: Dev 4, If 0, Class=Application Specific Interface, Driver=, 12M
|__ Port 7: Dev 4, If 1, Class=Chip/SmartCard, Driver=, 12M
|__ Port 7: Dev 4, If 2, Class=Chip/SmartCard, Driver=, 12M
|__ Port 7: Dev 4, If 3, Class=Vendor Specific Class, Driver=, 12M
|__ Port 8: Dev 6, If 1, Class=Wireless, Driver=btusb, 12M
|__ Port 8: Dev 6, If 0, Class=Wireless, Driver=btusb, 12M
Hat jemand ein Idee an was das liegt, oder wo ich noch schauen könnte?
Bin etwas ratlos. Kein Plan was an usb2-port5 für ein Gerät hängen sollte und Probleme macht.
Kaputtes, eingestecktes USB Kabel kann ich ausschließen, denn wie gesagt, die Meldung kommt auch, wenn ich nichts anschließe.
Gruß
Alex
P.S. ist ein Debian Testing (Linux p1593-debian 4.19.0-2-amd64 #1 SMP Debian 4.19.16-1 (2019-01-17) x86_64 GNU/Linux)