hdparm -t liefert mir ca 100MB/sec, skippe ich aber vor per
dd if=/dev/sdd of=/dev/null bs=1M count=1 skip=1000
kommen zum Teil nur noch 7kB / sec und es dauert entsprechend länger.
Aufgefallen ist mir das nur, weil das Backup mit dieser Platte nicht fertig wurde.
Jetzt die Frage : woran könnte das liegen?
Die Smartparameter im Plattenvergleich sehen jedenfalls unverdächtig aus (rechts ist kaputt):
Code: Alles auswählen
Model Family: Western Digital Elements / My Passport | Model Family: Western Digital Elements / My Passport
Device Model: WDC WD20NMVW-11AV3S2 | Device Model: WDC WD20NMVW-11AV3S2
1 Raw_Read_Error_Rate 0x002f 200 200 051 | 1 Raw_Read_Error_Rate 0x002f 135 135 051 Pre
3 Spin_Up_Time 0x0027 189 186 021 | 3 Spin_Up_Time 0x0027 193 188 021 Pre
4 Start_Stop_Count 0x0032 100 100 000 | 4 Start_Stop_Count 0x0032 100 100 000 Old
5 Reallocated_Sector_Ct 0x0033 200 200 140 | 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre
7 Seek_Error_Rate 0x002e 200 200 000 | 7 Seek_Error_Rate 0x002e 200 200 000 Old
9 Power_On_Hours 0x0032 100 100 000 | 9 Power_On_Hours 0x0032 100 100 000 Old
10 Spin_Retry_Count 0x0032 100 100 000 | 10 Spin_Retry_Count 0x0032 100 253 000 Old
11 Calibration_Retry_Count 0x0032 100 253 000 | 11 Calibration_Retry_Count 0x0032 100 253 000 Old
12 Power_Cycle_Count 0x0032 100 100 000 | 12 Power_Cycle_Count 0x0032 100 100 000 Old
192 Power-Off_Retract_Count 0x0032 200 200 000 | 192 Power-Off_Retract_Count 0x0032 200 200 000 Old
193 Load_Cycle_Count 0x0032 200 200 000 | 193 Load_Cycle_Count 0x0032 200 200 000 Old
194 Temperature_Celsius 0x0022 133 106 000 | 194 Temperature_Celsius 0x0022 132 099 000 Old
Gruß,
weedy