[gelöst] NAS geht offline

Einrichten des lokalen Netzes, Verbindung zu anderen Computern und Diensten.
Antworten
Benutzeravatar
Draal
Beiträge: 531
Registriert: 11.03.2005 14:45:26

[gelöst] NAS geht offline

Beitrag von Draal » 07.11.2022 15:54:25

Hallo,

ich betreibe ein NAS seit Jahrzehnten. Nun ist es offline gegangen. Offenbar wird die Netzwerkkarte nicht mehr richtig angesprochen. Ich habe das System heruntergefahren und die Hardware gereinigt. lspci hat die relativ neue Netzwerkkarte nicht mehr aufgeführt. Nach der Säuberung wurde die Netzwerkkarte auf einen anderen PCI Slot gesteckt, das System gestartet und lspci gab folgende Meldung:

Code: Alles auswählen

00:00.0 RAM memory: NVIDIA Corporation MCP61 Host Bridge (rev a1)
00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3)
00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3)
00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1)
00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2)
00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
01:0a.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
Danach wird die Karte erkannt, jedoch scheint sie nicht zu funktionieren. Die Maschine kann nichts anpingen und ist auch nicht erreichbar.

Vielleicht hat jemand eine Idee, oder ist die Netzwerkkarte hin? 8O
Zuletzt geändert von Draal am 07.11.2022 16:33:52, insgesamt 1-mal geändert.

Benutzeravatar
debilian
Beiträge: 1192
Registriert: 21.05.2004 14:03:04
Wohnort: 192.168.43.7
Kontaktdaten:

Re: NAS geht offline

Beitrag von debilian » 07.11.2022 16:06:33

Kabel gut?
-- nichts bewegt Sie wie ein GNU --

Benutzeravatar
Draal
Beiträge: 531
Registriert: 11.03.2005 14:45:26

Re: NAS geht offline

Beitrag von Draal » 07.11.2022 16:33:26

Ja, da hab ich natürlich gleich nachgesehen. Wieso die Karte 'eingeschlafen' ist, kann ich natürlich nicht sagen. Indes brachte mich ifconfig -a auf die Spur. So wie es aussieht, erhielt sie durch das Umstecken eine neue Bezeichnung. Diese musste ich dann in /etc/network/interfaces anpassen. Manchmal sieht man den Wald vor lauter Bäumen nicht und man wird ja auch nicht jünger. :wink:

Antworten