ich bräuchte mal Unterstützung. Einer meiner beiden PCs ist für kdeconnect nicht erreichbar.
Situation:
/24 Netz, in dem folgende Beteiligte vorhanden sind. Es sind 2x Debian testing und 1x Android Smartphone. Die Version von kdeconnect ist auf beiden PCs 22.12.3-1.
2 PCs
PC1 192.168.150.102 (LAN)
PC2 192.168.150.159 (WLAN)
Smartphone 192.168.150.12 (Android, WLAN)
Zwischen PC1 und Smartphone funktioniert kdeconnect hervorragend.
Zwischen PC2 und Smartphone funktioniert kdeconnect nicht.
Netzwerk-Infos PC1:
Code: Alles auswählen
# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether xx:xx:xx:xx:xx:7f brd ff:ff:ff:ff:ff:ff
inet 192.168.150.102/24 brd 192.168.150.255 scope global dynamic noprefixroute enp3s0
valid_lft 85744sec preferred_lft 85744sec
# /sbin/route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.150.1 0.0.0.0 UG 100 0 0 enp3s0
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 enp3s0
192.168.xxx.0 0.0.0.0 255.255.255.0 U 100 0 0 enp3s0
# iptables -L -n
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Code: Alles auswählen
# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: wlp6s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether xx:xx:xx:xx:xx:eb brd ff:ff:ff:ff:ff:ff
inet 192.168.150.159/24 brd 192.168.xxx.255 scope global dynamic noprefixroute wlp6s0
valid_lft 84282sec preferred_lft 84282sec
# route -n
Kernel-IP-Routentabelle
Ziel Router Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.150.1 0.0.0.0 UG 600 0 0 wlp6s0
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlp6s0
192.168.150.0 0.0.0.0 255.255.255.0 U 600 0 0 wlp6s0
# iptables -L -n
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Code: Alles auswählen
$ nc -v 192.168.150.12 1716
smartphone [192.168.150.12] 1716 (?) open
$ nc -v 192.168.150.102 1716
PC1 [192.168.150.102] 1716 (?) open
$ nc -v 192.168.150.159 1716
PC2 [192.168.150.159] 1716 (?) : No route to host
Verbindungsversuche von PC2:
Code: Alles auswählen
$ nc -v 192.168.150.12 1716
Connection to 192.168.150.12 1716 port [tcp/*] succeeded!
$ nc -v 192.168.150.159 1716
Connection to 192.168.150.159 1716 port [tcp/*] succeeded!
$ nc -v 192.168.150.102 1716
Connection to 192.168.150.102 1716 port [tcp/*] succeeded!
Daher hier meine Bitte um Hilfe.
Viele Grüße,
Jochen