ich brauche eure Hilfe. In meinem Laptop sind 2 Grafik Einheiten verbaut.
Wie kann ich im laufenden Betrieb zwischen diesen Umschalten ?
Laptop: HP Notebook – 17-ak013ng
Code: Alles auswählen
System:
Kernel: 6.1.0-17-amd64 arch: x86_64 bits: 64 Desktop: MATE v: 1.26.0
Distro: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Laptop System: HP product: HP Laptop 17-ak0xx v: Type1ProductConfigId
serial: <filter>
Mobo: HP model: 8347 v: 42.21 serial: <filter> UEFI: Insyde v: F.14
date: 06/10/2020
CPU:
Info: quad core model: AMD A10-9620P RADEON R5 10 COMPUTE CORES 4C+6G
bits: 64 type: MT MCP cache: L2: 2 MiB
Speed (MHz): avg: 1500 min/max: 1300/2500 cores: 1: 1300 2: 1300 3: 2100
4: 1300
Graphics:
Device-1: AMD Wani [Radeon R5/R6/R7 Graphics] driver: amdgpu v: kernel
Device-2: AMD Topaz XT [Radeon R7 M260/M265 / M340/M360 M440/M445 530/535
620/625 Mobile] driver: amdgpu v: kernel
Device-3: Chicony HP TrueVision HD Camera type: USB driver: uvcvideo
Display: x11 server: X.Org v: 1.21.1.7 driver: X: loaded: amdgpu
unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu
resolution: 1920x1080~60Hz
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: AMD Radeon R5 Graphics (carrizo
LLVM 15.0.6 DRM 3.49 6.1.0-17-amd64)
Audio:
Device-1: AMD Kabini HDMI/DP Audio driver: snd_hda_intel
Device-2: AMD Family 15h Audio driver: snd_hda_intel
API: ALSA v: k6.1.0-17-amd64 status: kernel-api
Server-1: PulseAudio v: 16.1 status: active (root, process)
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
driver: r8169
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Realtek RTL8723DE 802.11b/g/n PCIe Adapter driver: rtw_8723de
IF: wlo1 state: down mac: <filter>
Bluetooth:
Device-1: Realtek Bluetooth 4.2 Adapter type: USB driver: btusb
Report: hciconfig ID: hci0 rfk-id: 1 state: down
bt-service: enabled,running rfk-block: hardware: no software: yes
address: <filter>
Drives:
Local Storage: total: 352.13 GiB used: 113.25 GiB (32.2%)
ID-1: /dev/sda vendor: SanDisk model: SD8SN8U-128G-1006 size: 119.24 GiB
ID-2: /dev/sdb vendor: Intenso model: SSD Sata III size: 232.89 GiB
Partition:
ID-1: / size: 114.24 GiB used: 9.44 GiB (8.3%) fs: btrfs dev: /dev/sda2
ID-2: /boot/efi size: 239.2 MiB used: 5.8 MiB (2.4%) fs: vfat
dev: /dev/sda1
ID-3: /home size: 215.93 GiB used: 103.81 GiB (48.1%) fs: btrfs
dev: /dev/sdb1
Swap:
ID-1: swap-1 type: partition size: 7.63 GiB used: 0 KiB (0.0%)
dev: /dev/sdb2
Sensors:
System Temperatures: cpu: 40.6 C mobo: N/A
Fan Speeds (RPM): N/A
GPU: device: amdgpu temp: 39.0 C device: amdgpu temp: 37.0 C
Info:
Processes: 270 Uptime: 56m Memory: 7.23 GiB used: 2.67 GiB (36.9%)
Shell: Bash inxi: 3.3.26 
