Code: Alles auswählen
ldap_url_parse_ext(ldaps://auth.domain.de)
ldap_create
ldap_url_parse_ext(ldaps://auth.domain.de:636/??base)
Enter LDAP Password:
ldap_sasl_bind
ldap_send_initial_request
ldap_new_connection 1 1 0
ldap_int_open_connection
ldap_connect_to_host: TCP auth.domain.de:636
ldap_new_socket: 3
ldap_prepare_socket: 3
ldap_connect_to_host: Trying xxx.xxx.xxx.xxx:636
ldap_pvt_connect: fd: 3 tm: -1 async: 0
attempting to connect:
connect success
TLS: peer cert untrusted or revoked (0x42)
TLS: can't connect: (unknown error code).
ldap_err2string
ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1)Code: Alles auswählen
smbldap_search_domain_info: Adding domain info for TS failed with NT_STATUS_UNSUCCESSFUL
pdb_init_ldapsam: WARNING: Could not get domain info, nor add one to the domain. We cannot work reliably without it.
pdb backend ldapsam:ldap://auth.domain.de did not correctly init (error was NT_STATUS_CANT_ACCESS_DOMAIN_INFO)
WARNING: Could not open passdbCode: Alles auswählen
[2021/09/08 10:45:18.943528, 2] ../../source3/lib/interface.c:343(add_interface)
added interface eth0 ip=134.130.104.115 bcast=134.130.104.127 netmask=255.255.255.240
[2021/09/08 10:45:18.943578, 3] ../../source3/smbd/server.c:1858(main)
loaded services
[2021/09/08 10:45:18.943679, 1] ../../source3/profile/profile_dummy.c:30(set_profile_level)
INFO: Profiling support unavailable in this build.
[2021/09/08 10:45:18.943711, 3] ../../source3/smbd/server.c:1877(main)
Standard input is not a socket, assuming -D option
[2021/09/08 10:45:18.943736, 3] ../../source3/smbd/server.c:1890(main)
Becoming a daemon.
[2021/09/08 10:45:18.944041, 2] ../../source3/lib/tallocmsg.c:84(register_msg_pool_usage)
Registered MSG_REQ_POOL_USAGE
[2021/09/08 10:45:18.944202, 2] ../../source3/passdb/pdb_ldap_util.c:281(smbldap_search_domain_info)
smbldap_search_domain_info: Searching for:[(&(objectClass=sambaDomain)(sambaDomainName=TS))]
[2021/09/08 10:45:18.964276, 2] ../../source3/lib/smbldap.c:847(smbldap_open_connection)
smbldap_open_connection: connection opened
[2021/09/08 10:45:18.979546, 3] ../../source3/lib/smbldap.c:1069(smbldap_connect_system)
ldap_connect_system: successful connection to the LDAP server
[2021/09/08 10:45:18.980145, 3] ../../source3/passdb/pdb_ldap_util.c:306(smbldap_search_domain_info)
smbldap_search_domain_info: Got no domain info entries for domain
[2021/09/08 10:45:18.980677, 3] ../../source3/passdb/pdb_ldap_util.c:168(add_new_domain_info)
add_new_domain_info: Adding new domain
[2021/09/08 10:45:18.981448, 1] ../../source3/passdb/pdb_ldap_util.c:235(add_new_domain_info)
add_new_domain_info: failed to add domain dn= sambaDomainName=TS,dc=domain,dc=de with: Invalid DN syntax
invalid DN
[2021/09/08 10:45:18.981511, 0] ../../source3/passdb/pdb_ldap_util.c:313(smbldap_search_domain_info)
smbldap_search_domain_info: Adding domain info for TS failed with NT_STATUS_UNSUCCESSFUL
[2021/09/08 10:45:18.981581, 0] ../../source3/passdb/pdb_ldap.c:6751(pdb_ldapsam_init_common)
pdb_init_ldapsam: WARNING: Could not get domain info, nor add one to the domain. We cannot work reliably without it.
[2021/09/08 10:45:18.981616, 0] ../../source3/passdb/pdb_interface.c:179(make_pdb_method_name)
pdb backend ldapsam:ldaps://auth.domain.de did not correctly init (error was NT_STATUS_CANT_ACCESS_DOMAIN_INFO)Code: Alles auswählen
#======================= Global Settings =======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
# wins support = no
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
#; wins server = w.x.y.z
# This will prevent nmbd to search for NetBIOS names through DNS.
# dns proxy = no
#### Networking ####
# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
# interfaces = eth0 lo
; interfaces = 127.0.0.0/8 eth0 lo
# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes
hosts deny = 0.0.0.0/0
hosts allow = xxx.xxx.0.0/16 xxx.xxx.0.0/16 xxx.xxx.0.0/16 xxx.xxx.xxx.0/24
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
log level = 3
# Cap the size of the individual log files (in KiB).
max log size = 1000
# We want Samba to only log to /var/log/samba/log.{smbd,nmbd}.
# Append syslog@1 if you want important messages to be sent to syslog too.
logging = file
# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d
# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
# syslog only = no
# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
# syslog = 0
# Do something sensible when Samba crashes: mail the admin a backtrace
# panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
server role = standalone server
# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
# passdb backend = plaintext
security = user
# passdb backend = plaintext
# passdb backend = ldapsam:ldaps://auth.domain.de
passdb backend = ldapsam:ldap://auth.domain.de
ldap suffix = dc=domain,dc=de
ldap user suffix = ou=people
ldap group suffix = ou=groups
ldap machine suffix = ou=machines
ldap idmap suffix = ou=Idmap
ldap admin dn = cn=admin,dc=domain,dc=de
ldap ssl = off
ldap passwd sync = yes
obey pam restrictions = yes
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = no
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes
# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user
########## Domains ###########
#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#
# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U
# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd
# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g
############ Misc ############
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash
# Setup usershare options to enable non-root users to share folders
# with the net usershare command.
# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100
# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes
#======================= Share Definitions =======================
[homes]
comment = Home Directories
browseable = no
# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
read only = no
# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
create mask = 0700
# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
directory mask = 0700
# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# The following parameter makes sure that only "username" can connect
# to \\server\username
# This might need tweaking when using external authentication schemes
valid users = %S
# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes
# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700
[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
guest ok = no
read only = yes
create mask = 0700
# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
; write list = root, @lpadmin
[scan-inbox]
comment = Scan Inbox
read only = no
browsable = yes
guest ok = no
path = /shares/scan-inbox
[fsr]
comment = FS-Daten
read only = no
browsable = yes
guest ok = no
path = /home/fsr
[home]
comment = Home-Verzeichnisse
read only = no
browsable = yes
guest ok = no
path = /home
