beim prüfen mit smartctl zeigt eine meiner SSDs Fehler an.
Da ich ein Dualbootsystem (Debian testing / Windows 11) nutze, konnte ich die SSD mit Cristaldiskinfo prüfen. Laut Cristaldiskinfo ist die SSD fehlerfrei!
Was haltet ihr davon?
Code: Alles auswählen
smartctl -x /dev/nvme0
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-5-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: Samsung SSD 970 EVO Plus 500GB
Serial Number: S4EVNJ0N213955L
Firmware Version: 2B2QEXM7
PCI Vendor/Subsystem ID: 0x144d
IEEE OUI Identifier: 0x002538
Total NVM Capacity: 500.107.862.016 [500 GB]
Unallocated NVM Capacity: 0
Controller ID: 4
NVMe Version: 1.3
Number of Namespaces: 1
Namespace 1 Size/Capacity: 500.107.862.016 [500 GB]
Namespace 1 Utilization: 149.075.353.600 [149 GB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 002538 520140ef7c
Local Time is: Thu Mar 9 23:48:26 2023 CET
Firmware Updates (0x16): 3 Slots, no Reset required
Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp
Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg
Maximum Data Transfer Size: 512 Pages
Warning Comp. Temp. Threshold: 85 Celsius
Critical Comp. Temp. Threshold: 85 Celsius
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 7.80W - - 0 0 0 0 0 0
1 + 6.00W - - 1 1 1 1 0 0
2 + 3.40W - - 2 2 2 2 0 0
3 - 0.0700W - - 3 3 3 3 210 1200
4 - 0.0100W - - 4 4 4 4 2000 8000
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 0
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 40 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 0%
Data Units Read: 30.888.817 [15,8 TB]
Data Units Written: 14.285.336 [7,31 TB]
Host Read Commands: 348.716.378
Host Write Commands: 206.232.247
Controller Busy Time: 737
Power Cycles: 1.939
Power On Hours: 873
Unsafe Shutdowns: 231
Media and Data Integrity Errors: 0
Error Information Log Entries: 9.724
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 1: 40 Celsius
Temperature Sensor 2: 34 Celsius
Error Information (NVMe Log 0x01, 16 of 64 entries)
Num ErrCount SQId CmdId Status PELoc LBA NSID VS
0 9724 0 0x0004 0x4004 - 0 0 -
