[vorerst erledigt] Greenscreen bei Acer Monitor und Ideacentre 510-15abr

KDE, Gnome, Windowmanager, X11, Grafiktreiber und alles was dazu notwendig ist. Schau auch in den "Tipps und Tricks"-Bereich.
Antworten
rwkraemer
Beiträge: 398
Registriert: 14.08.2005 23:23:40

[vorerst erledigt] Greenscreen bei Acer Monitor und Ideacentre 510-15abr

Beitrag von rwkraemer » 09.07.2023 22:40:17

Hallo,

mein alter Lenovo Ideacentre macht zur Zeit Probleme. Vor 5 Jahren habe ich ihn zusammen mit einem sehr preisgünstigen Acer Monitor (24'') gekauft. Das System ist Bookworm, der PC hat einen AMD-A10 CPU und eine integrierte Radeon R7 Grafik. Seit dem letzten Kernel-Update auf 6.1.0-10 habe ich einen Greenscreen kurz nach dem Login. Das Phänomen tritt sowohl bei XFCE als auch bei KDE auf. Es ist egal ob Lightdm oder Sddm benutzt wird. Wenn ich den vorherigen Kernel benutze, läuft die Maschine, allerdings hatte ich da einmal einen Blackscreen, meist kann ich aber mit dem PC arbeiten.

Ich schreibe gerade von meinem Notebook, daher noch keine Logs. Die reiche ich bei Gelegenheit nach. Aber eine Durchsicht der xorg-logs und journalctl hat noch kein Ergebnis gebracht, also kein Kernel-Panik oder ähnliches. Bisher startet der PC nach dem Greenscreen von selber neu. Irgendwie befürchte ich, es ist der Monitor, der hat damals neu nur 99 Euro gekostet, das wird wohl seinen Grund gehabt haben. Die Kabel am Monitor sitzen jedenfalls einigermaßen fest.

Edit: Da einige Lenovo-Geräte offenbar mit fwupd kooperieren, habe ich damit ein wenig gespielt, aber das Programm gibt nur aus, dass alles up-to-date ist. Die Bios Version ist auch die neuste (2019).
Zuletzt geändert von rwkraemer am 13.07.2023 20:16:43, insgesamt 1-mal geändert.

rwkraemer
Beiträge: 398
Registriert: 14.08.2005 23:23:40

Re: Greenscreen bei Acer Monitor und Ideacentre 510-15abr

Beitrag von rwkraemer » 10.07.2023 17:26:10

xsession-error.old:

Code: Alles auswählen

Xsession: X session started for rainer at Sa 8. Jul 17:32:29 CEST 2023
dbus-update-activation-environment: setting DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
dbus-update-activation-environment: setting DISPLAY=:0
dbus-update-activation-environment: setting XAUTHORITY=/home/rainer/.Xauthority
localuser:rainer being added to access control list
dbus-update-activation-environment: setting XDG_DATA_DIRS=/usr/share/xfce4:/usr/local/share/:/usr/share/
dbus-update-activation-environment: setting GTK_MODULES=gail:atk-bridge
dbus-update-activation-environment: setting QT_ACCESSIBILITY=1
/usr/bin/startxfce4: X server already running on display :0
/usr/bin/iceauth:  creating new authority file /run/user/1000/ICEauthority
xfce4-session-Message: 17:32:29.691: SSH authentication agent is already running
gpg-agent: Ein gpg-agent läuft bereits - ein weiterer wird nicht gestartet
Xfce power manager is not running

[01mHP Linux Imaging and Printing System (ver. 3.22.10)[0m
[01mSystem Tray Status Service ver. 2.0[0m

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


System Tray monitors the HP device status and Displays

[01mUsage: hp-systray [MODE] [OPTIONS][0m


[01m[MODE][0m
  Run in graphical    -u or --gui (Default)                                 
  UI mode:                                                                  

[01m[OPTIONS][0m
  Use Qt5:            --qt5 (Default)                                       
  Set the logging     -l<level> or --logging=<level>                        
  level:                                                                    
                      <level>: none, info*, error, warn, debug (*default)   
  Run in debug mode:  -g (same as option: -ldebug)                          
  This help           -h or --help                                          
  information:                                                              

  Startup even if no  -x or --force-startup                                 
  hplip CUPS queues                                                         
  are present:                                                              

[31;01merror: option -s not recognized[0m

(xfce4-power-manager:1088): xfce4-power-manager-WARNING **: 17:32:31.110: could not map keysym 1008ffa8 to keycode


** (xfce4-power-manager:1088): WARNING **: 17:32:31.153: No outputs have backlight property

(xfce4-power-manager:1088): xfce4-power-manager-WARNING **: 17:32:31.166: Failed to get keyboard max brightness level : GDBus.Error:org.freedesktop.DBus.Error.UnknownMethod: Das Objekt existiert nicht am Pfad »/org/freedesktop/UPower/KbdBacklight«
Xfce-Energieverwaltung: Eine andere Energieverwaltung läuft bereits
Ein anderer Benachrichtigungsdienst läuft – es wird beendet

[01mHP Linux Imaging and Printing System (ver. 3.22.10)[0m
[01mSystem Tray Status Service ver. 2.0[0m

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Geolocation service not in use
Geolocation service in use

** (wrapper-2.0:1092): WARNING **: 17:32:32.155: No outputs have backlight property
ATTENTION: default value of option mesa_glthread overridden by environment.
ATTENTION: default value of option mesa_glthread overridden by environment.
ATTENTION: default value of option mesa_glthread overridden by environment.
ATTENTION: default value of option mesa_glthread overridden by environment.
ATTENTION: default value of option mesa_glthread overridden by environment.
ATTENTION: default value of option mesa_glthread overridden by environment.
ATTENTION: default value of option mesa_glthread overridden by environment.
ATTENTION: default value of option mesa_glthread overridden by environment.
Missing chrome or resource URL: resource://gre/modules/UpdateListener.jsm
Missing chrome or resource URL: resource://gre/modules/UpdateListener.sys.mjs
[GFX1-]: Failed to allocate a surface due to invalid size (CDT) Size(0,0)
[GFX1-]: Failed to allocate a surface due to invalid size (CDT) Size(0,0)
[GFX1-]: Failed to allocate a surface due to invalid size (CDT) Size(0,0)
[2023-07-08T16:30:17Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-08T16:30:17Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-08T16:30:17Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-08T16:30:17Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-08T16:30:48Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-08T16:30:48Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-08T16:30:48Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-08T16:30:48Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-08T16:32:07Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-08T16:32:07Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-08T16:32:08Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-08T16:32:08Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
Missing chrome or resource URL: resource://gre/modules/UpdateListener.jsm
Missing chrome or resource URL: resource://gre/modules/UpdateListener.sys.mjs

(wrapper-2.0:1095): GLib-GObject-CRITICAL **: 18:35:32.108: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
xsession-error:

Code: Alles auswählen

Xsession: X session started for rainer at So 9. Jul 15:18:22 CEST 2023
dbus-update-activation-environment: setting DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
dbus-update-activation-environment: setting DISPLAY=:0
dbus-update-activation-environment: setting XAUTHORITY=/home/rainer/.Xauthority
localuser:rainer being added to access control list
dbus-update-activation-environment: setting XDG_DATA_DIRS=/usr/share/xfce4:/usr/local/share/:/usr/share/
dbus-update-activation-environment: setting GTK_MODULES=gail:atk-bridge
dbus-update-activation-environment: setting QT_ACCESSIBILITY=1
/usr/bin/startxfce4: X server already running on display :0
/usr/bin/iceauth:  creating new authority file /run/user/1000/ICEauthority
xfce4-session-Message: 15:18:23.210: SSH authentication agent is already running
gpg-agent: Ein gpg-agent läuft bereits - ein weiterer wird nicht gestartet
Xfce power manager is not running

[01mHP Linux Imaging and Printing System (ver. 3.22.10)[0m
[01mSystem Tray Status Service ver. 2.0[0m

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


System Tray monitors the HP device status and Displays

[01mUsage: hp-systray [MODE] [OPTIONS][0m


[01m[MODE][0m
  Run in graphical    -u or --gui (Default)                                 
  UI mode:                                                                  

[01m[OPTIONS][0m
  Use Qt5:            --qt5 (Default)                                       
  Set the logging     -l<level> or --logging=<level>                        
  level:                                                                    
                      <level>: none, info*, error, warn, debug (*default)   
  Run in debug mode:  -g (same as option: -ldebug)                          
  This help           -h or --help                                          
  information:                                                              

  Startup even if no  -x or --force-startup                                 
  hplip CUPS queues                                                         
  are present:                                                              

[31;01merror: option -s not recognized[0m

(xfce4-power-manager:1085): xfce4-power-manager-WARNING **: 15:18:24.673: could not map keysym 1008ffa8 to keycode


** (xfce4-power-manager:1085): WARNING **: 15:18:24.693: No outputs have backlight property

(xfce4-power-manager:1085): xfce4-power-manager-WARNING **: 15:18:24.716: Failed to get keyboard max brightness level : GDBus.Error:org.freedesktop.DBus.Error.UnknownMethod: Das Objekt existiert nicht am Pfad »/org/freedesktop/UPower/KbdBacklight«
Xfce-Energieverwaltung: Eine andere Energieverwaltung läuft bereits
Ein anderer Benachrichtigungsdienst läuft – es wird beendet

[01mHP Linux Imaging and Printing System (ver. 3.22.10)[0m
[01mSystem Tray Status Service ver. 2.0[0m

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Geolocation service not in use
Geolocation service in use

** (wrapper-2.0:1087): WARNING **: 15:18:25.618: No outputs have backlight property

(xfce4-panel:1068): xfce4-panel-CRITICAL **: 15:18:45.202: panel-window.c:2366 (panel_window_active_window_geometry_changed): expression 'WNCK_IS_WINDOW (active_window)' failed.
ATTENTION: default value of option mesa_glthread overridden by environment.
ATTENTION: default value of option mesa_glthread overridden by environment.
ATTENTION: default value of option mesa_glthread overridden by environment.
ATTENTION: default value of option mesa_glthread overridden by environment.
ATTENTION: default value of option mesa_glthread overridden by environment.
ATTENTION: default value of option mesa_glthread overridden by environment.
ATTENTION: default value of option mesa_glthread overridden by environment.
ATTENTION: default value of option mesa_glthread overridden by environment.
Missing chrome or resource URL: resource://gre/modules/UpdateListener.jsm
Missing chrome or resource URL: resource://gre/modules/UpdateListener.sys.mjs
[2023-07-09T14:24:19Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-09T14:24:19Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-09T14:24:19Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-09T14:24:19Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-09T14:25:10Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-09T14:25:10Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-09T14:25:10Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-09T14:25:10Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-09T14:26:59Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-09T14:26:59Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-09T14:26:59Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-09T14:26:59Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-09T14:29:39Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-09T14:29:39Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-09T14:29:39Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
[2023-07-09T14:29:39Z ERROR mp4parse] Found 2 nul bytes in "\0\0"
Missing chrome or resource URL: resource://gre/modules/UpdateListener.jsm
Missing chrome or resource URL: resource://gre/modules/UpdateListener.sys.mjs
ATTENTION: default value of option mesa_glthread overridden by environment.
ATTENTION: default value of option mesa_glthread overridden by environment.
ATTENTION: default value of option mesa_glthread overridden by environment.
ATTENTION: default value of option mesa_glthread overridden by environment.
Fontconfig warning: Directory/file mtime in the future. New fonts may not be detected.
Fontconfig warning: Directory/file mtime in the future. New fonts may not be detected.
Fontconfig warning: Directory/file mtime in the future. New fonts may not be detected.

(wrapper-2.0:1089): GLib-GObject-CRITICAL **: 16:35:40.379: g_object_unref: assertion 'G_IS_OBJECT (object)' failed

Benutzeravatar
MSfree
Beiträge: 10777
Registriert: 25.09.2007 19:59:30

Re: Greenscreen bei Acer Monitor und Ideacentre 510-15abr

Beitrag von MSfree » 10.07.2023 17:31:09

/var/log/Xorg.0.log?

rwkraemer
Beiträge: 398
Registriert: 14.08.2005 23:23:40

Re: Greenscreen bei Acer Monitor und Ideacentre 510-15abr

Beitrag von rwkraemer » 10.07.2023 19:35:19

Irgendwie ist es recht lang geworden:

Code: Alles auswählen

[     7.708] (--) Log file renamed from "/var/log/Xorg.pid-785.log" to "/var/log/Xorg.0.log"
[     7.709] 
X.Org X Server 1.21.1.7
X Protocol Version 11, Revision 0
[     7.709] Current Operating System: Linux debian02 6.1.0-10-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.37-1 (2023-07-03) x86_64
[     7.709] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-10-amd64 root=UUID=3d067baa-12d1-4a2a-8f11-8c1e763f72a9 ro quiet
[     7.709] xorg-server 2:21.1.7-3 (https://www.debian.org/support) 
[     7.709] Current version of pixman: 0.42.2
[     7.709] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     7.709] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     7.709] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 10 19:23:01 2023
[     7.709] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     7.710] (==) No Layout section.  Using the first Screen section.
[     7.710] (==) No screen section available. Using defaults.
[     7.710] (**) |-->Screen "Default Screen Section" (0)
[     7.710] (**) |   |-->Monitor "<default monitor>"
[     7.711] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     7.711] (==) Automatically adding devices
[     7.711] (==) Automatically enabling devices
[     7.711] (==) Automatically adding GPU devices
[     7.711] (==) Automatically binding GPU devices
[     7.711] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     7.711] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     7.711] 	Entry deleted from font path.
[     7.713] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[     7.713] (==) ModulePath set to "/usr/lib/xorg/modules"
[     7.713] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     7.713] (II) Loader magic: 0x556f2d39cf00
[     7.713] (II) Module ABI versions:
[     7.713] 	X.Org ANSI C Emulation: 0.4
[     7.713] 	X.Org Video Driver: 25.2
[     7.713] 	X.Org XInput driver : 24.4
[     7.713] 	X.Org Server Extension : 10.0
[     7.713] (++) using VT number 7

[     7.713] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     7.714] (II) xfree86: Adding drm device (/dev/dri/card0)
[     7.714] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/drm/card0
[     7.744] (--) PCI:*(0@0:1:0) 1002:9874:17aa:3100 rev 226, Mem @ 0xe0000000/268435456, 0xf0000000/8388608, 0xfeb00000/262144, I/O @ 0x0000f000/256, BIOS @ 0x????????/131072
[     7.745] (II) LoadModule: "glx"
[     7.745] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     7.750] (II) Module glx: vendor="X.Org Foundation"
[     7.750] 	compiled for 1.21.1.7, module version = 1.0.0
[     7.750] 	ABI class: X.Org Server Extension, version 10.0
[     7.750] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[     7.750] 	loading driver: amdgpu
[     7.750] (==) Matched amdgpu as autoconfigured driver 0
[     7.750] (==) Matched ati as autoconfigured driver 1
[     7.750] (==) Matched modesetting as autoconfigured driver 2
[     7.750] (==) Matched fbdev as autoconfigured driver 3
[     7.750] (==) Matched vesa as autoconfigured driver 4
[     7.750] (==) Assigned the driver to the xf86ConfigLayout
[     7.750] (II) LoadModule: "amdgpu"
[     7.751] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[     7.754] (II) Module amdgpu: vendor="X.Org Foundation"
[     7.754] 	compiled for 1.21.1.7, module version = 23.0.0
[     7.754] 	Module class: X.Org Video Driver
[     7.754] 	ABI class: X.Org Video Driver, version 25.2
[     7.754] (II) LoadModule: "ati"
[     7.754] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[     7.755] (II) Module ati: vendor="X.Org Foundation"
[     7.755] 	compiled for 1.21.1.3, module version = 19.1.0
[     7.755] 	Module class: X.Org Video Driver
[     7.755] 	ABI class: X.Org Video Driver, version 25.2
[     7.774] (II) LoadModule: "modesetting"
[     7.774] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     7.775] (II) Module modesetting: vendor="X.Org Foundation"
[     7.775] 	compiled for 1.21.1.7, module version = 1.21.1
[     7.775] 	Module class: X.Org Video Driver
[     7.775] 	ABI class: X.Org Video Driver, version 25.2
[     7.775] (II) LoadModule: "fbdev"
[     7.775] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     7.775] (II) Module fbdev: vendor="X.Org Foundation"
[     7.775] 	compiled for 1.21.1.3, module version = 0.5.0
[     7.775] 	Module class: X.Org Video Driver
[     7.775] 	ABI class: X.Org Video Driver, version 25.2
[     7.775] (II) LoadModule: "vesa"
[     7.775] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     7.775] (II) Module vesa: vendor="X.Org Foundation"
[     7.776] 	compiled for 1.21.1.3, module version = 2.5.0
[     7.776] 	Module class: X.Org Video Driver
[     7.776] 	ABI class: X.Org Video Driver, version 25.2
[     7.776] (II) AMDGPU: Driver for AMD Radeon:
	All GPUs supported by the amdgpu kernel driver
[     7.776] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     7.776] (II) FBDEV: driver for framebuffer: fbdev
[     7.776] (II) VESA: driver for VESA chipsets: vesa
[     7.796] (WW) Falling back to old probe method for modesetting
[     7.796] (WW) Falling back to old probe method for fbdev
[     7.796] (II) Loading sub module "fbdevhw"
[     7.796] (II) LoadModule: "fbdevhw"
[     7.797] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     7.797] (II) Module fbdevhw: vendor="X.Org Foundation"
[     7.797] 	compiled for 1.21.1.7, module version = 0.0.2
[     7.797] 	ABI class: X.Org Video Driver, version 25.2
[     7.797] (II) AMDGPU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     7.797] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[     7.797] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[     7.797] (==) AMDGPU(0): Default visual is TrueColor
[     7.797] (II) Applying OutputClass "AMDgpu" options to /dev/dri/card0
[     7.797] (==) AMDGPU(0): RGB weight 888
[     7.797] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[     7.797] (--) AMDGPU(0): Chipset: "AMD Radeon R7 Graphics" (ChipID = 0x9874)
[     7.797] (II) Loading sub module "fb"
[     7.797] (II) LoadModule: "fb"
[     7.797] (II) Module "fb" already built-in
[     7.797] (II) Loading sub module "dri2"
[     7.797] (II) LoadModule: "dri2"
[     7.797] (II) Module "dri2" already built-in
[     8.018] (II) Loading sub module "glamoregl"
[     8.018] (II) LoadModule: "glamoregl"
[     8.018] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     8.025] (II) Module glamoregl: vendor="X.Org Foundation"
[     8.025] 	compiled for 1.21.1.7, module version = 1.0.1
[     8.025] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     8.048] (II) AMDGPU(0): glamor X acceleration enabled on AMD Radeon R7 Graphics (carrizo, LLVM 15.0.6, DRM 3.49, 6.1.0-10-amd64)
[     8.049] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[     8.049] (==) AMDGPU(0): TearFree property default: auto
[     8.049] (==) AMDGPU(0): VariableRefresh: disabled
[     8.049] (==) AMDGPU(0): AsyncFlipSecondaries: disabled
[     8.049] (II) AMDGPU(0): KMS Pageflipping: enabled
[     8.049] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[     8.050] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[     8.050] (II) AMDGPU(0): EDID for output DisplayPort-0
[     8.051] (II) AMDGPU(0): EDID for output HDMI-A-0
[     8.051] (II) AMDGPU(0): Manufacturer: ACR  Model: 64a  Serial#: 1952463452
[     8.051] (II) AMDGPU(0): Year: 2017  Week: 46
[     8.051] (II) AMDGPU(0): EDID Version: 1.3
[     8.051] (II) AMDGPU(0): Digital Display Input
[     8.051] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 53  vert.: 30
[     8.051] (II) AMDGPU(0): Gamma: 2.20
[     8.051] (II) AMDGPU(0): DPMS capabilities: StandBy Suspend
[     8.051] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[     8.051] (II) AMDGPU(0): First detailed timing is preferred mode
[     8.051] (II) AMDGPU(0): redX: 0.653 redY: 0.334   greenX: 0.319 greenY: 0.621
[     8.051] (II) AMDGPU(0): blueX: 0.153 blueY: 0.078   whiteX: 0.312 whiteY: 0.328
[     8.051] (II) AMDGPU(0): Supported established timings:
[     8.051] (II) AMDGPU(0): 720x400@70Hz
[     8.051] (II) AMDGPU(0): 640x480@60Hz
[     8.051] (II) AMDGPU(0): 640x480@67Hz
[     8.051] (II) AMDGPU(0): 640x480@72Hz
[     8.051] (II) AMDGPU(0): 640x480@75Hz
[     8.051] (II) AMDGPU(0): 800x600@56Hz
[     8.051] (II) AMDGPU(0): 800x600@60Hz
[     8.051] (II) AMDGPU(0): 800x600@72Hz
[     8.051] (II) AMDGPU(0): 800x600@75Hz
[     8.051] (II) AMDGPU(0): 832x624@75Hz
[     8.051] (II) AMDGPU(0): 1024x768@60Hz
[     8.051] (II) AMDGPU(0): 1024x768@70Hz
[     8.051] (II) AMDGPU(0): 1024x768@75Hz
[     8.051] (II) AMDGPU(0): 1280x1024@75Hz
[     8.051] (II) AMDGPU(0): 1152x864@75Hz
[     8.051] (II) AMDGPU(0): Manufacturer's mask: 0
[     8.052] (II) AMDGPU(0): Supported standard timings:
[     8.052] (II) AMDGPU(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[     8.052] (II) AMDGPU(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[     8.052] (II) AMDGPU(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[     8.052] (II) AMDGPU(0): #3: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[     8.052] (II) AMDGPU(0): #4: hsize: 1280  vsize 800  refresh: 60  vid: 129
[     8.052] (II) AMDGPU(0): #5: hsize: 1440  vsize 900  refresh: 60  vid: 149
[     8.052] (II) AMDGPU(0): #6: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[     8.052] (II) AMDGPU(0): #7: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[     8.052] (II) AMDGPU(0): Supported detailed timing:
[     8.052] (II) AMDGPU(0): clock: 148.5 MHz   Image Size:  527 x 296 mm
[     8.052] (II) AMDGPU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[     8.052] (II) AMDGPU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[     8.052] (II) AMDGPU(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
[     8.052] (II) AMDGPU(0): Monitor name: K242HYL
[     8.052] (II) AMDGPU(0): Serial No: TBNEE0018531
[     8.052] (II) AMDGPU(0): Supported detailed timing:
[     8.052] (II) AMDGPU(0): clock: 148.5 MHz   Image Size:  527 x 296 mm
[     8.052] (II) AMDGPU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[     8.052] (II) AMDGPU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[     8.052] (II) AMDGPU(0): Supported detailed timing:
[     8.052] (II) AMDGPU(0): clock: 74.2 MHz   Image Size:  527 x 296 mm
[     8.052] (II) AMDGPU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[     8.052] (II) AMDGPU(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[     8.052] (II) AMDGPU(0): Supported detailed timing:
[     8.052] (II) AMDGPU(0): clock: 74.2 MHz   Image Size:  527 x 296 mm
[     8.052] (II) AMDGPU(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[     8.052] (II) AMDGPU(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[     8.052] (II) AMDGPU(0): Supported detailed timing:
[     8.052] (II) AMDGPU(0): clock: 27.0 MHz   Image Size:  527 x 296 mm
[     8.052] (II) AMDGPU(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[     8.052] (II) AMDGPU(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[     8.052] (II) AMDGPU(0): Number of EDID sections to follow: 1
[     8.052] (II) AMDGPU(0): EDID (in hex):
[     8.052] (II) AMDGPU(0): 	00ffffffffffff0004724a065c3a6074
[     8.052] (II) AMDGPU(0): 	2e1b010380351e78ca6c40a755519f27
[     8.052] (II) AMDGPU(0): 	145054bfef80714f8140818081c08100
[     8.052] (II) AMDGPU(0): 	9500b300d1c0023a801871382d40582c
[     8.052] (II) AMDGPU(0): 	45000f282100001e000000fd00384c1f
[     8.052] (II) AMDGPU(0): 	5311000a202020202020000000fc004b
[     8.052] (II) AMDGPU(0): 	32343248594c0a2020202020000000ff
[     8.052] (II) AMDGPU(0): 	0054424e4545303031383533310a016b
[     8.052] (II) AMDGPU(0): 	020322f14f9001020304050607111213
[     8.052] (II) AMDGPU(0): 	1415161f230907078301000065030c00
[     8.052] (II) AMDGPU(0): 	1000023a801871382d40582c45000f28
[     8.052] (II) AMDGPU(0): 	2100001e011d8018711c1620582c2500
[     8.052] (II) AMDGPU(0): 	0f282100009e011d007251d01e206e28
[     8.052] (II) AMDGPU(0): 	55000f282100001e8c0ad08a20e02d10
[     8.052] (II) AMDGPU(0): 	103e96000f2821000018000000000000
[     8.052] (II) AMDGPU(0): 	00000000000000000000000000000005
[     8.052] (II) AMDGPU(0): Printing probed modes for output HDMI-A-0
[     8.052] (II) AMDGPU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[     8.052] (II) AMDGPU(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     8.052] (II) AMDGPU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     8.052] (II) AMDGPU(0): Output DisplayPort-0 disconnected
[     8.052] (II) AMDGPU(0): Output HDMI-A-0 connected
[     8.052] (II) AMDGPU(0): Using exact sizes for initial modes
[     8.052] (II) AMDGPU(0): Output HDMI-A-0 using initial mode 1920x1080 +0+0
[     8.052] (II) AMDGPU(0): mem size init: gart size :d6364800 vram size: s:3ea33000 visible:3ea33000
[     8.053] (==) AMDGPU(0): DPI set to (96, 96)
[     8.053] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[     8.053] (II) Loading sub module "ramdac"
[     8.053] (II) LoadModule: "ramdac"
[     8.053] (II) Module "ramdac" already built-in
[     8.053] (II) UnloadModule: "modesetting"
[     8.053] (II) Unloading modesetting
[     8.053] (II) UnloadModule: "fbdev"
[     8.053] (II) Unloading fbdev
[     8.053] (II) UnloadSubModule: "fbdevhw"
[     8.053] (II) Unloading fbdevhw
[     8.053] (II) UnloadModule: "vesa"
[     8.053] (II) Unloading vesa
[     8.054] (II) AMDGPU(0): [DRI2] Setup complete
[     8.054] (II) AMDGPU(0): [DRI2]   DRI driver: radeonsi
[     8.054] (II) AMDGPU(0): [DRI2]   VDPAU driver: radeonsi
[     8.054] (II) AMDGPU(0): Front buffer pitch: 7680 bytes
[     8.054] (II) AMDGPU(0): SYNC extension fences enabled
[     8.054] (II) AMDGPU(0): Present extension enabled
[     8.054] (==) AMDGPU(0): DRI3 enabled
[     8.054] (==) AMDGPU(0): Backing store enabled
[     8.055] (II) AMDGPU(0): Direct rendering enabled
[     8.071] (II) AMDGPU(0): Use GLAMOR acceleration.
[     8.071] (II) AMDGPU(0): Acceleration enabled
[     8.071] (==) AMDGPU(0): DPMS enabled
[     8.071] (==) AMDGPU(0): Silken mouse enabled
[     8.072] (II) AMDGPU(0): Set up textured video (glamor)
[     8.090] (WW) AMDGPU(0): Option "HotplugDriver" is not used
[     8.091] (II) Initializing extension Generic Event Extension
[     8.091] (II) Initializing extension SHAPE
[     8.091] (II) Initializing extension MIT-SHM
[     8.091] (II) Initializing extension XInputExtension
[     8.091] (II) Initializing extension XTEST
[     8.092] (II) Initializing extension BIG-REQUESTS
[     8.092] (II) Initializing extension SYNC
[     8.092] (II) Initializing extension XKEYBOARD
[     8.092] (II) Initializing extension XC-MISC
[     8.092] (II) Initializing extension SECURITY
[     8.092] (II) Initializing extension XFIXES
[     8.092] (II) Initializing extension RENDER
[     8.092] (II) Initializing extension RANDR
[     8.093] (II) Initializing extension COMPOSITE
[     8.093] (II) Initializing extension DAMAGE
[     8.093] (II) Initializing extension MIT-SCREEN-SAVER
[     8.093] (II) Initializing extension DOUBLE-BUFFER
[     8.093] (II) Initializing extension RECORD
[     8.093] (II) Initializing extension DPMS
[     8.093] (II) Initializing extension Present
[     8.093] (II) Initializing extension DRI3
[     8.093] (II) Initializing extension X-Resource
[     8.094] (II) Initializing extension XVideo
[     8.094] (II) Initializing extension XVideo-MotionCompensation
[     8.094] (II) Initializing extension SELinux
[     8.094] (II) SELinux: Disabled on system
[     8.094] (II) Initializing extension GLX
[     8.102] (II) AIGLX: Loaded and initialized radeonsi
[     8.102] (II) GLX: Initialized DRI2 GL provider for screen 0
[     8.102] (II) Initializing extension XFree86-VidModeExtension
[     8.102] (II) Initializing extension XFree86-DGA
[     8.102] (II) Initializing extension XFree86-DRI
[     8.102] (II) Initializing extension DRI2
[     8.103] (II) AMDGPU(0): Setting screen physical size to 508 x 285
[     8.226] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     8.226] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     8.226] (II) LoadModule: "libinput"
[     8.226] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     8.230] (II) Module libinput: vendor="X.Org Foundation"
[     8.230] 	compiled for 1.21.1.3, module version = 1.2.1
[     8.230] 	Module class: X.Org XInput Driver
[     8.230] 	ABI class: X.Org XInput driver, version 24.4
[     8.230] (II) Using input driver 'libinput' for 'Power Button'
[     8.230] (**) Power Button: always reports core events
[     8.230] (**) Option "Device" "/dev/input/event1"
[     8.235] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     8.235] (II) event1  - Power Button: device is a keyboard
[     8.235] (II) event1  - Power Button: device removed
[     8.260] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[     8.260] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     8.260] (**) Option "xkb_model" "pc105"
[     8.260] (**) Option "xkb_layout" "de"
[     8.290] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     8.290] (II) event1  - Power Button: device is a keyboard
[     8.290] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[     8.290] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     8.290] (II) Using input driver 'libinput' for 'Video Bus'
[     8.290] (**) Video Bus: always reports core events
[     8.290] (**) Option "Device" "/dev/input/event3"
[     8.291] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[     8.291] (II) event3  - Video Bus: device is a keyboard
[     8.292] (II) event3  - Video Bus: device removed
[     8.324] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input6/event3"
[     8.324] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     8.324] (**) Option "xkb_model" "pc105"
[     8.324] (**) Option "xkb_layout" "de"
[     8.325] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[     8.325] (II) event3  - Video Bus: device is a keyboard
[     8.326] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[     8.326] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     8.326] (II) Using input driver 'libinput' for 'Video Bus'
[     8.326] (**) Video Bus: always reports core events
[     8.326] (**) Option "Device" "/dev/input/event2"
[     8.327] (II) event2  - Video Bus: is tagged by udev as: Keyboard
[     8.327] (II) event2  - Video Bus: device is a keyboard
[     8.328] (II) event2  - Video Bus: device removed
[     8.344] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input5/event2"
[     8.344] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     8.344] (**) Option "xkb_model" "pc105"
[     8.344] (**) Option "xkb_layout" "de"
[     8.347] (II) event2  - Video Bus: is tagged by udev as: Keyboard
[     8.348] (II) event2  - Video Bus: device is a keyboard
[     8.349] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     8.350] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     8.350] (II) Using input driver 'libinput' for 'Power Button'
[     8.350] (**) Power Button: always reports core events
[     8.350] (**) Option "Device" "/dev/input/event0"
[     8.352] (II) event0  - Power Button: is tagged by udev as: Keyboard
[     8.352] (II) event0  - Power Button: device is a keyboard
[     8.352] (II) event0  - Power Button: device removed
[     8.376] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event0"
[     8.376] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[     8.376] (**) Option "xkb_model" "pc105"
[     8.376] (**) Option "xkb_layout" "de"
[     8.379] (II) event0  - Power Button: is tagged by udev as: Keyboard
[     8.379] (II) event0  - Power Button: device is a keyboard
[     8.381] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event9)
[     8.381] (II) No input driver specified, ignoring this device.
[     8.381] (II) This device may have been added with another device file.
[     8.382] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event10)
[     8.382] (II) No input driver specified, ignoring this device.
[     8.382] (II) This device may have been added with another device file.
[     8.383] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event11)
[     8.383] (II) No input driver specified, ignoring this device.
[     8.383] (II) This device may have been added with another device file.
[     8.384] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event12)
[     8.384] (II) No input driver specified, ignoring this device.
[     8.384] (II) This device may have been added with another device file.
[     8.385] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event13)
[     8.385] (II) No input driver specified, ignoring this device.
[     8.385] (II) This device may have been added with another device file.
[     8.386] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event14)
[     8.386] (II) No input driver specified, ignoring this device.
[     8.386] (II) This device may have been added with another device file.
[     8.388] (II) config/udev: Adding input device PixArt lenovo USB Optical Mouse (/dev/input/event4)
[     8.388] (**) PixArt lenovo USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[     8.388] (II) Using input driver 'libinput' for 'PixArt lenovo USB Optical Mouse'
[     8.388] (**) PixArt lenovo USB Optical Mouse: always reports core events
[     8.388] (**) Option "Device" "/dev/input/event4"
[     8.392] (II) event4  - PixArt lenovo USB Optical Mouse: is tagged by udev as: Mouse
[     8.393] (II) event4  - PixArt lenovo USB Optical Mouse: device is a pointer
[     8.393] (II) event4  - PixArt lenovo USB Optical Mouse: device removed
[     8.424] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:17EF:608D.0001/input/input7/event4"
[     8.424] (II) XINPUT: Adding extended input device "PixArt lenovo USB Optical Mouse" (type: MOUSE, id 10)
[     8.424] (**) Option "AccelerationScheme" "none"
[     8.424] (**) PixArt lenovo USB Optical Mouse: (accel) selected scheme none/0
[     8.424] (**) PixArt lenovo USB Optical Mouse: (accel) acceleration factor: 2.000
[     8.424] (**) PixArt lenovo USB Optical Mouse: (accel) acceleration threshold: 4
[     8.429] (II) event4  - PixArt lenovo USB Optical Mouse: is tagged by udev as: Mouse
[     8.429] (II) event4  - PixArt lenovo USB Optical Mouse: device is a pointer
[     8.432] (II) config/udev: Adding input device PixArt lenovo USB Optical Mouse (/dev/input/mouse0)
[     8.432] (II) No input driver specified, ignoring this device.
[     8.432] (II) This device may have been added with another device file.
[     8.434] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event5)
[     8.434] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[     8.434] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[     8.434] (**) Logitech USB Keyboard: always reports core events
[     8.434] (**) Option "Device" "/dev/input/event5"
[     8.438] (II) event5  - Logitech USB Keyboard: is tagged by udev as: Keyboard
[     8.438] (II) event5  - Logitech USB Keyboard: device is a keyboard
[     8.439] (II) event5  - Logitech USB Keyboard: device removed
[     8.456] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C31C.0002/input/input8/event5"
[     8.456] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)
[     8.456] (**) Option "xkb_model" "pc105"
[     8.456] (**) Option "xkb_layout" "de"
[     8.461] (II) event5  - Logitech USB Keyboard: is tagged by udev as: Keyboard
[     8.461] (II) event5  - Logitech USB Keyboard: device is a keyboard
[     8.464] (II) config/udev: Adding input device Logitech USB Keyboard System Control (/dev/input/event7)
[     8.464] (**) Logitech USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[     8.464] (II) Using input driver 'libinput' for 'Logitech USB Keyboard System Control'
[     8.464] (**) Logitech USB Keyboard System Control: always reports core events
[     8.464] (**) Option "Device" "/dev/input/event7"
[     8.468] (II) event7  - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[     8.468] (II) event7  - Logitech USB Keyboard System Control: device is a keyboard
[     8.469] (II) event7  - Logitech USB Keyboard System Control: device removed
[     8.496] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C31C.0003/input/input10/event7"
[     8.496] (II) XINPUT: Adding extended input device "Logitech USB Keyboard System Control" (type: KEYBOARD, id 12)
[     8.496] (**) Option "xkb_model" "pc105"
[     8.496] (**) Option "xkb_layout" "de"
[     8.501] (II) event7  - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[     8.501] (II) event7  - Logitech USB Keyboard System Control: device is a keyboard
[     8.504] (II) config/udev: Adding input device Logitech USB Keyboard Consumer Control (/dev/input/event6)
[     8.504] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[     8.504] (II) Using input driver 'libinput' for 'Logitech USB Keyboard Consumer Control'
[     8.504] (**) Logitech USB Keyboard Consumer Control: always reports core events
[     8.504] (**) Option "Device" "/dev/input/event6"
[     8.508] (II) event6  - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[     8.508] (II) event6  - Logitech USB Keyboard Consumer Control: device is a keyboard
[     8.509] (II) event6  - Logitech USB Keyboard Consumer Control: device removed
[     8.540] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C31C.0003/input/input9/event6"
[     8.540] (II) XINPUT: Adding extended input device "Logitech USB Keyboard Consumer Control" (type: KEYBOARD, id 13)
[     8.540] (**) Option "xkb_model" "pc105"
[     8.540] (**) Option "xkb_layout" "de"
[     8.545] (II) event6  - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[     8.545] (II) event6  - Logitech USB Keyboard Consumer Control: device is a keyboard
[     8.547] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[     8.547] (II) No input driver specified, ignoring this device.
[     8.547] (II) This device may have been added with another device file.
[     8.548] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event15)
[     8.548] (**) ACPI Virtual Keyboard Device: Applying InputClass "libinput keyboard catchall"
[     8.548] (II) Using input driver 'libinput' for 'ACPI Virtual Keyboard Device'
[     8.548] (**) ACPI Virtual Keyboard Device: always reports core events
[     8.548] (**) Option "Device" "/dev/input/event15"
[     8.550] (II) event15 - ACPI Virtual Keyboard Device: is tagged by udev as: Keyboard
[     8.550] (II) event15 - ACPI Virtual Keyboard Device: device is a keyboard
[     8.551] (II) event15 - ACPI Virtual Keyboard Device: device removed
[     8.564] (**) Option "config_info" "udev:/sys/devices/virtual/input/input18/event15"
[     8.564] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 14)
[     8.564] (**) Option "xkb_model" "pc105"
[     8.564] (**) Option "xkb_layout" "de"
[     8.566] (II) event15 - ACPI Virtual Keyboard Device: is tagged by udev as: Keyboard
[     8.566] (II) event15 - ACPI Virtual Keyboard Device: device is a keyboard

rwkraemer
Beiträge: 398
Registriert: 14.08.2005 23:23:40

Re: Greenscreen bei Acer Monitor und Ideacentre 510-15abr

Beitrag von rwkraemer » 13.07.2023 20:15:39

ich wollte nur noch hinzufügen, dass ich gestern eine alte Nvidia-Karte (Geforce GT730) in den PC eingebaut habe. Bis jetzt habe ich den PC damit zwei oder dreimal gebootet, und mir ist nichts aufgefallen.

Antworten