INFO
Ralink MT7601 https://en.sekorm.com/doc/3400211.html
Date of Creation:2012-08-26
●General Descriptions
■The MT7601is a highly integrated Wi-Fi single chip which supports 150 Mbps PHY rate. It fully complies with IEEE 802.11n and IEEE 802.11 b/g standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.
■Optimized RF architecture and baseband algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient DMA engine and hardware data processing accelerators which offloads the host processor.
■The MT7601 is designed to support standard based features in the areas of security, quality of service and international regulations, giving end users the greatest performance any time and in any circumstance.
●Features
■IEEE 802.11 b/g/n client
■Embedded high-performance 32-bit RISC microprocessor
■Highly integrated RF with 55nm CMOS technology
■1T1R mode with support of 150Mbps PHY rate
■Integrate high efficiency switching regulator
■Best-in-class power consumption performance
■Compact 5mm x 5mm QFN40L package
■1/2/3/4-wire PTA Wi-Fi / Bluetooth coexistence support
■802.11 d/h/k compliant
■Security support for WFA WPA/WPA2 personal, WPS2.0, WAPI
■Supports 802.11w protected managed frames
■QoS support of WFA WMM, WMM PS
■Supports Wi-Fi Direct
■Fully compliance with USB v2.0 High-speed mode
■Per packet transmit power control
■Antenna diversity
■Auto-calibration
Realtek RTL8188FTV https://en.sekorm.com/doc/2037649.html
Date of Creation:2016-02-29
●Overview
■F88FTUM13-W3 is a highly integrated and excellent performance Wireless LAN (WLAN) USB2.0 network interface device. High-speed wireless connection up to 150 Mbps.
■The general hardware for the module is shown in Figure 1. This WLAN Module design is based on Realtek RTL8188FTV. It is a highly integrated single-chip 1*1 MIMO (Multiple In Multiple Out) Wireless LAN (WLAN) USB2.0 network interface controller complying with the 802.11n specification. It combines a MAC, a 1T1R capable baseband, and RF in a single chip. It is designed to provide excellent performance with low power Consumption and enhance the advantages of robust system and cost-effective.
●Product Features
■Operate at ISM frequency bands (2.4GHz)
■USB Interface for WiFi
■IEEE standards support: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n,
■Enterprise level security which can apply WPA/WPA2 certification for WiFi.
■WiFi 1 transmitter and 1 receiver allow data rates supporting up to 150 Mbps downstream and 150 Mbps upstream PHY rates