ich bin irgendwie zu doof das zu deuten und für mich sieht das erstmal alles gut soweit aus, daher frage ich mich warum ich den exit-code 4 bekomme:
Code: Alles auswählen
smartctl -a /dev/sda; echo $?
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-18-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Dell Certified Intel S4x00/D3-S4x10 Series SSDs
Device Model: SSDSC2KB480G7R
Serial Number: PHYS7310027M480BGN
LU WWN Device Id: 5 5cd2e4 14e1ddd18
Add. Product Id: DELL(tm)
Firmware Version: SCV1DL53
User Capacity: 480,103,981,056 bytes [480 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database 7.3/5610
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Apr 29 12:20:29 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 2) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 60) minutes.
Conveyance self-test routine
recommended polling time: ( 60) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000e 130 130 039 Old_age Always - 4294967295
5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 54902
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 16
13 Read_Soft_Error_Rate 0x001e 083 073 000 Old_age Always - 281474976710655
170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0
174 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 12
179 Used_Rsvd_Blk_Cnt_Tot 0x0033 100 100 010 Pre-fail Always - 0
180 Unused_Rsvd_Blk_Cnt_Tot 0x0032 100 100 000 Old_age Always - 6857
181 Program_Fail_Cnt_Total 0x003a 100 100 000 Old_age Always - 0
182 Erase_Fail_Count_Total 0x003a 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 25
195 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
201 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 23 (359 5547)
202 End_of_Life 0x0027 100 100 000 Pre-fail Always - 0
225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 7528366
226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 15155
227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 13
228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 3293992
232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0
233 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 7528366
234 Thermal_Throttle_Status 0x0032 100 100 000 Old_age Always - 0/0
241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 7528366
242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 1251587
245 Percent_Life_Remaining 0x0032 086 086 000 Old_age Always - 86
SMART Error Log not supported
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 54641 -
# 2 Extended offline Completed without error 00% 54641 -
# 3 Extended offline Completed without error 00% 52309 -
# 4 Extended offline Completed without error 00% 52308 -
# 5 Short offline Completed without error 00% 43440 -
# 6 Short offline Completed without error 00% 43440 -
# 7 Extended offline Completed without error 00% 43438 -
# 8 Short offline Completed without error 00% 833 -
# 9 Extended offline Aborted by host 00% 833 -
#10 Extended offline Completed without error 00% 1 -
#11 Short offline Aborted by host 00% 1 -
#12 Short offline Completed without error 00% 1 -
#13 Vendor (0x40) Aborted by host 00% 1 -
Read SMART Selective Self-test Log failed: scsi error aborted command
4